Onkyo TX-SR506 Supplied Accessories, Precautions, Make sure you have the following accessories

Page 4

Precautions—Continued

For British models

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured mark- ings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must be approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse. If the power cord’s plug is not suitable for your socket outlets, cut it off and fit a suitable plug. Fit a suitable fuse in the plug.

For European Models

Declaration of Conformity

We, ONKYO EUROPE ELECTRONICS GmbH

LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3.

GROEBENZELL, GERMANY

K. MIYAGI

ONKYO EUROPE ELECTRONICS GmbH

Supplied Accessories

Make sure you have the following accessories:

Remote controller and two batteries (AA/R6)

Speaker setup microphone

Indoor FM antenna

AM loop antenna

Front

Left

Front

Left

SP-B /Zone2

Left

SP-B /Zone2

Left

Front

Right

Front

Right

SP-B /Zone2

Right

SP-B /Zone2

Right

Surround

Left

Surround

Left

Surround

Right

Surround

Right

Center

Center

SurroundBack

Left

SurroundBack

Left

Zone2

Left

Zone2

Left

SurroundBack

Right

SurroundBack

Right

Zone2

Right

Zone2

Right

Front

Left

Front

Left

SP-B / Zone 2

Left

SP-B / Zone 2

Left

Front

Right

Front

Right

SP-B / Zone 2

Right

SP-B / Zone 2

Right

Surround

Left

Surround

Left

Surround

Right

Surround

Right

Center

Center

Surround Back

Left

Surround Back

Left

Zone 2

Left

Zone 2

Left

Surround Back

Right

Surround Back

Right

Zone 2

Right

Zone 2

Right

1

2

3

Speaker Cable

Speaker cable labels

*

Power-plug adapter

Only supplied in certain countries. Use this adapter if your AC outlet does not match with the plug on the AV receiver’s power cord. (Adapter varies from country to country.)

*How to mount the AC plug:

*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operation are the same regardless of color.

4

Image 4
Contents TX-SR506 TX-SR576 Important Safety Instructions AvisPrecautions PowerHandling Notes FCC Information for UserSupplied Accessories PrecautionsMake sure you have the following accessories How to mount the AC plugContents Features AmplifierProcessing ConnectionsMain Room Multiroom CapabilityZone 2 Room Getting to Know the AV Receiver Front PanelGetting to Know the AV Receiver DisplayRear Panel Zone 2 Line OUT L/R Remote Controller Controlling the AV ReceiverInstalling the Batteries Remote ControllerUsing the Remote Controller Connecting Your Speakers Enjoying Home TheaterSubwoofer Surround back left and right speakersConnecting Your Speakers Connecting a Powered SubwooferUsing Dipole Speakers Speaker ConfigurationSpeaker Connection Precautions Connecting the Speaker CablesRead the following before connecting your speakers Strip about 5/8Bi-amping Front Speakers Bi-amping Speaker HookupConnecting Antennas Connecting the AM Loop AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shown American ModelConnecting Antennas Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Audio and Video Signals to the AV ReceiverWhich Connections Should I Use? Video Connection FormatsConnecting a TV or Projector Video ConnectionAudio Connection HintMultichannel analog audio output, see Connecting a DVD playerDVD player Hooking Up the Multichannel Input Connecting a VCR or DVR for Playback VCR or DVRConnecting a VCR or DVR for Recording Make the audio connection aCBL/SAT in S Connecting Components with Hdmi Making Hdmi ConnectionsAbout Hdmi Supported Audio FormatsAudio Signals For TX-SR506For TX-SR576 TipConnecting a Camcorder, Game Console, or Other Device Make the video connection a Make the audio connection aCamcorder, game console, etc Camcorder or consoleStep CD playerCD or turntable Phono preampConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Coaxial CBL/SAT OpticalConnecting an RI Dock Not all iPod models output videoIf Your iPod Supports Video If Your iPod Doesn’t Support VideoConnecting Onkyo Components Connecting the Power CordSome components may not support all ComponentsDo the automatic speaker setup-this is essential Turning On the AV ReceiverTurning On and Standby Up and Running in a Few Easy StepsFirst Time Setup Automatic Speaker Setup Audyssey 2EQUsing Audyssey 2EQ Measurement PositionsFirst Time Setup Error MessagesSpeaker Settings To Retry the Automatic Speaker SetupChanging the Speaker Settings Manually Using a Powered SubwooferHdmi Input Setup Buttons to select 2. SpeakerButtons to select 1-1.HDMI, Component Video Input Setup Setup closesButtons to select 1.Input IN1 Select if the video component is connected to CompoDigital Input Setup Changing the Input Display Buttons to select 1-3.DigitalFor the input selector whose set Automatic Audio Input Selection Setup TX-SR576 onlyTing you want to change Select a listening mode and enjoy Playing Your AV ComponentsBasic AV Receiver Operation Start playback on the source componentSetting the Display Brightness Using the Sleep TimerCommon Functions Muting the AV Receiver7Using Headphones Signal format*2 Or samplingCommon Functions Displaying Source InformationSpecifying the Digital Signal Format Press and hold the AV receiver’sDigital Input button for about SecondsAM Frequency Step Setup on some models Listening to the RadioTo change the frequency step on the TX-SR576 To change the frequency step on the TX-SR506Listening to the Radio Tuning into AM/FM Radio StationsListening to AM/FM Stations Tuning into Stations by Frequency Displaying AM/FM Radio InformationActual display depends on country For example, to tune to 87.5 FM, press 8, 7Selecting Presets Deleting PresetsUsing RDS European models only What is RDS?RDS Program Types PTY This allows you to search RDS radio stations by type seeListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Using the Listening Modes Selecting with the Remote ControllerSelecting the Listening Modes Selecting on the AV ReceiverListening Modes Available for Each Source Format Using the Listening ModesAnalog and PCM Sources Dolby Digital and Dolby Digital Plus Sources DTS Sources Pure AudioAbout the Listening Modes Use this mode with any stereo movie e.g., TV, DVD, VHS Onkyo Original DSP ModesRecording the Input Source RecordingRecording from Different AV Sources Adjusting the Listening Modes Using the Audio Adjust SettingsAdjusting the Listening Modes Multiplex/Mono SettingsPLIIx/Neo6 Settings Dolby Digital SettingsUsing the Audio Settings Theater-Dimensional SettingMultichannel Subwoofer Setting Tone Control SettingsCinemaFILTER Audyssey Dynamic EQMusic Optimizer Speaker LevelsListening Mode Presets TX-SR576 only Advanced Setup Speaker SetupSetup, and then press Buttons to select 2.SpeakerAdvanced Setup Crossover FrequencyUse the Down button to Left and Right / but- tons to select 2ch or 1chDouble Bass Speaker DistanceTurn up the volume so that you Can hear the test tone suffiCiently Repeat so that the levelEqualizer Settings Volume at each frequency can beSetup menu closes Press the Down button,Source Setup TX-SR576 only IntelliVolumeMiscellaneous Setup TX-SR576 only Volume SetupRemote Ctrl Hardware Setup TX-SR576 onlyZone Tuner AnalogMultiButtons to select 8.Lock Setup Lock Setup TX-SR576 onlyThen press Enter Use the Left and Right Buttons to select Connecting Zone Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting Your Zone 2 Speakers to an Amp in Zone ZonePowered Zone 2 Setting3 TX-SR576 only Buttons to select 7-2.Zone2Controlling Zone 2 with the Remote Controller Using ZoneControlling Zone 2 from the AV receiver Adjusting the Volume of Zones Muting ZonesEntering Remote Control Codes Preprogrammed Remote Control CodesControlling Other Components Resetting the Remote Controller Remote Control Codes for Onkyo Components Connected viaResetting the Remote Mode Buttons Controlling Other ComponentsControlling a DVD Player, or DVD Recorder Controlling a VCR or PVR Controlling a Satellite Receiver or Cable Receiver Controlling a CD Player, CD Recorder, or MD Player Disc +/- buttonControlling an RI Dock Controlling a Cassette Recorder Controlling a TV ON/STANDBY, TV buttonsTroubleshooting Troubleshooting Remote controller doesn’t work Sound changes when I connect my head- phonesThere’s no picture from a source connected to an Hdmi Can’t control other componentsVideo Attenuation Video ATT0 defaultVideo ATT2 Gain is reduced by 2 dB Specifications Amplifier SectionVideo Section Tuner SectionSpecifications Onkyo Europe Electronics GmbH MemoOnkyo Europe UK Office