Basic operations
The basic operations for this system are as follows.
To turn the system power supply
ON and OFF (standby)
From the remote controls:
Primary remote control | Secondary remote control |
To turn TV power ON and OFF
JVC TVs may be used as is with the primary and secondary remote controls. TVs from other manufacturers require changes to the transmittable signals before they can be used with the primary and secondary remote controls. See page 57 for details of changing the transmittable signals.
From the remote controls: |
|
Primary remote control | Secondary remote control |
AUDIO | AUDIO |
Press 
AUDIO to turn power ON.
The STANDBY lamp goes off, and the current source name (or station frequency) appears on the display window.
The center unit 
button and 0button will light up blue.
Press 
AUDIO again to turn power OFF (standby).
The STANDBY lamp is lit.
On the front panel:
STANDBY lamp
TV | TV |
Press 
TV to turn power ON.
Press 
TV again to turn power OFF.
Adjusting volume
The volume level can be adjusted within the range of “0” (minimum) to “80” (maximum).
From the remote controls: |
|
Primary remote control | Secondary remote control |
Press 
to turn power ON.
The STANDBY lamp goes off, and the current source name (or station frequency) appears on the display window.
The center unit 
button and 0button will light up blue.
Press 
again to turn power OFF (standby).
The STANDBY lamp is lit.
Notes:
•The powered
•A small amount of power is consumed in the standby mode. Remove both AC power cords from the AC outlets to turn the center unit and powered
VOLUME + /– | VOLUME + /– |
On the front panel:
VOLUME + /–
Press VOLUME + or –.
Press VOLUME + to increase volume.
Press VOLUME – to decrease volume.
CAUTION:
Always set the volume to the minimum before starting any source. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.
16
