Onkyo TX-SR506, TX-SR576 Turn up the volume so that you, Can hear the test tone suffi, Ciently

Page 70

Advanced Setup—Continued

8

Press the [SETUP] button.

 

 

Setup closes.

 

 

Notes:

The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).

The Surround and Surround Back distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R, and Surr Back L distances can be set between 5 and 25 ft. (1.5 and 7.5 m).

The speaker distance cannot be adjusted while a pair of headphones is connected or the multichannel DVD input is being used.

Speaker Levels

These settings are set automatically by the Automatic Speaker Setup function (see page 36).

You can set the volume level of each speaker so that all speakers can be heard equally at the listening position.

1

Press the [RECEIVER] REMOTE

 

 

MODE button, followed by the

 

[SETUP] button.

 

If you have a TX-SR506, proceed to

 

step 3.

2

(TX-SR576 only)

 

 

Use the Up and Down [ ]/[ ]

 

buttons to select “2.Speaker

 

Setup,” and then press the

 

[ENTER] button.

3 Use the Up and Down []/[ ] buttons to select “Level Cal,” and then press [ENTER].

A pink noise test tone is output by the front left speaker.

4

Turn up the volume so that you

 

 

can hear the test tone suffi-

 

ciently.

 

 

As each speaker outputs the test tone,

 

its name appears on the display.

 

 

 

5

Use the Left and Right [

]/[ ]

 

buttons to adjust the speaker

 

level, and use the Down [

] but-

 

ton to select the next speaker.

The levels can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

6

Repeat step 5 so that the level of

 

 

the test tone coming from each

 

speaker is the same.

 

Speakers that you set to No or None in

 

the Speaker Configuration (page 67) do

 

not output the test tone.

 

 

7

Press the [SETUP] button.

 

 

Setup closes.

 

Don’t forget to turn down the volume if

 

you turned it up while setting the levels.

 

 

Note:

The speaker levels cannot be adjusted while a pair of headphones is connected or the AV receiver is muted.

70

Image 70
Contents TX-SR506 TX-SR576 Important Safety Instructions AvisHandling Notes PrecautionsPower FCC Information for UserMake sure you have the following accessories Supplied AccessoriesPrecautions How to mount the AC plugContents Processing FeaturesAmplifier ConnectionsMain Room Multiroom CapabilityZone 2 Room Getting to Know the AV Receiver Front PanelGetting to Know the AV Receiver DisplayRear Panel Zone 2 Line OUT L/R Remote Controller Controlling the AV ReceiverInstalling the Batteries Remote ControllerUsing the Remote Controller Subwoofer Connecting Your SpeakersEnjoying Home Theater Surround back left and right speakersUsing Dipole Speakers Connecting Your SpeakersConnecting a Powered Subwoofer Speaker ConfigurationRead the following before connecting your speakers Speaker Connection PrecautionsConnecting the Speaker Cables Strip about 5/8Bi-amping Front Speakers Bi-amping Speaker HookupConnecting the Indoor FM Antenna Connecting AntennasConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor AM Antenna Connecting AntennasConnecting an Outdoor FM Antenna Using a TV/FM Antenna SplitterOptical Digital Jacks Connecting Your ComponentsAbout AV Connections AV Connection Color CodingWhich Connections Should I Use? Connecting Your ComponentsConnecting Audio and Video Signals to the AV Receiver Video Connection FormatsAudio Connection Connecting a TV or ProjectorVideo Connection HintMultichannel analog audio output, see Connecting a DVD playerDVD player Hooking Up the Multichannel Input Connecting a VCR or DVR for Playback VCR or DVRConnecting a VCR or DVR for Recording Make the audio connection aCBL/SAT in S About Hdmi Connecting Components with HdmiMaking Hdmi Connections Supported Audio FormatsFor TX-SR576 Audio SignalsFor TX-SR506 TipCamcorder, game console, etc Connecting a Camcorder, Game Console, or Other DeviceMake the video connection a Make the audio connection a Camcorder or consoleCD or turntable StepCD player Phono preampConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Coaxial CBL/SAT OpticalIf Your iPod Supports Video Connecting an RI DockNot all iPod models output video If Your iPod Doesn’t Support VideoSome components may not support all Connecting Onkyo ComponentsConnecting the Power Cord ComponentsTurning On and Standby Do the automatic speaker setup-this is essentialTurning On the AV Receiver Up and Running in a Few Easy StepsUsing Audyssey 2EQ First Time SetupAutomatic Speaker Setup Audyssey 2EQ Measurement PositionsFirst Time Setup Error MessagesChanging the Speaker Settings Manually Speaker SettingsTo Retry the Automatic Speaker Setup Using a Powered SubwooferHdmi Input Setup Buttons to select 2. SpeakerButtons to select 1-1.HDMI, Buttons to select 1.Input Component Video Input SetupSetup closes IN1 Select if the video component is connected to CompoDigital Input Setup Changing the Input Display Buttons to select 1-3.DigitalFor the input selector whose set Automatic Audio Input Selection Setup TX-SR576 onlyTing you want to change Basic AV Receiver Operation Select a listening mode and enjoyPlaying Your AV Components Start playback on the source componentCommon Functions Setting the Display BrightnessUsing the Sleep Timer Muting the AV ReceiverCommon Functions 7Using HeadphonesSignal format*2 Or sampling Displaying Source InformationDigital Input button for about Specifying the Digital Signal FormatPress and hold the AV receiver’s SecondsTo change the frequency step on the TX-SR576 AM Frequency Step Setup on some modelsListening to the Radio To change the frequency step on the TX-SR506Listening to the Radio Tuning into AM/FM Radio StationsListening to AM/FM Stations Actual display depends on country Tuning into Stations by FrequencyDisplaying AM/FM Radio Information For example, to tune to 87.5 FM, press 8, 7Selecting Presets Deleting PresetsRDS Program Types PTY Using RDS European models onlyWhat is RDS? This allows you to search RDS radio stations by type seeListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Selecting the Listening Modes Using the Listening ModesSelecting with the Remote Controller Selecting on the AV ReceiverListening Modes Available for Each Source Format Using the Listening ModesAnalog and PCM Sources Dolby Digital and Dolby Digital Plus Sources DTS Sources Pure AudioAbout the Listening Modes Use this mode with any stereo movie e.g., TV, DVD, VHS Onkyo Original DSP ModesRecording the Input Source RecordingRecording from Different AV Sources Adjusting the Listening Modes Using the Audio Adjust SettingsPLIIx/Neo6 Settings Adjusting the Listening ModesMultiplex/Mono Settings Dolby Digital SettingsMultichannel Subwoofer Setting Using the Audio SettingsTheater-Dimensional Setting Tone Control SettingsMusic Optimizer CinemaFILTERAudyssey Dynamic EQ Speaker LevelsListening Mode Presets TX-SR576 only Setup, and then press Advanced SetupSpeaker Setup Buttons to select 2.SpeakerUse the Down button to Advanced SetupCrossover Frequency Left and Right / but- tons to select 2ch or 1chDouble Bass Speaker DistanceCiently Turn up the volume so that youCan hear the test tone suffi Repeat so that the levelSetup menu closes Equalizer SettingsVolume at each frequency can be Press the Down button,Source Setup TX-SR576 only IntelliVolumeMiscellaneous Setup TX-SR576 only Volume SetupRemote Ctrl Hardware Setup TX-SR576 onlyZone Tuner AnalogMultiButtons to select 8.Lock Setup Lock Setup TX-SR576 onlyThen press Enter Use the Left and Right Buttons to select Connecting Your Zone 2 Speakers to an Amp in Zone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver ZonePowered Zone 2 Setting3 TX-SR576 only Buttons to select 7-2.Zone2Controlling Zone 2 with the Remote Controller Using ZoneControlling Zone 2 from the AV receiver Adjusting the Volume of Zones Muting ZonesEntering Remote Control Codes Preprogrammed Remote Control CodesControlling Other Components Resetting the Remote Mode Buttons Resetting the Remote ControllerRemote Control Codes for Onkyo Components Connected via Controlling Other ComponentsControlling a DVD Player, or DVD Recorder Controlling a VCR or PVR Controlling a Satellite Receiver or Cable Receiver Controlling a CD Player, CD Recorder, or MD Player Disc +/- buttonControlling an RI Dock Controlling a Cassette Recorder Controlling a TV ON/STANDBY, TV buttonsTroubleshooting Troubleshooting There’s no picture from a source connected to an Hdmi Remote controller doesn’t workSound changes when I connect my head- phones Can’t control other componentsVideo Attenuation Video ATT0 defaultVideo ATT2 Gain is reduced by 2 dB Video Section SpecificationsAmplifier Section Tuner SectionSpecifications Onkyo Europe Electronics GmbH MemoOnkyo Europe UK Office