Knoll Systems HT200 user manual Lamp housing replacement procedure

Page 30

Lamp housing replacement procedure

1.Switch off the main power and unplug the power cord.

2.Wait at least one hour for the lamp to cool.

3.Turn the unit upside down carefully.

4.Loosen the lamp cover securing screw.

5.Slide the lamp cover in the direction of the arrow and remove it.

CAUTION: Do not use a lamp housing other than the Knoll replacement lamp housing. Order this from your Knoll dealer using your projector’s model number (see “Note” below).

6.Loosen the three lamp housing securing screws. (This projector has a safety switch.)

7.Hold the handle then pull the lamp housing upward to remove it.

8.Install the new lamp housing.

9.Secure the lamp housing with the three screws.

10.Replace and secure the lamp cover with the securing screw.

11.Return the unit to the normal position, connect the power cord, and turn on the unit.

12.Reset the lamp time. Select the lamp usage time menu, then press the POWER ON button on the remote control and hold it down for at least ten seconds. (See page 29.)

Note:

When the lamp usage time reaches 1100 hours, it becomes impossible to switch on the power and menus are not

displayed. In this case, press the remote control POWER OFF button for at least 10 seconds in the standby mode. It is possible to confirm whether it has been reset or not by checking whether the STATUS indicator is extinguished (See page 29).

Obtain a replacement lamp from your dealer where the projector was purchased. When ordering a replacement lamp, specify the correct special replacement lamp – model name UP-280DC (Product code 28-685).

Knoll Systems

145 Tyee Drive Point Roberts, WA USA 98281

11791 Machrina Way, Richmond BC Canada V7A 4V3

© Copyright 1999 All Rights Reserved

30

Page 29 Page 30
Image 30
Page 29 Page 30
Contents HT200 Cleaning InstallationPower Supply Lamp ReplacementTable of Contents Basic HT200 Information Congratulations On Your Purchase of the HT200 ProjectorSharp, clear images Remote Control Remote control effective rangeInserting the batteries Terminal Connection Panel Projector Part Identification Installation Carrying The ProjectorProjector Positioning Projection Distance 43 Video Screen Projection DistanceConnecting Video Equipment Before connectingBefore connecting Connecting a PC or Macintosh Before connectingModifying the DIP switch for Macintosh setting Macintosh adapter cable DIP switch setting o=ONSome examples of DIP switch settings Operation Using the Projector Before startingUsing the adjusters to adjust the height balance When the projected image is offset horizontallyWhen the projected image is offset vertically Turn on the connected source computer, VCR, DVD player, etcPage Windows MethodMacintosh Turning off the image and muting the sound temporarily Adjusting the volume of the projector speakerUsing the laser pointer Freezing a moving pictureSource menu appears on the screen Remote control buttons Projector operation buttonsPress the cursor up or down to select Source Menu Cursor up or down keyAdjusting the volume Selecting a display languageSelecting the background Setting Input Mode to YCbCr or Component Video Quick starting the projectorTiming Chart Signal Resolution Sync Dot Clock KHz MHz Adjusting the clock frequency Adjusting the clock phaseWhen you have connected another computer or video component Selecting the starting mode for the next projector use Resetting the present settings to factory settingsSelecting the picture type Adjusting the picture elementsInput Mode see Input sourceActivating the power saving function Selecting the wide screen displayActivating the on-screen function Turning the projector off with on screen functions Resetting all to the factory settingsResetting the lamp use hours to zero Checking hours of lamp useElectrical SpecificationsOptical MechanicalTroubleshooting Common Problems & SolutionsReplacing the lamp housing Status Light MessageLamp housing replacement procedure

HT200 specifications

The Knoll Systems HT200 is a sophisticated home theater receiver widely recognized for its blend of advanced audio technologies and user-friendly features. This model is part of Knoll Systems' commitment to delivering high-quality sound and video experiences in residential settings.

One of the standout features of the HT200 is its powerful amplification capabilities. It utilizes a robust multi-channel amplifier that can deliver high wattage per channel, ensuring clear, dynamic sound even at high volumes. This is particularly advantageous for audiophiles and movie enthusiasts who seek an immersive audio experience. The incorporation of high-quality DACs (Digital-to-Analog Converters) further enhances sound fidelity, providing a richer and more accurate audio reproduction.

The HT200 supports a wide range of audio formats, including traditional stereo as well as surround sound formats like Dolby Atmos and DTS:X. This versatility allows users to enjoy a cinematic experience from the comfort of their homes. The receiver can decode these advanced formats, providing users with the ability to create a multi-dimensional audio environment.

In terms of connectivity, the HT200 is equipped with multiple HDMI inputs, allowing it to integrate seamlessly with various devices like Blu-ray players, gaming consoles, and streaming devices. It also supports 4K and HDR video pass-through, ensuring that users can enjoy high-quality visuals without any compromise. Additional connectivity options include Bluetooth, Wi-Fi, and even USB ports, which cater to diverse multimedia sources.

The user interface of the HT200 is designed with accessibility in mind. It offers an intuitive on-screen menu that simplifies the setup process and provides easy navigation. Furthermore, the receiver supports mobile app control, allowing users to manage settings and playback remotely through their smartphones or tablets.

Another notable characteristic of the HT200 is its customizable sound settings. Users can adjust parameters such as equalization and speaker placement, ensuring an optimized audio experience tailored to their specific room acoustics. This level of personalization makes the HT200 an appealing choice for home theater enthusiasts looking to maximize their audio experience.

In summary, the Knoll Systems HT200 is a feature-rich home theater receiver that combines powerful amplification, advanced audio processing, and extensive connectivity options. With its user-friendly interface and customizable sound settings, it stands out as an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents