Knoll Systems HT200 user manual Selecting the starting mode for the next projector use

Page 23

Storing the most recent “PICTURE ADJ,” “FINE PICTURE,” “H POSITION,” AND “V POSITION” settings

You can store the above present settings in the memory. CUSTOM 1 to 5.

1.Select the input source RGB (see page 13).

2.Press MENU to display the main menu.

3.Press the cursor up or down key to select “SETTING MENU.”

4.Press L-CLICK to display the SETTING MENU.

5.Press the cursor up or down key to select “CUSTOM MEMORY.”

6.Press the cursor +/- key to select the memory CUSTOM 1 to 5.

7.Press L-CLICK to store the settings. The menu will be turned off after storing the settings.

Retrieving data from the custom memory/Setting “RGB” to “STANDARD”

The stored settings in the CUSTOM 1 to 5 memories can be retrieved as follows:

1.Select “RGB” as the input source (see page 13).

2.Press the cursor +/- key to select the memory CUSTOM 1 to 5 or “STANDARD.”

If you select “STANDARD,” the unit will select the most suitable resolution automatically.

3.Press L-CLICK to retrieve the settings.

If the image (and the menu) has disappeared because the wrong custom memory is selected Carry out the following steps.

1.Turn off the source connected to the RGB IN connector. The incoming signals from the source go down and blue, black, or focus pattern screen will be displayed (the background type differs depending on the “BACKGROUND” setting. See page 19.).

2.Select the right custom memory by restarting Retrieving data from the custom memory above.

Selecting the starting mode for the next projector use

Set “STARTING RGB” to “LATEST” to use the most recent settings (RGB STANDARD or CUSTOM 1 to 5) when you turn on the unit next. If you set “STARTING RGB” to “STANDARD,” the unit will select the most suitable resolution every time you turn on the unit.

1.Carry out steps 1 to 4 in “Storing the most recent settings” on the previous page.

2.Press the cursor up or down key to select “STARTING RGB.”

3.Press the cursor +/- key to select either “LATEST” or “STANDARD.”

4.Press L-CLICK. The change of settings will be confirmed.

Resetting the present settings to factory settings

To reset the changed “PICTURE ADJ,” “FINE PICTURE,” “H POSITION,” and “V POSITION” to the factory settings, carry out the following steps.

1.Carry out steps 1 to 4 in “Storing the most recent settings” on the previous page.

2.Press the cursor up or down key to select “RESET.” The horizontal frequency of the present incoming signal appears under the title “RESET.”

3.Press and hold down the cursor + key for more than three seconds until “COMPLETE” appears instead of the horizontal frequency.

Resetting the present settings and all the custom memories to factory settings

Note: If you carry out this procedure, not only the custom memories but also all the menu items except for “LAMP USAGE,” and “LANGUAGE” will be reset.

1.Carry out steps 1 to 4 in “Storing the most recent settings” on the previous page.

2.Press the cursor up or down key to select “ALL RESET.”

3.Press and hold down the cursor + key for more than three seconds until “COMPLETE” appears under the title “ALL RESET.”

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents HT200 Lamp Replacement InstallationPower Supply CleaningTable of Contents Sharp, clear images Basic HT200 InformationCongratulations On Your Purchase of the HT200 Projector Inserting the batteries Remote ControlRemote control effective range Terminal Connection Panel Projector Part Identification Projector Positioning InstallationCarrying The Projector Projection Distance Projection Distance 43 Video ScreenBefore connecting Connecting Video EquipmentBefore connecting Before connecting Connecting a PC or MacintoshSome examples of DIP switch settings Modifying the DIP switch for Macintosh settingMacintosh adapter cable DIP switch setting o=ON Before starting Operation Using the ProjectorTurn on the connected source computer, VCR, DVD player, etc When the projected image is offset horizontallyWhen the projected image is offset vertically Using the adjusters to adjust the height balancePage Macintosh WindowsMethod Freezing a moving picture Adjusting the volume of the projector speakerUsing the laser pointer Turning off the image and muting the sound temporarilyCursor up or down key Remote control buttons Projector operation buttonsPress the cursor up or down to select Source Menu Source menu appears on the screenSelecting the background Adjusting the volumeSelecting a display language Quick starting the projector Setting Input Mode to YCbCr or Component VideoTiming Chart Signal Resolution Sync Dot Clock KHz MHz When you have connected another computer or video component Adjusting the clock frequencyAdjusting the clock phase Resetting the present settings to factory settings Selecting the starting mode for the next projector useInput source Adjusting the picture elementsInput Mode see Selecting the picture typeActivating the on-screen function Activating the power saving functionSelecting the wide screen display Checking hours of lamp use Resetting all to the factory settingsResetting the lamp use hours to zero Turning the projector off with on screen functionsMechanical SpecificationsOptical ElectricalCommon Problems & Solutions TroubleshootingStatus Light Message Replacing the lamp housingLamp housing replacement procedure

HT200 specifications

The Knoll Systems HT200 is a sophisticated home theater receiver widely recognized for its blend of advanced audio technologies and user-friendly features. This model is part of Knoll Systems' commitment to delivering high-quality sound and video experiences in residential settings.

One of the standout features of the HT200 is its powerful amplification capabilities. It utilizes a robust multi-channel amplifier that can deliver high wattage per channel, ensuring clear, dynamic sound even at high volumes. This is particularly advantageous for audiophiles and movie enthusiasts who seek an immersive audio experience. The incorporation of high-quality DACs (Digital-to-Analog Converters) further enhances sound fidelity, providing a richer and more accurate audio reproduction.

The HT200 supports a wide range of audio formats, including traditional stereo as well as surround sound formats like Dolby Atmos and DTS:X. This versatility allows users to enjoy a cinematic experience from the comfort of their homes. The receiver can decode these advanced formats, providing users with the ability to create a multi-dimensional audio environment.

In terms of connectivity, the HT200 is equipped with multiple HDMI inputs, allowing it to integrate seamlessly with various devices like Blu-ray players, gaming consoles, and streaming devices. It also supports 4K and HDR video pass-through, ensuring that users can enjoy high-quality visuals without any compromise. Additional connectivity options include Bluetooth, Wi-Fi, and even USB ports, which cater to diverse multimedia sources.

The user interface of the HT200 is designed with accessibility in mind. It offers an intuitive on-screen menu that simplifies the setup process and provides easy navigation. Furthermore, the receiver supports mobile app control, allowing users to manage settings and playback remotely through their smartphones or tablets.

Another notable characteristic of the HT200 is its customizable sound settings. Users can adjust parameters such as equalization and speaker placement, ensuring an optimized audio experience tailored to their specific room acoustics. This level of personalization makes the HT200 an appealing choice for home theater enthusiasts looking to maximize their audio experience.

In summary, the Knoll Systems HT200 is a feature-rich home theater receiver that combines powerful amplification, advanced audio processing, and extensive connectivity options. With its user-friendly interface and customizable sound settings, it stands out as an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents