Telex P350 user manual Fuse Replacement, Fuseholder Location

☞NOTE: Typically, metal halide lamps have an average operating life of approximately 2,000 hours. When the On-Screen LAMP HOURS shows 2,000 hours of operation, lamp failure may occur soon. You may elect to replace the lamp, or continue using your P350 until the lamp actually fails.

5.Loosen the two lamp compartment screws shown in Figure 14. (These are captive screws and should not be completely removed.)

6.Lift out the lamp compartment assembly.

7.Install a new lamp compartment assembly.

8.Tighten the two lamp compartment screws shown in Figure 14.

Fuse Replacement

Figure 15 shows the location of the fuse holder. Use a small flat-blade screwdriver to pop the fuse holder out.

☞NOTE: To access the fuseholder, the Firefly™ P350 must be in its raised position with the power cord unplugged.

Replace the fuses only with the type and rating shown on the label. If the module repeatedly blows fuses, return it for servicing.

Figure 15. Fuseholder Location

FUSE

HOLDER

250V de fusible un

avec uniquement Employer

fuse 250V a with only Use

AC POWER

INPUT JACK

24 User Manual