JVC DLA-M4000LU AV button, RGB button, Quick ALIGN. button, When a menu is shown, Setting button

Controls and Features (cont.)

Control Panel (Cont.)

1 2 3 4 5 6 7 8 9 p

TEMP

STAND BY OPERATE LAMP EMERGENCY AV RGB SETTING QUICK

ALIGN.

7AV button

Use this button to select a device such as a video deck connected to the EXT. IN terminal of the projector. Each time you press the button, the device selected changes as follows:

Y/C* VIDEO* YPBPR

*Y/C and VIDEO can be used only when a video board separately sold has been installed.

8RGB button

Use this button to select a device connected to the RGB -1 or -2 terminals. Each time you press the button, the selection changes as follows:

RGB 1 RGB 2

pQUICK ALIGN. button

While a menu screen is shown, use this button to adjust the values for the item selected. When no menu is shown, the quick alignment function works.

• When a menu is shown

button: The value for the selected item increases. button: The value for the selected item decreases.

• When no menu is shown

Press the button and button at the same time:

QUICK-ALIGNMENT is displayed on the screen and the quick alignment function works (TRACKING, PHASE, H. POS. and V. POS. are automatically adjusted). When the adjustment is finished, the display goes off automatically.

Memo

The quick alignment function :

•Works for computer input (RGB- 1 and - 2 input terminals) signals.

•Does not work for video input (EXT. IN input terminal) signals.

9SETTING button

Use this button to call up the setting menu. For details, refer to “Making Basic Settings” on page 30.

CAUTION

•Automatic adjustment with the quick alignment function should be done on a bright still-picture screen. This function may not work correctly on a dark screen or motion-picture screen. If adjustment with this function is not satisfactory, adjust TRACKING, PHASE, H. POS. and V. POS. manually (see pages 30, 36 and 37).

9