Knoll Systems HT200 user manual Installation, Carrying The Projector, Projector Positioning

Page 7

Installation

The distance from the projector lens to the screen determines to the size of the projected image, therefore, you need to consider the place where you set up the projector and screen before making connections. You also need to consider the screen size and height of the unit and screen as other important factors.

Tip: Although not advised, a non-glossy wall may be used as a substitute for a screen.

WARNING

•Carrying The Projector

Ensure that the power cord and any other cables connecting to video sources are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap.

•Only use your Projector on a solid flat level surface. If the projector falls to the ground, you can be injured and the projector severely damaged.

•Do not use the Projector where temperatures vary greatly. The projector must be used at temperatures between 5 degree Celsius (41 degree Fahrenheit) and 35 degree Celsius (95 degree Fahrenheit).

•Do not expose the Projector to moisture, dust, or smoke. This will harm the screen image.

•Ensure that you have adequate ventilation around your Projector to allow heat dissipation. Do not cover the vents on the bottom or the side of the projector.

Projector Positioning

The projected image becomes larger as the distance between the unit and screen increases. The minimum image size is about 24 inches (0.61m) diagonally at a distance of about 1.2m (3 feet) and the maximum size is about 300 inches (7.6m) at a distance of 12.0m (39.37 feet) from the screen. A lens adaptor can be purchased to zoom or wide angle the image a factor of 1.8 times.

Width

13 degrees

Diagonal

Screen

Size

Height

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents HT200 Lamp Replacement InstallationPower Supply CleaningTable of Contents Congratulations On Your Purchase of the HT200 Projector Basic HT200 InformationSharp, clear images Remote control effective range Remote ControlInserting the batteries Terminal Connection Panel Projector Part Identification Carrying The Projector InstallationProjector Positioning Projection Distance Projection Distance 43 Video ScreenBefore connecting Connecting Video EquipmentBefore connecting Before connecting Connecting a PC or MacintoshMacintosh adapter cable DIP switch setting o=ON Modifying the DIP switch for Macintosh settingSome examples of DIP switch settings Before starting Operation Using the ProjectorTurn on the connected source computer, VCR, DVD player, etc When the projected image is offset horizontallyWhen the projected image is offset vertically Using the adjusters to adjust the height balancePage Method WindowsMacintosh Freezing a moving picture Adjusting the volume of the projector speakerUsing the laser pointer Turning off the image and muting the sound temporarilyCursor up or down key Remote control buttons Projector operation buttonsPress the cursor up or down to select Source Menu Source menu appears on the screenSelecting a display language Adjusting the volumeSelecting the background Quick starting the projector Setting Input Mode to YCbCr or Component VideoTiming Chart Signal Resolution Sync Dot Clock KHz MHz Adjusting the clock phase Adjusting the clock frequencyWhen you have connected another computer or video component Resetting the present settings to factory settings Selecting the starting mode for the next projector useInput source Adjusting the picture elementsInput Mode see Selecting the picture typeSelecting the wide screen display Activating the power saving functionActivating the on-screen function Checking hours of lamp use Resetting all to the factory settingsResetting the lamp use hours to zero Turning the projector off with on screen functionsMechanical SpecificationsOptical ElectricalCommon Problems & Solutions TroubleshootingStatus Light Message Replacing the lamp housingLamp housing replacement procedure

HT200 specifications

The Knoll Systems HT200 is a sophisticated home theater receiver widely recognized for its blend of advanced audio technologies and user-friendly features. This model is part of Knoll Systems' commitment to delivering high-quality sound and video experiences in residential settings.

One of the standout features of the HT200 is its powerful amplification capabilities. It utilizes a robust multi-channel amplifier that can deliver high wattage per channel, ensuring clear, dynamic sound even at high volumes. This is particularly advantageous for audiophiles and movie enthusiasts who seek an immersive audio experience. The incorporation of high-quality DACs (Digital-to-Analog Converters) further enhances sound fidelity, providing a richer and more accurate audio reproduction.

The HT200 supports a wide range of audio formats, including traditional stereo as well as surround sound formats like Dolby Atmos and DTS:X. This versatility allows users to enjoy a cinematic experience from the comfort of their homes. The receiver can decode these advanced formats, providing users with the ability to create a multi-dimensional audio environment.

In terms of connectivity, the HT200 is equipped with multiple HDMI inputs, allowing it to integrate seamlessly with various devices like Blu-ray players, gaming consoles, and streaming devices. It also supports 4K and HDR video pass-through, ensuring that users can enjoy high-quality visuals without any compromise. Additional connectivity options include Bluetooth, Wi-Fi, and even USB ports, which cater to diverse multimedia sources.

The user interface of the HT200 is designed with accessibility in mind. It offers an intuitive on-screen menu that simplifies the setup process and provides easy navigation. Furthermore, the receiver supports mobile app control, allowing users to manage settings and playback remotely through their smartphones or tablets.

Another notable characteristic of the HT200 is its customizable sound settings. Users can adjust parameters such as equalization and speaker placement, ensuring an optimized audio experience tailored to their specific room acoustics. This level of personalization makes the HT200 an appealing choice for home theater enthusiasts looking to maximize their audio experience.

In summary, the Knoll Systems HT200 is a feature-rich home theater receiver that combines powerful amplification, advanced audio processing, and extensive connectivity options. With its user-friendly interface and customizable sound settings, it stands out as an excellent choice for anyone looking to elevate their home entertainment experience.
Top Page Image Contents