Connections

Connecting the FM and AM (MW)

antennas

FM antenna connections ———————————

To connect the powered sub-woofer

Use the supplied system cable to connect the powered sub-woofer (SP-PWA10).

Center unit (XV-THA10R)

 

 

Ensure that the

 

 

£ mark on

 

 

the plug faces

 

 

upwards.

 

System

 

A. Using the supplied FM antenna

cable

 

(supplied)

 

The FM antenna provided can be connected to the FM 75 Ω

 

 

 

COAXIAL terminal as temporary measure.

Ensure that the £

 

B. Using the standard type connector (Not supplied)

mark on the plug

 

faces to the right.

 

A standard type connector should be connected to the FM 75 Ω

 

CAUTION:

Powered sub woofer (SP-PWA10)

COAXIAL terminal.

 

• Use the system cable provided for attaching the center unit and

Note:

the sub woofer.

 

• If reception is poor, connect the outdoor antenna.

Connecting the TV

Before attaching the 75 Ω coaxial cable (the kind with a round

wire going to an outdoor antenna), disconnect the supplied FM

 

 

antenna.

Connect the TV to view video images from the center unit.

 

AM (MW) antenna connections —————————

 

S-video cable (not supplied)

 

Connect to the TV if it has an S-video input (for

Turn the loop until you have the best reception.

 

higher image quality). Connect the cables with

 

the £mark facing down.

Center unit (XV-THA10R)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To S-video

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

input

Notes:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• If the AM

(MW) loop antenna wire is covered with

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

vinyl, remove the vinyl by twisting it as shown

 

 

 

 

 

 

 

 

 

 

 

 

 

in the diagram.

 

 

 

 

 

 

 

 

 

To composite

Video cable

 

 

 

 

• Make sure the antenna conductors do not touch any other

 

 

 

 

video input

 

 

 

 

 

 

 

 

 

(supplied)

 

 

 

terminals, connecting cords and power cord. This could cause

 

 

 

 

 

Notes:

 

 

 

 

 

 

 

 

 

 

 

 

poor reception.

 

 

 

 

 

 

 

 

 

 

 

 

• If reception is poor, connect an outdoor single vinyl-covered wire

• When connecting the TV to the TV SOUND/DBS jacks, DO NOT

to the AM EXT terminal. (Keep the AM (MW) loop antenna

connect the TV’S-video output to these video input terminals.

connected.)

• Do not connect the unit to an NTSC television. Connect it to a

 

 

 

PAL television.

 

 

 

 

6

Page 10
Image 10
JVC TH-A10R manual Connections, Connecting the FM and AM MW Antennas, To connect the powered sub-woofer, Connecting the TV