| Troubleshooting Guide |
PROBLEM | POSSIBLE SOLUTIONS |
Telex logo is displayed on Firefly™ P350
∙Unit is working properly, but no video source is present. No image projected from Firefly™ P350
∙Firefly™ not turned on.
∙Firefly™ not connected to AC wall outlet.
∙AC wall outlet defective.
∙Computer or video cable not secure.
∙No video signal from computer or video source.
∙Incompatible video signal from computer.
∙Projector lamp burned out.
∙Weak video signal or poor VCR tracking.
No image on computer monitor
∙Computer or monitor video cable not secure.
∙Monitor power off or disconnected.
∙Firefly™ not connected to AC wall outlet.
∙No video signal from computer.
Poor color or no color
∙Adjust brightness, tint, and contrast controls.
∙Wrong inverse mode; change INVERSE setting.
∙Signal from computer is monochrome.
∙Computer video cable not secure.
∙Select a different color mode using the PALETTE function.
∙Adjust room lighting.
Flickering or unstable image
∙Focus needed; use the SYNC control (there are 16 possible settings).
∙Computer video cable not secure.
∙Incompatible video signal from computer.
∙Adjust the WIDTH control.
User Manual 25