JVC DLA-M4000LU Submenu items, For video system input, For computer system input, Picture menu

Operating the Main Menu (Cont.)

Adjusting Picture Quality (Cont.)

■Remote control unit

QUICK
ALIGN.	OPERATE
	AV HIDE
PRESET	PAGE BACK	PAGE BACK button
LENS LOCK
	N
	M
	E
	N
	U
	/
UNLOCK	E
	T
	E
	R	MENU/ENTER button

AV RGB/COMPUTER

U T +

SHIFT ZOOM FOCUS

D W –

LENS

■Submenu items

[PICTURE menu]

P I C T U R E

( N T S C ( 4 8 0 i ) )
B R I G H T N E S S		0
C O N T R A S T		0
S H A R P N E S S		3
C O L O R	–	3
T I N T		1
A L L R E S E T

5 Press MENU/ENTER toward the 2 or 3 mark to adjust the selected item.

■For video system input

•To adjust multiple items, repeat steps 4 and 5.

•To reset all items (to factory-set adjustment values, “0”), press MENU/ENTER toward the 5 or ∞ mark to select “ALL RESET”, and press MENU/ENTER.

•To reset only the selected items (ALL RESET excluded) to the factory-set adjustment value, press the remote control’s PRESET button. The selected item is reset to the factory-set adjustment value.

Adjustment item	Button	Adjustment content
	2	Gets darker.
BRIGHTNESS		(–30 ← 0 ← +30)
	3	Gets brighter.
		(–30 → 0 → +30)
	2	Gets lower.
CONTRAST		(–30 ← 0 ← +30)
	3	Gets higher.
		(–30 → 0 → +30)
	2	Gets softer.
SHARPNESS		(0 ← 7)
	3	Gets sharper.
		(0 → 7)
	2	Gets softer.
COLOR		(–30 ← 0 ← +30)
	3	Gets deeper.
		(–30 → 0 → +30)
	2	Gets reddish.
TINT		(–30 ← 0 ← +30)
	3	Gets greenish.
		(–30 → 0 → +30)
	MENU/	Resets all adjustment values of
ALL RESET		items on the PICTURE menu to
	ENTER	the factory-set values (0).

Notes

•The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode.

•Adjustment items (on the PICTURE menu) are different when AV signals are input and when computer-related signals are input.

Notes

•The adjustment item, TINT, is displayed only for NTSC system. It is not displayed (cannot be adjusted) when PAL or SECAM system signals are input.

•When video signals are input to the COMPUTER IN-2 terminal, adjustment items “COLOR” and “TINT” are indicated but cannot be adjusted.

■For computer system input

•To adjust multiple items, repeat steps 4 and 5.

•To reset all items (to factory-set adjustment values, “0”), press MENU/ENTER toward the 5 or ∞ mark to select “ALL RESET”, and press MENU/ENTER.

•To reset only the selected items (ALL RESET excluded) to the factory-set adjustment value, press the remote control’s PRESET button. The selected item is reset to the factory-set adjustment value.

(To be continued on the next page)

39