Power Wash | Elation Professional 250B guide

Power Wash 250™

1.Lens Assembly - This high quality lens assembly is fully focusing. Focus the lens by loosening the locking screws mounted on the top and bottom of the head assembly. Then using the screws to grasp the lens assembly, slide the lens back and forth until the desired focus is achieved. Then tighten down on the locking screws to retaining your focus.

2.Retaining Arm – This Arm serves as a conduit for all electronic from the base to the head assembly.

3.Base – The fixture base holds all the main electronics for the fixture and provides a means to secure the fixture to a wall or ceiling.

4.Carrying Handles - Be sure to always carry the fixture by the built-in handles. Never lift or carrying the fixture by the head or yoke. Pulling on or transporting the fixture by the head assembly may severely damage the fixture and will void the fixture warranty.

5.Up Button - This button is used to scroll forward when navigating through the system menu.

6.Down Button - This button is used to scroll backwards when navigating through the system menu.

7.Enter Button - This button is used to select and confirm a function when working in the system menu.

8.Mode Button – This button is used to access the fixture’s main system menu and programming functions.

9.LED Display – This display is used to detail the menu and operating functions.

10.Firmware Connection – This connection is to be used solely by a qualified technician to upgrade and test the fixture.

11.Microphone - This microphone receives external low frequencies to trigger the fixture in Sound-Active and Master/Slave modes.

Page 9