JVC DLA-M4000LU manual Safety Precautions, About burning-in of the D-ILA device

Page 2

Thank you for purchasing this projector. Before using it, read and follow all instructions carefully to take full advantage of the projector's capabilities.

SAFETY PRECAUTIONS

IMPORTANT INFORMATION IMPORTANT SAFEGUARDS

WARNING :

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION :

To reduce the risk of electric shock, do not remove cover. Refer servicing to qualified service personnel.

This projector is equipped with a 3-blade grounding-type plug to satisfy FCC rule. If you are unable to insert the plug into the outlet, contact your electrician.

FCC INFORMATION (U.S.A. only)

CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

About burning-in of the D-ILA device

Do not allow the same still picture to be projected for a long time or an abnormally bright video picture to be projected. Do not project video images with high-intensity or high- contrast on a screen. The video image could be burned in to the D-ILA device.

Use special care when projecting video games or computer program images. There is no problem with ordinary video- cassette playback images.

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT

IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important Safeguards” carefully before use.

All the safety and operating instructions should be read before the product is operated.

The safety and operating instructions should be retained for future reference.

All warnings on the product and in the operating instructions should be adhered to.

All operating instructions should be followed.

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Do not use attachments not recommended by the product manufacturer as they may be hazardous.

Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire, electric shock, or other hazards.

Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount recommended by the manufacturer.

When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator.

Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed, sofa, rug, or similar surface. It should not be placed in a built- in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhered to.)

For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep distance more than 60 cm (19-3/4”).

2

Image 2
Contents For customer Use Serial NoSafety Precautions About burning-in of the D-ILA deviceSafety Precautions Do not allow any unqualified person to install the unitContents Projection lens AccessoriesInformation on separately sold items Video boardControls and Features Front Side / Top Surface / Right SideVents for cooling fans through which warm air comes out Left-hand side / Back SideExhaust vents Control panelControl Panel AV button When a menu is shownSetting button RGB buttonConnector Panel Remote Control Unit AV button Quick ALIGN. Quick Alignment button Lens Lock Ô Unlock switchPreset button AV Hide buttonMenu / Enter Menu Operation Button Installing BatteriesInstall the batteries Open the back coverWhen installing the projector, observe the followings Installing the ProjectorPrecautions for Installation Allowable minimum space requiredOr more Relationship relative to Glass SurfaceReflected light Screen Lens Shift FunctionChange of projection screen according to aspect ratio Center line of the lensRelational table for maximum shift amounts aspect ratio 4 Maximum amount of shiftRelationship of screen size vs. projection distance Adjustable range of the lensProjection Distances and Screen Sizes Video signals Connecting to Various DevicesSignals that Can Be Input to the Projector Computer signalsExample of a basic system Examples of System ConfigurationRGB switcher Projector Computer Also, read the manuals which came with the equipmentRGB output devices Connecting to Computer DevicesDesktop type To remote control Connecting to Devices which Control the ProjectorRemote control when remote control cable is used Remote control cableTo use the projector Connecting the Power Cord SuppliedRemove the power input terminal cover Remove the lens capWhen Turning On the Devices Connected to the Projector Basic Operations Turning on the PowerTurning off the Power Stopped runningWhen you press Computer Adjust the screen sizeWhen you press Video For setting the source, seeWhen using the projector Adjust focusAdjust focus with the remote control’s Focus +/- buttons ¶ For Operating Other FunctionsTo display the Main menu To display the Setting menuProjector’s button To clear the main menuTo display Channel on the screen To use the remote control’s Preset buttonPress AV Hide on the remote control To temporarily erase video imagePress the Setting button of the projector Operating the Setting MenuMaking Basic Settings Press the Setting button to select the desired itemOperating the Main Menu Configuration of the Main Menu Computer-related input Operating the Main Menu Basic Operation of the Main Menu Remote control unitSet adjust the item Press the MENU/ENTER buttonChanging the Color System Press the MENU/ENTER buttonLanguage display Changing the Language DisplayPress the MENU/ENTER button About language displayAdjusting the Pixel Clock Adjustment item Button Adjustment contentAdjusting the Screen Position Main menu appears on the screenWhen computer-related signals are input Adjusting Picture QualityWhen AV signals are input For video system input To adjust multiple items, repeat steps 4Submenu items For computer system inputButton Adjustment content Submenu items of the Options menu are displayed Setting and Adjusting Other Functions OptionsFollowing optional functions can be set adjusted Submenu item OptionsDisplay, the video image resolution becomes coarse Options menuAspect Selected item displayed in text is shown in magenta color Changing Setting the SourceInput mode Factory setting Selected item text display is shown in magenta colorSubmenu When a source setting Dedica TED Source isSource setup menu Press MENU/ENTER to set fixPress MENU/ENTER toward the 5 or ∞ mark to When a source setting User is selectedUser Source setup menu is displayed Select a user areaPress MENU/ENTER to set Setting Up ChannelsPress the MENU/ENTER button to set Line selection menu screen appears Setting Up Channels Line setupWhen Line is selected Line selection menuSource registration screen appears Setting Up Channels Source setupWhen Source is selected Press the MENU/ENTER button Switcher No. setting menu Setting Up Channels SWNo. setupSwitcher number setup menu is displayed Press the page Back button to setPress page Back while no menu is To switch channels using aDIRECT ChannelChanging Channels CH Change DisplayedMark to select the channel CH you Want to switch toLine input, source and switcher number registered to Channel are selectedConnection Setting Up or Changing User SourcesSubmenu item User Source SET UP Press MENU/ENTER toward the 3mark to select the User Name User Source setup menuSubmenu item, User Source Setup menu , appears on ScreenRepeat steps 1 and 2 to enter the user name To delete a user name, overwrite the user name with spacesDisplay Size adjustment menu Setting Up or Changing the Display SizePress MENU/ENTER toward the 2or 3 mark to adjust the item To adjust other items, repeat steps 4Adjustment item Contents of adjustment Remove the filters Cleaning and Replacing the FilterRemove the filter cover screws There are two filters usedAbout Light-Source Lamp Replacement Clean the filtersReinstall the filters Troubleshooting Troubleshooting Is not possible When the emergency indicator starts blinkingRemote control unit Does not workRGB in RGB input SpecificationsEXT. in AV in input Line, D-sub 3-row 15-pin ⋅ Horizontal sync/composite sync signal H/CsVertical sync signal 7Vp-p, 75ΩTop Outside dimensionsDTV-format signals FrontRS-232C terminal Pin assignment Specifications for terminalsTerminal Computer IN-1 PC / Computer OUT TerminalLCT0634-001D V-Ni
Related manuals
Manual 44 pages 4.94 Kb