Knoll Systems Basic HT200 Information, Congratulations On Your Purchase of the HT200 Projector

Page 4

Basic HT200 Information

Congratulations On Your Purchase of the HT200 Projector!

The HT200 is one of the very best Projectors available today. The HT200 enables you to project precise images up to 300 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, document camera, laser disc player, DVD player, etc. The Projector can be placed on a tabletop or cart, or permanently mounted on the ceiling. You may use the Projector to project images from behind the screen. The supplied remote control can be used as wireless control and with the supplied mouse receiver to operate the mouse functions on your PC or Macintosh.

The features you'll enjoy…

Compatible with following various color systems:

NTSC (U.S. and Canada standard)

PAL (Western Europe and Australia/New Zealand standard)

SECAM (France and Eastern Europe standard)

NTSC4.43 (Middle East country standard)

Superior brightness of 800 ANSI lumens with A4 size and 4.5 kilograms

The DMD and our own optical design interact in a geometric effect to increase the light usage efficiency. Now you can reproduce the 3 basic colors (RGB) required for color reproduction on a single DMD. That means superior brightness, smaller size and lighter weight.

Sharp, clear images

There is no RGB color separation, and the spaces between the individual pixels are not noticeable. That means sharp and clear reproduction of small characters and figures. Take a closer look and notice the difference in quality!

Outstanding beauty when reproducing DVDs and other high picture-quality information sources

Faithful gray scale reproduction makes for more natural image displays. DVD and other high quality image sources bring out the true display capacity of the Projector.

Screen not distorted to a trapezoid (keystoning) when projecting to the height of the line of vision

Because the projection position is already set to the height of the line of vision, there is no distortion of the screen to a trapezoid. Keystone is set at 13 degrees.

Fully compatible with true SVGA; support for XGA using advanced intelligent compression technology

The advanced intelligent compression technology of the HT200 enables it to present clear compression XGA images without any line omission.

The remote control can be used to operate your PC or Macintosh when the supplied remote mouse receiver is connected.

4

Image 4 Contents
HT200 Installation Power SupplyCleaning Lamp ReplacementTable of Contents Congratulations On Your Purchase of the HT200 Projector Basic HT200 InformationSharp, clear images Remote control effective range Remote ControlInserting the batteries Terminal Connection Panel Projector Part Identification Carrying The Projector InstallationProjector Positioning Projection Distance 43 Video Screen Projection DistanceConnecting Video Equipment Before connectingBefore connecting Connecting a PC or Macintosh Before connectingMacintosh adapter cable DIP switch setting o=ON Modifying the DIP switch for Macintosh settingSome examples of DIP switch settings Operation Using the Projector Before startingWhen the projected image is offset horizontally When the projected image is offset verticallyUsing the adjusters to adjust the height balance Turn on the connected source computer, VCR, DVD player, etcPage Method WindowsMacintosh Adjusting the volume of the projector speaker Using the laser pointerTurning off the image and muting the sound temporarily Freezing a moving pictureRemote control buttons Projector operation buttons Press the cursor up or down to select Source MenuSource menu appears on the screen Cursor up or down keySelecting a display language Adjusting the volumeSelecting the background Setting Input Mode to YCbCr or Component Video Quick starting the projectorTiming Chart Signal Resolution Sync Dot Clock KHz MHz Adjusting the clock phase Adjusting the clock frequencyWhen you have connected another computer or video component Selecting the starting mode for the next projector use Resetting the present settings to factory settingsAdjusting the picture elements Input Mode seeSelecting the picture type Input sourceSelecting the wide screen display Activating the power saving functionActivating the on-screen function Resetting all to the factory settings Resetting the lamp use hours to zeroTurning the projector off with on screen functions Checking hours of lamp useSpecifications OpticalElectrical MechanicalTroubleshooting Common Problems & SolutionsReplacing the lamp housing Status Light MessageLamp housing replacement procedure