Onkyo TX-DS696 Speaker Config sub-menu, Speaker Distance sub-menu, Level Calibration sub-menu

Page 37

Setup menus

1-1. Speaker Config sub-menu

Here you will enter which speakers are connected and the size of each speaker.

a. Subwoofer

Yes: Select when a subwoofer is connected.

No: Select when a subwoofer is not connected.

b. Front

Large: Select if the front speakers are large sized.

Small: Select if the front speakers are small sized.

•If “No” is selected for the Subwoofer setting, then this setting is fixed to “Large.”

c.Center

None: Select if no center speaker is connected.

Large: Select if the center speaker is large sized.

Small: Select if the center speaker is small sized.

•If “Small” is selected for the Front setting, then “Large” cannot be selected for this setting.

d.Surround

None: Select if no surround left and right speakers are connected.

Large: Select if the surround left and right speakers are large sized.

Small: Select if the surround left and right speakers are small sized.

•If “Small” is selected for the Front setting, then “Large” cannot be selected for this setting.

1-2. Speaker Distance sub-menu

Here you will enter the distance from each speaker to your normal listening position. This is important for the timing of the acoustics to create the proper sound space that the TX-DS696 and today’s sound systems are able to produce.

Note:

Speakers that you selected “No” or “None” for in the Speaker Config sub-menu will not appear.

a. Unit

feet: Select if you will enter the distances in feet.

meters: Select if you will enter the distances in meters.

b. Front L/R

Set the distance from the front left and right speakers to your normal listening position between 1 and 30 feet in 1-feet intervals (0.3 to 9 meters in 0.3-meter intervals).

Position the front left and right speakers so that they are the same distance from the listener. If they are not, you may lose the center position for stereo sound.

c. Center

Set the distance from the center speaker to your normal listening position between 1 and 30 feet in 1-feet intervals (0.3 to 9 meters in 0.3-meter intervals).

d. Surround L/R

Set the distance from the surround left and right speakers to your normal listening position between 1 and 30 feet in 1-feet intervals (0.3 to 9 meters in 0.3-meter intervals).

1-3. Level Calibration sub-menu

Here you will set the volume for each speaker so that they are all heard by the listener at the same level. This is especially important for speaker layouts where the left and right speakers are at different distances or in asymmetrical positions due to room designs and configurations. These settings and the distance settings performed above are vital to create the proper acoustics required for the optimum sound space and dynamics.

Note:

The speaker level settings here are not effective for multi-channel input sources. To adjust the speaker levels for multi-channel input sources, you will need to use the CH SEL, LEVEL , and LEVEL buttons on the RC-440M remote controller. See pages 30, 31.

Calibrating the speaker levels

(1)When this sub-menu is entered, the TX-DS696 will emit a pink noise from the front left speaker. At this time, the Master volume automatically increases to the reference level (0dB). Remember the level of this noise and then press the cursor button. (Note that this can be adjusted to any level between –12 and 12 decibels in 1-decibel intervals.) The TX-DS696 will now emit the pink noise from the center speaker.

(2)Using the and cursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker. You can jog back and forth between the speakers to help you compare the volume levels.

(3)Press the cursor button again. The TX-DS696 will now emit the pink noise from the front right speaker.

(4)Repeat steps (2) and (3) above for the front right and other speakers until all speakers are adjusted to the same volume level.

Note:

•Speakers that you selected “No” or “None” for in the Speaker Config sub-menu will not appear.

a.Left

Sound comes from the front left speaker. Adjust the sound level between –12 and 12 decibels in 1-decibel intervals.

b. Center

Sound comes from the center speaker. Adjust the sound level between –12 and 12 decibels in 1-decibel intervals.

c. Right

Sound comes from the front right speaker. Adjust the sound level between –12 and 12 decibels in 1-decibel intervals.

d. Surr Right

Sound comes from the surround right speaker. Adjust the sound level between –12 and 12 decibels in 1-decibel intervals.

e. Surr Left

Sound comes from the surround left speaker. Adjust the sound level between –12 and 12 decibels in 1-decibel intervals.

f. Subwoofer

Sound comes from the subwoofer. Adjust the sound level between

–12 and 12 decibels in 1-decibel intervals.

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents TX-DS696 Avis Important SafeguardsPrecautions Contents Contents Supplied accessories FeaturesSetting the Voltage selector Worldwide models only Before using this unitUsing the remote controller Installing the remote controller batteriesFront panel Front panel facilitiesFront panel display Front panel facilities Remote controller Remote controller Connections Connecting power amplifiers Voltage selectorImproper connection Inserted completely Optical digital input terminalConnecting a turntable Phono Connecting your audio componentsConnecting a compact disc player CD ConnectionsFlow of the video signals is as follows Connecting your video componentsConnecting a DVD player DVD Audio connection cable Left White Video connection cableConnecting a satellite tuner or television Video Connecting a video cassette recorder VideoConnecting a television monitor or projector Connecting settop box or video camera, etc. VideoPower on/ready function Connecting power amplifiersPower off function Connect to devices with z terminalsPositioning speakers Connecting speakers Connecting speakersStandard speaker placement Check the impedance of the speakers you are connectingConnecting the speaker cable Connecting a subwoofer Connecting speakersConnecting the remote zone speakers 345Connecting the power Connecting the AM antenna cable Connecting antennasConnecting the included antennas Assembling the AM loop antennaConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageSpeaker Configuration submenu Speaker setupPress the Setup button Buttons to be usedSpeaker Distance submenu Speaker setupTurn the jog dial to adjust About the other settingsLevel Calibration submenu Press the jog dial againListening to a stereo radio station FM mode Tuning into a radio stationListening to Radio Broadcasts Selecting a preset radio station Presetting a radio stationErasing a preset radio station Listening to Radio BroadcastsListening to RDS broadcasts European models only What is RDS?Listening to RDS broadcasts PTY program types in EuropeDisplaying Radio Text RT Listening to RDS broadcastsPerforming a TP scan Performing a PTY scanListening with headphones Adjusting the bass and trebleEnjoying music or videos with the TX-DS696 Temporarily turning off the soundAdjusting the brightness of the front display Switching the displayUsing the sleep time remote controller only Enjoying music or videos with the TX-DS696Using the tone control Changing the audio modeAdjust the tone using the Bass and Treble dials Enjoying the multichannel outputListening modes Using listening modeChanging the listening mode Using listening modeUsing Cinema Re-Equalization Listening Mode Buttons Re-EQMain menu Setup menusMenu Sub menuNavigating through the Setup menu Setup menusSetting procedures and button operations Tip Speaker Setup menuSpeaker Distance sub-menu Speaker Config sub-menuLevel Calibration sub-menu Calibrating the speaker levelsInput Input Setup menuSource Video Setup sub-menu Audio Setup sub-menuDigital Input MultichannelInput source signals Listening Mode Preset sub-menu IntelliVolume sub-menuIntelliVolume Analog/PCM SourceDescription listening mode parameters Listening Mode Setup menuRelationship between listening mode and parameter Front EffectHeadphones Level sub-menu Volume Setup sub-menuLate Night Setup sub-menu AM Freq Step Setup sub-menu Worldwide model onlyOSD Setup sub-menu OSD Setup menuOSD Config sub-menu OSD Position sub-menuRecording the input source REC OUT selector RecordingRecording both the audio and video Recording a source different from that you are listening toEnjoying music in the remote zone Calling up a preset radio station Using remote controllerOverview Controlling an Onkyo cassette tape deckPress the CD Mode button Using remote controllerDisc Stdby CD Mode Controlling an Onkyo CD playerReturn DVD Mode Press the DVD Mode buttonControlling an Onkyo DVD player Disc VOL TOP Menu Audio Muting Angle Subtitle DVDPress the MD Mode button SAT, CABLE, VCR, and TV Mode buttonsControlling an Onkyo MD recorder To 9, 0, --/--- Numeric keysLearning a pre-programming code SEND/LEARN indicator Buttons thatLearning a pre-programming code Within 30 seconds, enter the 3-digit code numberPre-programmong codes Learning a pre-programming codeDVD Mode DVD Player Mode Operating your programmed remote controllerSAT Mode Satellite Tuner Mode Cable Mode Cable Tuner ModeVCR Mode VCR Mode Operating your programmed remote controllerTV Mode TV Mode Press the VCR Mode buttonMode Direct Mode Macro Programming procedureSEND/LEARN LightPage Erasing all the commands programmed under a Mode button Erasing the programmed command from one buttonPress and release the same Mode button again SEND/LEARN indicator Mode buttonsWhat is a Macro function? Using a Macro functionPress the Mode Macro button to complete the programming Programming a Macro functionProgramming the Direct Macro function Using a Macro functionRunning a Direct Macro function Press the Mode Macro button again Erasing a macro from the Mode Macro buttonDirect Macro Mode buttons Erasing a direct macro from the Direct Macro buttonMacro mode programming memo Erasing all commands and macros that have been programmedPress the Enter button OperationAmplifier Section SpecificationsTroubleshooting guide Video and Audio Troubleshooting guideIf one of the messages shown below appears Onkyo Europe Electronics GmbH Onkyo U.S.A. CorporationOnkyo China Limited

TX-DS696 specifications

The Onkyo TX-DS696 is a powerful and versatile home theater receiver that has left a significant mark in the world of audio and video entertainment. Launched to cater to audiophiles and home cinema enthusiasts, this receiver is known for its robust performance, extensive connectivity options, and user-friendly features, making it a popular choice among consumers.

At the heart of the TX-DS696 is its impressive multichannel processing capabilities. Supporting Dolby Digital and DTS surround sound formats, it delivers immersive audio experiences that enhance the enjoyment of movies, music, and games. The 5.1 channel configuration allows for exceptional sound staging, giving users a truly cinematic experience right in their living rooms.

One of the standout features of the TX-DS696 is its advanced room calibration technology. The receiver analyzes the acoustic characteristics of the room and adjusts the speaker settings accordingly, optimizing sound quality for any space. This ensures that listeners can enjoy a balanced audio performance regardless of their room’s layout or size.

Connection options are plentiful, with multiple audio and video inputs that facilitate direct connections to various devices. The receiver includes several composite and S-Video inputs, along with digital optical and coaxial inputs, allowing users to connect DVD players, gaming consoles, and other multimedia devices easily. The support for component video ensures high-quality image transfer, making it an excellent choice for those who want to enjoy high-definition video.

In terms of power, the TX-DS696 boasts a robust amplifier section capable of delivering rich and dynamic sound across all channels. The built-in high-current amplification technology ensures that even demanding speakers are driven effortlessly, resulting in clean and distortion-free audio at all volume levels.

The user interface is intuitive, with an easy-to-read LCD display and a well-laid-out remote control that provides convenient access to all the receiver’s functions. Additionally, the Onkyo TX-DS696 is compatible with various external devices, allowing for custom configurations that cater to personal preferences.

Overall, the Onkyo TX-DS696 stands out as an exemplary home theater receiver that combines advanced technology, user-friendly features, and powerful performance. Whether you’re a dedicated home theater enthusiast or a casual listener, this receiver offers a rich audio experience that is hard to match. Its blend of performance, versatility, and value makes it a lasting favorite in the realm of home audio systems.
Top Page Image Contents