Knoll Systems HT200 user manual Replacing the lamp housing, Status Light Message

Page 29

When the STATUS indicator on the projector keypad lights or blinks

Status Light Message

Condition

Status

OFF

Normal

On Continually

The projector lamp has exceeded 1000 hours of

 

operation and should be replaced.

Blinking Very Rapidly (On and off in a

The lamp housing is not correctly installed. Install it

cycle of 1 sec.)

correctly.

Blinking Rapidly

The temperature protector has been triggered. If the

(On and off in a cycle of 4 sec.)

room temperature is high, move the projector to a

 

cool location. If the temperature within the projector

 

is high, check the cooling fan ventilation hole and the

 

ventilation hole on the bottom of the projector. If any

 

holes are blocked, remove whatever is blocking them.

 

The temperature protector has been triggered. If you

 

switch the main Power switch Off, then immediately

 

switch it On again; sometimes the power does not

 

come on. If this happens, wait one minute, and then

 

switch the power On again.

 

The lamp lighting voltage error detection protector

 

has been triggered. Wait at least one minute before

 

switching it on again. If this does not solve the

 

problem, please contact your dealer.

Blinking Slowly (On and off in a cycle of

The cooling fan has stopped. Contact your Knoll

8 sec.)

dealer for service.

Blinking Very Slowly (On and off in a

The lamp is not turned on.

cycle of 12 sec.)

The projector was turned off and back on too quickly.

 

 

Turn off the projector, wait one minute, then turn the

 

projector back on. Or the lamp is burnt out.

Replacing the lamp housing

After the lamp has been operating for 1000 hours or longer, the STATUS indicator on the control panel will light and “LAMP USAGE” icon, which shows hours of total lamp use, will be displayed on the screen. When this happen, turn off the unit and replace the lamp housing with new one. The unit will not be go on after 1100 hours. (It will go off if it is in use.)

***CAUTION***

•DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Allow at least one hour for the lamp to cool before handling.

•DO NOT LOOSEN ANY SCREWS except for those mentioned in the instructions below. There is danger of electric shock.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents HT200 Power Supply InstallationCleaning Lamp ReplacementTable of Contents Sharp, clear images Basic HT200 InformationCongratulations On Your Purchase of the HT200 Projector Inserting the batteries Remote ControlRemote control effective range Terminal Connection Panel Projector Part Identification Projector Positioning InstallationCarrying The Projector Projection Distance Projection Distance 43 Video ScreenBefore connecting Connecting Video EquipmentBefore connecting Before connecting Connecting a PC or MacintoshSome examples of DIP switch settings Modifying the DIP switch for Macintosh settingMacintosh adapter cable DIP switch setting o=ON Before starting Operation Using the ProjectorWhen the projected image is offset vertically When the projected image is offset horizontallyUsing the adjusters to adjust the height balance Turn on the connected source computer, VCR, DVD player, etcPage Macintosh WindowsMethod Using the laser pointer Adjusting the volume of the projector speakerTurning off the image and muting the sound temporarily Freezing a moving picturePress the cursor up or down to select Source Menu Remote control buttons Projector operation buttonsSource menu appears on the screen Cursor up or down keySelecting the background Adjusting the volumeSelecting a display language Quick starting the projector Setting Input Mode to YCbCr or Component VideoTiming Chart Signal Resolution Sync Dot Clock KHz MHz When you have connected another computer or video component Adjusting the clock frequencyAdjusting the clock phase Resetting the present settings to factory settings Selecting the starting mode for the next projector useInput Mode see Adjusting the picture elementsSelecting the picture type Input sourceActivating the on-screen function Activating the power saving functionSelecting the wide screen display Resetting the lamp use hours to zero Resetting all to the factory settingsTurning the projector off with on screen functions Checking hours of lamp useOptical SpecificationsElectrical MechanicalCommon Problems & Solutions TroubleshootingStatus Light Message Replacing the lamp housingLamp housing replacement procedure

HT200 specifications

The Knoll Systems HT200 is a sophisticated home theater receiver widely recognized for its blend of advanced audio technologies and user-friendly features. This model is part of Knoll Systems' commitment to delivering high-quality sound and video experiences in residential settings.

One of the standout features of the HT200 is its powerful amplification capabilities. It utilizes a robust multi-channel amplifier that can deliver high wattage per channel, ensuring clear, dynamic sound even at high volumes. This is particularly advantageous for audiophiles and movie enthusiasts who seek an immersive audio experience. The incorporation of high-quality DACs (Digital-to-Analog Converters) further enhances sound fidelity, providing a richer and more accurate audio reproduction.

The HT200 supports a wide range of audio formats, including traditional stereo as well as surround sound formats like Dolby Atmos and DTS:X. This versatility allows users to enjoy a cinematic experience from the comfort of their homes. The receiver can decode these advanced formats, providing users with the ability to create a multi-dimensional audio environment.

In terms of connectivity, the HT200 is equipped with multiple HDMI inputs, allowing it to integrate seamlessly with various devices like Blu-ray players, gaming consoles, and streaming devices. It also supports 4K and HDR video pass-through, ensuring that users can enjoy high-quality visuals without any compromise. Additional connectivity options include Bluetooth, Wi-Fi, and even USB ports, which cater to diverse multimedia sources.

The user interface of the HT200 is designed with accessibility in mind. It offers an intuitive on-screen menu that simplifies the setup process and provides easy navigation. Furthermore, the receiver supports mobile app control, allowing users to manage settings and playback remotely through their smartphones or tablets.

Another notable characteristic of the HT200 is its customizable sound settings. Users can adjust parameters such as equalization and speaker placement, ensuring an optimized audio experience tailored to their specific room acoustics. This level of personalization makes the HT200 an appealing choice for home theater enthusiasts looking to maximize their audio experience.

In summary, the Knoll Systems HT200 is a feature-rich home theater receiver that combines powerful amplification, advanced audio processing, and extensive connectivity options. With its user-friendly interface and customizable sound settings, it stands out as an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents