JVC DLA-M4000LU manual Installing the Projector, Precautions for Installation

Page 14

Installing the Projector

Precautions for Installation

CAUTIONS

Since the projector weighs approx. 70 kg (154 lbs.), be sure to use four or more people when lifting or moving it; otherwise, the projector could possibly drop, causing personal injury and/or damage to the projector.

Do not install the projector in the following places :

There is much water, humidity or dust.

The projector may be subjected to oil smoke or cigarette smoke.

On a soft surface such as a carpet or cushion.

The projector may be subjected to direct sunlight.

Temperature is high or humidity is low.

Allowable operation temperature range: + 5°C to + 40°C (41°F to 104°F)

Allowable relative humidity range:

90% or less (no condensation)

Allowable storage temperature range:

–5°C to +60°C (23°F to 140°F)

When installing the projector, observe the followings:

• Do not use the projector placed on its side or upside down.

The projector can not be used by being placed on its side or upside down ;Otherwise, it could malfunction.

• Use the projector within the installed angle.

Avoid using the projector inclined ±5° or more right-to-left or left-to-right. This could cause color variation or harm the lamp life.

• Do not block the exhaust vents.

Do not use a cover which encloses the projector air-tight or blocks the exhaust vents. Allow sufficient space around the projector. When the projector is enclosed in a space of the following dimensions, use an air conditioner so the temperature inside becomes equal to the outside temperature.

Allowable minimum space required

 

305 mm (12”)

600 mm (23-5/8”)

600 mm (23-5/8”)

 

305 mm (12”)

 

RGB IN-1

 

 

R

RGB IN-2

EXT. IN

Y

G

H/C

 

P /B-Y

B

V

 

P /R-Y

 

 

 

CONTROL

 

RS-232C

 

 

600 mm (23-5/8”)

14

Image 14
Contents For customer Use Serial NoSafety Precautions About burning-in of the D-ILA deviceSafety Precautions Do not allow any unqualified person to install the unitContents Projection lens AccessoriesInformation on separately sold items Video boardControls and Features Front Side / Top Surface / Right SideVents for cooling fans through which warm air comes out Left-hand side / Back SideExhaust vents Control panelControl Panel AV button When a menu is shownSetting button RGB buttonConnector Panel Remote Control Unit AV button Quick ALIGN. Quick Alignment button Lens Lock Ô Unlock switchPreset button AV Hide buttonMenu / Enter Menu Operation Button Installing BatteriesInstall the batteries Open the back coverWhen installing the projector, observe the followings Installing the ProjectorPrecautions for Installation Allowable minimum space requiredOr more Relationship relative to Glass SurfaceReflected light Screen Lens Shift FunctionChange of projection screen according to aspect ratio Center line of the lensRelational table for maximum shift amounts aspect ratio 4 Maximum amount of shiftRelationship of screen size vs. projection distance Adjustable range of the lensProjection Distances and Screen Sizes Video signals Connecting to Various DevicesSignals that Can Be Input to the Projector Computer signalsExample of a basic system Examples of System ConfigurationRGB switcher Projector Computer Also, read the manuals which came with the equipmentRGB output devices Connecting to Computer DevicesDesktop type To remote control Connecting to Devices which Control the ProjectorRemote control when remote control cable is used Remote control cableTo use the projector Connecting the Power Cord SuppliedRemove the power input terminal cover Remove the lens capWhen Turning On the Devices Connected to the Projector Basic Operations Turning on the PowerTurning off the Power Stopped runningWhen you press Computer Adjust the screen sizeWhen you press Video For setting the source, seeWhen using the projector Adjust focusAdjust focus with the remote control’s Focus +/- buttons ¶ For Operating Other FunctionsTo display the Main menu To display the Setting menuProjector’s button To clear the main menuTo display Channel on the screen To use the remote control’s Preset buttonPress AV Hide on the remote control To temporarily erase video imagePress the Setting button of the projector Operating the Setting MenuMaking Basic Settings Press the Setting button to select the desired itemOperating the Main Menu Configuration of the Main Menu Computer-related input Operating the Main Menu Basic Operation of the Main Menu Remote control unitSet adjust the item Press the MENU/ENTER buttonChanging the Color System Press the MENU/ENTER buttonLanguage display Changing the Language DisplayPress the MENU/ENTER button About language displayAdjusting the Pixel Clock Adjustment item Button Adjustment contentAdjusting the Screen Position Main menu appears on the screenWhen computer-related signals are input Adjusting Picture QualityWhen AV signals are input For video system input To adjust multiple items, repeat steps 4Submenu items For computer system inputButton Adjustment content Submenu items of the Options menu are displayed Setting and Adjusting Other Functions OptionsFollowing optional functions can be set adjusted Submenu item OptionsDisplay, the video image resolution becomes coarse Options menuAspect Selected item displayed in text is shown in magenta color Changing Setting the SourceInput mode Factory setting Selected item text display is shown in magenta colorSubmenu When a source setting Dedica TED Source isSource setup menu Press MENU/ENTER to set fixPress MENU/ENTER toward the 5 or ∞ mark to When a source setting User is selectedUser Source setup menu is displayed Select a user areaPress MENU/ENTER to set Setting Up ChannelsPress the MENU/ENTER button to set Line selection menu screen appears Setting Up Channels Line setupWhen Line is selected Line selection menuSource registration screen appears Setting Up Channels Source setupWhen Source is selected Press the MENU/ENTER button Switcher No. setting menu Setting Up Channels SWNo. setupSwitcher number setup menu is displayed Press the page Back button to setPress page Back while no menu is To switch channels using aDIRECT ChannelChanging Channels CH Change DisplayedMark to select the channel CH you Want to switch toLine input, source and switcher number registered to Channel are selectedConnection Setting Up or Changing User SourcesSubmenu item User Source SET UP Press MENU/ENTER toward the 3mark to select the User Name User Source setup menuSubmenu item, User Source Setup menu , appears on ScreenRepeat steps 1 and 2 to enter the user name To delete a user name, overwrite the user name with spacesDisplay Size adjustment menu Setting Up or Changing the Display SizePress MENU/ENTER toward the 2or 3 mark to adjust the item To adjust other items, repeat steps 4Adjustment item Contents of adjustment Remove the filters Cleaning and Replacing the FilterRemove the filter cover screws There are two filters usedAbout Light-Source Lamp Replacement Clean the filtersReinstall the filters Troubleshooting Troubleshooting Is not possible When the emergency indicator starts blinkingRemote control unit Does not workRGB in RGB input SpecificationsEXT. in AV in input Line, D-sub 3-row 15-pin ⋅ Horizontal sync/composite sync signal H/CsVertical sync signal 7Vp-p, 75ΩTop Outside dimensionsDTV-format signals FrontRS-232C terminal Pin assignment Specifications for terminalsTerminal Computer IN-1 PC / Computer OUT TerminalLCT0634-001D V-Ni
Related manuals
Manual 44 pages 4.94 Kb