Menu Mode On-Screen Controls, English | Telex P350 specification

Menu Mode On-Screen Controls

☞NOTE: To maximize the image quality of NTSC, PAL or SECAM video, the On-Screen controls are displayed in a low resolution mode. When video input is displayed, the On-Screen controls will not appear as sharp as when a computer input is displayed.

SYNC

WIDTH

ENGLISH

SYNC	To access the menu page with the SYNC function, press and release
	MENU, page-up or page-down, then press either the up or down arrow
	key to “step” to the line where SYNC is displayed. Press either the right
	or left arrow key to select between 16 possible image phase adjustment
	settings. An on-screen graphic will indicate the SYNC setting. SYNC
	can be affected by the WIDTH control, refer to the Troubleshooting
	Guide.
WIDTH	To access the menu page with the WIDTH function, press and release
	MENU, page-up or page-down, then press either the up or down arrow
	key to “step” to the line where WIDTH is displayed. Press the right arrow
	key to expand the width of the image. Press the left arrow key to
	contract the width of the image. An on-screen graphic will indicate the
	relative value of the WIDTH setting. WIDTH may affect the SYNC
	control, refer to the Troubleshooting Guide.
Language	To access the menu page with the language function, press and release
	MENU, page-up or page-down, then press either the up or down arrow
	key to “step” to the line where ENGLISH, FRANCAIS, DEUTSCH or
	ESPAÑOL is displayed. Press either the right or left arrow key to “step”
	through the four languages. The language selected will be displayed
	on-screen.

User Manual 17