Elation Professional 250B user manual Adju, Dfse, 99 +

Page 23

Power Wash 250™

3.10.8 Adjustments and Calibrations (ADJU)

ADJU

With this function you can adjust and calibrate the positions of the different wheels and other motors. This feature is reserved for a service technician and is sometimes required after a service or repair work.

This function requires a service code only available to authorized service technicians.

Use the Up and Down buttons to select the function that requires calibration and press the Enter button to confirm the adjustment or the Mode button to cancel and return to the menu. Use the Up and Down buttons to set the adjustment values and confirm once more with the Enter button or use the Mode button to cancel the operation.

Function

Value

COLO

- 99 - + 99

CLRE

Adjustments in the internal circuit.

FACC

Must read ON

ARES

Adjust- Reset

 

 

Remark

Color wheel

Authorized Personal

only. Refer to the Service manual

3.10.9 Default Settings (DFSE)

DFSE

This function is used to restore all the factory default settings and presets. Press the Enter button to confirm this operation or the Mode button to cancel and return to the menu. When this operation is selected the LED will briefly readout ok, then return to the previous function. The chart below details the factory defaults.

Function

Display

DMX Address

D001

Pan reverse

RPAN

Tilt reverse

RTLT

Automatic lamp on

LAAU

Lamp on via DMX

DLOF

Display

DISP

Cooling fan

FANS

Feedback

FEED

Default Settings

D001

 

ON

OFF

 

ON

OFF

 

ON

OFF

ON

OFF

D

ON

 

 

HIGH

 

REG

LOOF

LOHI

ON

OFF

©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com

-

Page 23

Image 23
Contents Software Version Revised 6/2003 Power Wash Table of contents Operation DMX Channel Selection DMX Protocol Service and MaintenanceFuse Replacement Maintenance and Cleaning Color Wheel Oreintation Technical Specification WarrantyMailsupport@ElationLighting.com Power Wash Safety Instructions Features and Functions Power Wash Installation Mounting Securing the Power Wash Connections Power supplyPower Wash Fuse Requirements Tilt Menu FieldLevel D001 Dfse Feed Eflg ClreAudio Program Audi Adjust the DMX- Address D001Test Program Test Fcol LampRese Time000 255 RtltSpec ManuDisp LaauDlof DmxiFans Temp99 + AdjuDfse Eflg FeedOperation Stand alone modeMaster/Slave mode DMX control modePower Wash DMX HEX DMX Channel Selection DMX ProtocolLamp OFF Lamp Change Safety GuidelinesLamp Optimization Removing the LampPower Wash Fuse Replacement Cleaning Frequency rule-of-thumb Maintenance and Cleaning the Power Wash 250B1Safety Regulations Page Power Wash Color Wheel Orientation Technical Specification Year 730 Days Limited Warranty Power Wash Power Wash Power Wash