Knoll Systems HT200 Setting Input Mode to YCbCr or Component Video, Quick starting the projector

Page 20

Setting "INPUT MODE" to "YCbCr" or Component Video

When you have connected the component video (YCbCr) signal output jacks of the video component to the RGB IN connector on the unit (see page 10), set "IMAGE MODE" to "YCbCr" to obtain better picture quality.

1.Select the input source RGB (see page 13).

2.Press MENU to display the main menu.

3.Press the cursor up or down key to select "IMAGE ADJ MENU."

4.Press L-CLICK to display the IMAGE ADJ MENU.

5.Press the cursor up or down key to select "IMAGE MODE."

6.Press L-CLICK to display the IMAGE MODE menu.

7.Press the cursor up or down key to select "INPUT MODE."

8.Press the cursor +/- key to select "YCbCr."

9.Press L-CLICK

The change of settings will be confirmed.

When you display the IMAGE MODE menu next, the following IMAGE MODE menu for YCbCr will be displayed.

Note: After disconnecting the video component from the RGB IN connector and reconnected a computer set "INPUT MODE" to "RGB" in step 8 above.

Adjusting the image from the source connected to the RGB IN connector

The Projector selects the most suitable resolutions as shown in the "Timing Chart" below according to the incoming signals from the RGB IN connector (When "RGB" is set to "STANDARD." See page 22). However, you may need manual adjustment depending on the computer or video component connected to the RGB IN connector (see page 10). If you have any of vertical banding, noise, dot interference, or crosstalk on the projected picture, adjust clock frequency with "PICTURE ADJ" then clock phase with "FINE PICTURE" (see next page). You can also adjust the horizontal and vertical position of the image (see page 26).

Quick starting the projector

The projector can be turned on by switching the main power on the unit (see step 1 on page 13). There is no need to press the remote control POWER ON button or the projector POWER button.

1.Press MENU to display the main menu.

2.Press the cursor up or down key to select “POWER MENU.”

3.Press L-CLICK to display the POWER MENU.

4.Press the cursor up or down key to select “AUTO START,” then press the cursor + key to select “ON” to activate the function.

To deactivate this function, set “AUTO START” to “OFF” by pressing the cursor – key.

Adjusting the image from the source connected to the RGB IN connector

The Projector selects the most suitable resolutions as shown in the "Timing Chart" below according to the incoming signals from the RGB IN connector (When "RGB" is set to "STANDARD." See page 26). However, you may need manual adjustment depending on the computer or video component connected to the RGB IN connector (see pages 11 and 12). If you have any of vertical banding, noise, dot interference, or crosstalk on the projected picture, adjust clock frequency with "PICTURE ADJ" then clock phase with "FINE PICTURE" (see next page). You can also adjust the horizontal and vertical position of the image (see page 22).

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents HT200 Installation Power SupplyCleaning Lamp ReplacementTable of Contents Sharp, clear images Basic HT200 InformationCongratulations On Your Purchase of the HT200 Projector Inserting the batteries Remote ControlRemote control effective range Terminal Connection Panel Projector Part Identification Projector Positioning InstallationCarrying The Projector Projection Distance 43 Video Screen Projection DistanceConnecting Video Equipment Before connectingBefore connecting Connecting a PC or Macintosh Before connectingSome examples of DIP switch settings Modifying the DIP switch for Macintosh settingMacintosh adapter cable DIP switch setting o=ON Operation Using the Projector Before startingWhen the projected image is offset horizontally When the projected image is offset verticallyUsing the adjusters to adjust the height balance Turn on the connected source computer, VCR, DVD player, etcPage Macintosh WindowsMethod Adjusting the volume of the projector speaker Using the laser pointerTurning off the image and muting the sound temporarily Freezing a moving pictureRemote control buttons Projector operation buttons Press the cursor up or down to select Source MenuSource menu appears on the screen Cursor up or down keySelecting the background Adjusting the volumeSelecting a display language Setting Input Mode to YCbCr or Component Video Quick starting the projectorTiming Chart Signal Resolution Sync Dot Clock KHz MHz When you have connected another computer or video component Adjusting the clock frequencyAdjusting the clock phase Selecting the starting mode for the next projector use Resetting the present settings to factory settingsAdjusting the picture elements Input Mode seeSelecting the picture type Input sourceActivating the on-screen function Activating the power saving functionSelecting the wide screen display Resetting all to the factory settings Resetting the lamp use hours to zeroTurning the projector off with on screen functions Checking hours of lamp useSpecifications OpticalElectrical MechanicalTroubleshooting Common Problems & SolutionsReplacing the lamp housing Status Light MessageLamp housing replacement procedure

HT200 specifications

The Knoll Systems HT200 is a sophisticated home theater receiver widely recognized for its blend of advanced audio technologies and user-friendly features. This model is part of Knoll Systems' commitment to delivering high-quality sound and video experiences in residential settings.

One of the standout features of the HT200 is its powerful amplification capabilities. It utilizes a robust multi-channel amplifier that can deliver high wattage per channel, ensuring clear, dynamic sound even at high volumes. This is particularly advantageous for audiophiles and movie enthusiasts who seek an immersive audio experience. The incorporation of high-quality DACs (Digital-to-Analog Converters) further enhances sound fidelity, providing a richer and more accurate audio reproduction.

The HT200 supports a wide range of audio formats, including traditional stereo as well as surround sound formats like Dolby Atmos and DTS:X. This versatility allows users to enjoy a cinematic experience from the comfort of their homes. The receiver can decode these advanced formats, providing users with the ability to create a multi-dimensional audio environment.

In terms of connectivity, the HT200 is equipped with multiple HDMI inputs, allowing it to integrate seamlessly with various devices like Blu-ray players, gaming consoles, and streaming devices. It also supports 4K and HDR video pass-through, ensuring that users can enjoy high-quality visuals without any compromise. Additional connectivity options include Bluetooth, Wi-Fi, and even USB ports, which cater to diverse multimedia sources.

The user interface of the HT200 is designed with accessibility in mind. It offers an intuitive on-screen menu that simplifies the setup process and provides easy navigation. Furthermore, the receiver supports mobile app control, allowing users to manage settings and playback remotely through their smartphones or tablets.

Another notable characteristic of the HT200 is its customizable sound settings. Users can adjust parameters such as equalization and speaker placement, ensuring an optimized audio experience tailored to their specific room acoustics. This level of personalization makes the HT200 an appealing choice for home theater enthusiasts looking to maximize their audio experience.

In summary, the Knoll Systems HT200 is a feature-rich home theater receiver that combines powerful amplification, advanced audio processing, and extensive connectivity options. With its user-friendly interface and customizable sound settings, it stands out as an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents