Telex P350 user manual Illuminated Indicators, Remote Control

	Illuminated Indicators
POWER	The POWER button glows red when the P350 is plugged into an AC
	wall outlet and is ready to be turned on; one of the cooling fans should
	be running at this time.
Keypanel	When the keypanel is lit, indicates that the P350 is in operation; the
	projector lamp should also be on.

Remote Control

The RC-10 remote control can be used to remotely change all of the keypanel and on-screen control functions. When a remote control button is pressed, the LED on the remote control blinks rapidly.

☞NOTE: When the remote control operating distance becomes too short for your purposes, install a fresh battery as described in the Remote Control Battery section of this manual.

To use the remote control, point it at the front of the projector and press a key, or “bounce” the IR signal off the viewing screen.

User Manual 21