Telex P350 user manual 00009.7, 00019

LAMP HOURS	00009.7
LAMP CYCLES	00019

LAMP HOURS	To access the menu page with the LAMP HOURS function, press
	page-down five times or page-up two times, then press either the up or
	down arrow key to “step” to the line where LAMP HOURS is displayed.
	An on-screen graphic will indicate the accumulated LAMP HOURS
	value. As the P350 is used, the lamp hour value is incremented. The
	average life expectancy of the metal halide lamp is 2,000 hours. When a
	new lamp is installed, press either the right or left arrow key to reset the
	LAMP HOURS value to zero.
LAMP CYCLES	To access the menu page with the LAMP CYCLES function, press
	page-down five times or page-up two times, then press either the up or
	down arrow key to “step” to the line where LAMP CYCLES is displayed.
	An on-screen graphic will indicate the accumulated LAMP CYCLES
	value. Every time the P350 lamp is turned on, the lamp cycle value is
	incremented. When a new lamp is installed, press either the right or left
	arrow key to reset the LAMP CYCLES value to zero.

TV COLOR

TV SHARPNESS

TV

TV COLOR

TV SHARPNESS

ENGLISH

To access the menu page with the TV COLOR function, press and release MENU, page-up or page-down, then press either the up or down arrow key to “step” to the line where TV COLOR is displayed. Press the right arrow key to increase the amount of color in the image. Press the left arrow key to decrease the amount of color in the image. An on-screen graphic will indicate the relative value of the TV COLOR setting. This control can only be adjusted when viewing a TV video image.

To access the menu page with the TV SHARPNESS function, press and release MENU55, page-up or page-down, then press either the up or down arrow key to “step” to the line where TV SHARPNESS is displayed. Press the right or left arrow key to select between the eight image sharpness settings. An on-screen graphic will indicate the TV SHARPNESS setting. This control can only be adjusted when viewing a TV video image.

20 User Manual