Elation Professional 250B user manual Power Wash

Page 6

Power Wash 250™

WARRANTY REGISTRATION: The Power Wash 250B™carries a two year (730 days) limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre- paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the return package. A brief description of the problem as well as the R.A. number should also be included in the shipping container. If the fixture is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by contacting customer support at (323) 582-3322.

DISCHARGE LAMP WARNING: This fixture is fitted with a discharge lamp, which is highly susceptible to damage if improperly handled. Never touch the lamp with your bare hands, as the oil from your hands will shorten lamp life. Also, never move the fixture until the lamps have had ample time to cool. Remember, lamps are not covered under warranty conditions.

This fixture emits intense UV radiation, which is harmful to the eyes and skin. The intense luminance of the lamp can cause severe damage to the retina. Never operate this fixture with the protective covers removed, these covers have been specially designed to shield against UV radiation.

Avoid switching the fixture on and off repeatedly in short intervals, as this will reduce lamp life and intensity.

To achieve the intensity associated with discharge lamps, these lamps use gas sealed in a high-pressure environment to emit a brilliant output. Due to the high pressure involved with the construction of the lamp, the lamp may explode during prolonged extensive use. This risk is increased with age; added care is encouraged when dealing with older lamps. Extreme caution should be used when operated this or any fixture fitted with a gas discharge lamp.

Epileptic Warning: Those suffering from epilepsy should avoid looking directly into the lamp at all times.

Never open this fixture while in use!

During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture. This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp.

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com

-

Page 6

Image 6
Contents Software Version Revised 6/2003 Power Wash Table of contents Color Wheel Oreintation Technical Specification Warranty DMX Channel Selection DMX Protocol Service and MaintenanceFuse Replacement Maintenance and Cleaning OperationMailsupport@ElationLighting.com Power Wash Safety Instructions Features and Functions Power Wash Installation Mounting Securing the Power Wash Power supply ConnectionsPower Wash Fuse Requirements Menu Field Level D001Tilt Clre Dfse Feed EflgAdjust the DMX- Address D001 Test Program TestAudio Program Audi Time LampRese FcolManu RtltSpec 000 255Dmxi LaauDlof DispTemp FansAdju Dfse99 + Feed EflgDMX control mode Stand alone modeMaster/Slave mode OperationPower Wash DMX Channel Selection DMX Protocol DMX HEXLamp OFF Safety Guidelines Lamp ChangeRemoving the Lamp Lamp OptimizationPower Wash Fuse Replacement Maintenance and Cleaning the Power Wash 250B 1Safety RegulationsCleaning Frequency rule-of-thumb Page Power Wash Color Wheel Orientation Technical Specification Year 730 Days Limited Warranty Power Wash Power Wash Power Wash