JVC DLA-M4000LU manual AV button Quick ALIGN. Quick Alignment button, Lens Lock Ô Unlock switch

Controls and Features (Cont.)

Remote Control Unit

	r				1
q
		QUICK		OPERATE
	e	ALIGN.			2
			AV HIDE
		PRESET		PAGE BACK			QUICK		OPERATE
	w				3		ALIGN.	AV HIDE
	LOCK UNLOCK		M				PRESET	PAGE BACK
				E
		LENS		N
				U/
				E		LOCK UNLOCK		ME
				N
				T
				E			LENS		N
									U/
				R					E
					4				N
									T
									E
									R
		AV	RGB/COMPUTER				AV	RGB/COMPUTER
	p				5
							U	T	+
				+			SHIFT	ZOOM	FOCUS
	9	U	T		6		D	W	–
		SHIFT	ZOOM	FOCUS				LENS
		D	W	–					+	t
			LENS						VOLUME
									–
	8
	7
p AV button			e QUICK ALIGN. (Quick Alignment) button

Use this button to select the devices such as a video connected to the projector’s AV IN (EXT. input) terminal. Each time you press the button, the selection changes as follows:

Use this button to automatically adjust TRACKING, PHASE, H. POS. and V. POS. of the projected video. During the automatic adjustment, QUICK-ALIGNMENT appears on the screen, and disappears after it is finished.

Y/C* VIDEO* YPBPR

*Y/C and VIDEO can be used only when a video board separately sold has been installed.

qLENS LOCK Ô UNLOCK switch

With this switch set at the LOCK position, adjustment operations (focus, zoom or shift) with the remote control are disabled, preventing adjustment contents from being inadvertently changed while the remote control is being used. When adjustment is needed, set the switch to the UNLOCK position.

wPRESET button

While making adjustment on the main or setting menu, use this button to reset the setting of the selected item to the factory-set value. This button works only for numerical settings and does not work for switching ON to OFF.

Memo

Quick alignment function:

Does not work for video input (EXT. IN input terminal) signals. Works only for computer-related (RGB-1 and-2 input terminals) signals.

CAUTION

•Automatic adjustment with the quick alignment function should be done on a bright still-picture screen. This function may not work correctly on a dark screen or motion-picture screen. If adjustment with this function is not satisfactory, adjust TRACKING, PHASE, H. POS. and V. POS. manually (see pages 30, 36 and 37).

rAV HIDE button

Use this button to turn off the video image temporarily. Pressing it again makes the video image to resume.

tNot used with this projector

12