Knoll Systems HT200 Remote Control, Inserting the batteries, Remote control effective range

Page 5

Remote Control

Inserting the batteries

1)Press firmly and slide the battery cover off.

2)Insert the supplied two batteries (size AA/R6). Ensure that the polarities (+ and -_) of the batteries are aligned correctly. Always replace batteries with fresh alkaline type.

3)Slip the cover back over the batteries until it snaps into place.

Notes

•If the remote control gets wet, wipe it dry immediately.

•Avoid excessive heat and humidity.

•If you will not be using the remote control for a long time, remove the batteries.

•Do not mix new and old or different types of batteries.

•There are operations that can only be carried out by remote control. Handle the remote control carefully.

Remote control effective range

Each side of the projector has a remote sensor. The controllable range is 50 degrees horizontally and 30 degrees vertically relative to a line that is at a right angle to the remote sensor. And the distance between the point of the remote control and remote sensor must be no more than four to five meters (about 15’).

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents HT200 Power Supply InstallationCleaning Lamp ReplacementTable of Contents Sharp, clear images Basic HT200 InformationCongratulations On Your Purchase of the HT200 Projector Inserting the batteries Remote ControlRemote control effective range Terminal Connection Panel Projector Part Identification Projector Positioning InstallationCarrying The Projector Projection Distance Projection Distance 43 Video ScreenBefore connecting Connecting Video EquipmentBefore connecting Before connecting Connecting a PC or MacintoshSome examples of DIP switch settings Modifying the DIP switch for Macintosh settingMacintosh adapter cable DIP switch setting o=ON Before starting Operation Using the ProjectorWhen the projected image is offset vertically When the projected image is offset horizontallyUsing the adjusters to adjust the height balance Turn on the connected source computer, VCR, DVD player, etcPage Macintosh WindowsMethod Using the laser pointer Adjusting the volume of the projector speakerTurning off the image and muting the sound temporarily Freezing a moving picturePress the cursor up or down to select Source Menu Remote control buttons Projector operation buttonsSource menu appears on the screen Cursor up or down keySelecting the background Adjusting the volumeSelecting a display language Quick starting the projector Setting Input Mode to YCbCr or Component VideoTiming Chart Signal Resolution Sync Dot Clock KHz MHz When you have connected another computer or video component Adjusting the clock frequencyAdjusting the clock phase Resetting the present settings to factory settings Selecting the starting mode for the next projector useInput Mode see Adjusting the picture elementsSelecting the picture type Input sourceActivating the on-screen function Activating the power saving functionSelecting the wide screen display Resetting the lamp use hours to zero Resetting all to the factory settingsTurning the projector off with on screen functions Checking hours of lamp useOptical SpecificationsElectrical MechanicalCommon Problems & Solutions TroubleshootingStatus Light Message Replacing the lamp housingLamp housing replacement procedure

HT200 specifications

The Knoll Systems HT200 is a sophisticated home theater receiver widely recognized for its blend of advanced audio technologies and user-friendly features. This model is part of Knoll Systems' commitment to delivering high-quality sound and video experiences in residential settings.

One of the standout features of the HT200 is its powerful amplification capabilities. It utilizes a robust multi-channel amplifier that can deliver high wattage per channel, ensuring clear, dynamic sound even at high volumes. This is particularly advantageous for audiophiles and movie enthusiasts who seek an immersive audio experience. The incorporation of high-quality DACs (Digital-to-Analog Converters) further enhances sound fidelity, providing a richer and more accurate audio reproduction.

The HT200 supports a wide range of audio formats, including traditional stereo as well as surround sound formats like Dolby Atmos and DTS:X. This versatility allows users to enjoy a cinematic experience from the comfort of their homes. The receiver can decode these advanced formats, providing users with the ability to create a multi-dimensional audio environment.

In terms of connectivity, the HT200 is equipped with multiple HDMI inputs, allowing it to integrate seamlessly with various devices like Blu-ray players, gaming consoles, and streaming devices. It also supports 4K and HDR video pass-through, ensuring that users can enjoy high-quality visuals without any compromise. Additional connectivity options include Bluetooth, Wi-Fi, and even USB ports, which cater to diverse multimedia sources.

The user interface of the HT200 is designed with accessibility in mind. It offers an intuitive on-screen menu that simplifies the setup process and provides easy navigation. Furthermore, the receiver supports mobile app control, allowing users to manage settings and playback remotely through their smartphones or tablets.

Another notable characteristic of the HT200 is its customizable sound settings. Users can adjust parameters such as equalization and speaker placement, ensuring an optimized audio experience tailored to their specific room acoustics. This level of personalization makes the HT200 an appealing choice for home theater enthusiasts looking to maximize their audio experience.

In summary, the Knoll Systems HT200 is a feature-rich home theater receiver that combines powerful amplification, advanced audio processing, and extensive connectivity options. With its user-friendly interface and customizable sound settings, it stands out as an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents