JVC DLA-M4000LU manual Adjust focus, ¶ For Operating Other Functions, When using the projector

Basic Operations (Cont.)

■Projector’s buttons

MERGENCY AV	RGB	SETTING	QUICK
			ALIGN.

QUICK ALIGN. button

■Remote control unit

		LENS LOCKÔ UNLOCK
		switch
			QUICK ALIGN.
			button
QUICK
ALIGN.		OPERATE
	AV HIDE
PRESET		PAGE BACK
LENS LOCK		N
	M
		E
		N
		U/
UNLOCK		E
		T
		E
		R
AV	RGB/COMPUTER
U	T	+	FOCUS (+/–)
SHIFT	ZOOM	FOCUS
			buttons
D	W	–

LENS

4.Adjust focus

■Adjust focus with the remote control’s FOCUS (+/–) buttons.

When adjusting the focus with the FOCUS buttons, set the LENS LOCKÔUNLOCK switch to the UNLOCK position.

Remote control unit

+

FOCUS

–

Note

•Focus adjustment can also be made on the setting menu. For operating the setting menu, refer to “Making Basic Settings” on page 30.

¶For Operating Other Functions

■To use the quick alignment function

The quick alignment function is used to automatically adjust (set) the screen settings of “TRACKING, PHASE, H. POS. and V. POS.” of computer system input video.

•Use either the remote control’s or projector’s button.

■ When using the remote control unit: Press the QUICK ALIGN. button.

■ When using the projector:

Clear the menu display, and press the projector’s QUICK ALIGN. “ ” and “” buttons at the same time.

*During the automatic adjustment, “QUICK-ALIGNMENT” appears on the screen and disappears automatically after the adjustment is completed.

Remote control unit Projector

QUICK

ALIGN.

QUICK

ALIGN.

Screen display

Q U I C K - A L I G N M E N T

Note

• This function works only for computer system inputs.

CAUTION

•When performing automatic adjustment using the quick alignment function:

Use a bright, still-picture screen. It may not function correctly on a dark or motion-picture screen.

If the condition adjusted by using the quick alignment function is not good, manually adjust TRACKING, PHASE, H. POS. and V. POS. (see pages 30, 36 and 37).

27