Onkyo TX-DS696 Listening Mode Preset sub-menu IntelliVolume sub-menu, Input source signals

Page 40

Setup menus

2-3. Listening Mode Preset sub-menu

2-4. IntelliVolume sub-menu

With the TX-DS696, you can set a different listening mode for each different signal type that comes from each input source and also set the parameters for the listening mode itself. For example, if your DVD player also plays compact discs and the DVD video signal is DTS and the compact disc signal is PCM, then you can set a different listening mode for each.

This is especially convenient if you frequently play the same types of movies or music.

Input source signals

a. Analog/PCM Source

Set a listening mode for the input signal from analog sources and PCM sources.

Note:

For PCM sources recorded at a sampling rate of 96 kHz or greater, only the Stereo or Direct listening modes can be selected. However, the set listening mode is stored in memory.

b. Digital Format

Set a listening mode for the input signal from Dolby Digital and DTS sources.

•The TX-DS696 will automatically switch to the listening mode set for the current input signal. For example, even when using the same DVD player, if a CD is played, the listening mode automatically becomes “Stereo,” and if a DVD is played (Dolby Digital 3/2.1), the listening mode automatically becomes Dolby D.

a. IntelliVolume

When switching input sources, you may find that the output level for different components or input sources connected to the TX-DS696 is different even though the main volume setting is the same. Under normal circumstances, you would then have to change the volume setting each time you change the input source. This IntelliVolume sub-menu allows you to preset a volume level for each input source separately so that when you do switch from one input source to another, the TX-DS696 adjusts the volume accordingly so that the resulting volume stays the same. To set the IntelliVolume, simply select an input source at the front panel, and if that source is quieter than other sources, increase its decibel level with the cursor button, or if it is louder than other sources, decrease its decibel level with the cursor button.

The IntelliVolume can be adjusted between –12 and +12 decibels.

Relationship between input source and listening mode

Input source signal (display)

Analog/PCM Source

Digital Format

 

Type of media

Tape, CD,

DVD,

 

 

 

Record, Tuner

Digital satellite broadcast,

 

 

DVD Video (PCM), LD (PCM)

DTS-CD

 

 

 

 

 

 

 

 

 

Digital satellite broadcast

Dolby Digital 2ch Source

 

DTS,

 

 

 

 

 

All excluding

Listening Mode

 

 

 

Dolby Digital 2ch

Direct

●

 

 

 

Stereo

●

●

 

●

Surround

Pro Logic II (Movie)

●

●

 

 

 

 

 

 

 

 

 

Pro Logic II (Music)

●

●

 

 

 

 

 

 

 

 

 

Dolby Digital

 

 

 

●

 

 

 

 

 

 

 

DTS

 

 

 

●

 

 

 

 

 

 

Orchestra

●

 

 

 

 

 

 

 

 

 

Unplugged

●

 

 

 

Studio-Mix

●

 

 

 

TV Logic

●

 

 

 

 

 

 

 

 

 

All Ch Stereo

●

 

 

 

Notes:

•The listening modes that can be set are different for each input source format.

•You may not be able to select all the listening modes shown here depending on your speaker configuration or the selected input source.

40

Page 39 Page 41
Image 40
Page 39 Page 41
Contents TX-DS696 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesBefore using this unit Setting the Voltage selector Worldwide models onlyUsing the remote controller Installing the remote controller batteriesFront panel Front panel facilitiesFront panel display Front panel facilities Remote controller Remote controller Connecting power amplifiers Voltage selector ConnectionsImproper connection Inserted completely Optical digital input terminalConnecting your audio components Connecting a turntable PhonoConnecting a compact disc player CD ConnectionsConnecting your video components Flow of the video signals is as followsConnecting a DVD player DVD Audio connection cable Left White Video connection cableConnecting a video cassette recorder Video Connecting a satellite tuner or television VideoConnecting a television monitor or projector Connecting settop box or video camera, etc. VideoConnecting power amplifiers Power on/ready functionPower off function Connect to devices with z terminalsConnecting speakers Positioning speakers Connecting speakersStandard speaker placement Check the impedance of the speakers you are connectingConnecting speakers Connecting the speaker cable Connecting a subwooferConnecting the remote zone speakers 345Connecting the power Connecting antennas Connecting the AM antenna cableConnecting the included antennas Assembling the AM loop antennaConnecting antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Directional linkageSpeaker setup Speaker Configuration submenuPress the Setup button Buttons to be usedSpeaker setup Speaker Distance submenuAbout the other settings Turn the jog dial to adjustLevel Calibration submenu Press the jog dial againListening to a stereo radio station FM mode Tuning into a radio stationListening to Radio Broadcasts Presetting a radio station Selecting a preset radio stationErasing a preset radio station Listening to Radio BroadcastsWhat is RDS? Listening to RDS broadcasts European models onlyListening to RDS broadcasts PTY program types in EuropeListening to RDS broadcasts Displaying Radio Text RTPerforming a TP scan Performing a PTY scanAdjusting the bass and treble Listening with headphonesEnjoying music or videos with the TX-DS696 Temporarily turning off the soundSwitching the display Adjusting the brightness of the front displayUsing the sleep time remote controller only Enjoying music or videos with the TX-DS696Changing the audio mode Using the tone controlAdjust the tone using the Bass and Treble dials Enjoying the multichannel outputUsing listening mode Listening modesUsing listening mode Changing the listening modeUsing Cinema Re-Equalization Listening Mode Buttons Re-EQSetup menus Main menuMenu Sub menuNavigating through the Setup menu Setup menusSetting procedures and button operations Speaker Setup menu TipSpeaker Config sub-menu Speaker Distance sub-menuLevel Calibration sub-menu Calibrating the speaker levelsInput Input Setup menuSource Audio Setup sub-menu Video Setup sub-menuDigital Input MultichannelListening Mode Preset sub-menu IntelliVolume sub-menu Input source signalsIntelliVolume Analog/PCM SourceListening Mode Setup menu Description listening mode parametersRelationship between listening mode and parameter Front EffectVolume Setup sub-menu Headphones Level sub-menuLate Night Setup sub-menu AM Freq Step Setup sub-menu Worldwide model onlyOSD Setup menu OSD Setup sub-menuOSD Config sub-menu OSD Position sub-menuRecording Recording the input source REC OUT selectorRecording both the audio and video Recording a source different from that you are listening toEnjoying music in the remote zone Using remote controller Calling up a preset radio stationOverview Controlling an Onkyo cassette tape deckUsing remote controller Press the CD Mode buttonDisc Stdby CD Mode Controlling an Onkyo CD playerPress the DVD Mode button Return DVD ModeControlling an Onkyo DVD player Disc VOL TOP Menu Audio Muting Angle Subtitle DVDSAT, CABLE, VCR, and TV Mode buttons Press the MD Mode buttonControlling an Onkyo MD recorder To 9, 0, --/--- Numeric keysSEND/LEARN indicator Buttons that Learning a pre-programming codeLearning a pre-programming code Within 30 seconds, enter the 3-digit code numberLearning a pre-programming code Pre-programmong codesOperating your programmed remote controller DVD Mode DVD Player ModeSAT Mode Satellite Tuner Mode Cable Mode Cable Tuner ModeOperating your programmed remote controller VCR Mode VCR ModeTV Mode TV Mode Press the VCR Mode buttonProgramming procedure Mode Direct Mode MacroSEND/LEARN LightPage Erasing the programmed command from one button Erasing all the commands programmed under a Mode buttonPress and release the same Mode button again SEND/LEARN indicator Mode buttonsUsing a Macro function What is a Macro function?Press the Mode Macro button to complete the programming Programming a Macro functionProgramming the Direct Macro function Using a Macro functionRunning a Direct Macro function Erasing a macro from the Mode Macro button Press the Mode Macro button againDirect Macro Mode buttons Erasing a direct macro from the Direct Macro buttonErasing all commands and macros that have been programmed Macro mode programming memoPress the Enter button OperationSpecifications Amplifier SectionTroubleshooting guide Video and Audio Troubleshooting guideIf one of the messages shown below appears Onkyo Europe Electronics GmbH Onkyo U.S.A. CorporationOnkyo China Limited

TX-DS696 specifications

The Onkyo TX-DS696 is a powerful and versatile home theater receiver that has left a significant mark in the world of audio and video entertainment. Launched to cater to audiophiles and home cinema enthusiasts, this receiver is known for its robust performance, extensive connectivity options, and user-friendly features, making it a popular choice among consumers.

At the heart of the TX-DS696 is its impressive multichannel processing capabilities. Supporting Dolby Digital and DTS surround sound formats, it delivers immersive audio experiences that enhance the enjoyment of movies, music, and games. The 5.1 channel configuration allows for exceptional sound staging, giving users a truly cinematic experience right in their living rooms.

One of the standout features of the TX-DS696 is its advanced room calibration technology. The receiver analyzes the acoustic characteristics of the room and adjusts the speaker settings accordingly, optimizing sound quality for any space. This ensures that listeners can enjoy a balanced audio performance regardless of their room’s layout or size.

Connection options are plentiful, with multiple audio and video inputs that facilitate direct connections to various devices. The receiver includes several composite and S-Video inputs, along with digital optical and coaxial inputs, allowing users to connect DVD players, gaming consoles, and other multimedia devices easily. The support for component video ensures high-quality image transfer, making it an excellent choice for those who want to enjoy high-definition video.

In terms of power, the TX-DS696 boasts a robust amplifier section capable of delivering rich and dynamic sound across all channels. The built-in high-current amplification technology ensures that even demanding speakers are driven effortlessly, resulting in clean and distortion-free audio at all volume levels.

The user interface is intuitive, with an easy-to-read LCD display and a well-laid-out remote control that provides convenient access to all the receiver’s functions. Additionally, the Onkyo TX-DS696 is compatible with various external devices, allowing for custom configurations that cater to personal preferences.

Overall, the Onkyo TX-DS696 stands out as an exemplary home theater receiver that combines advanced technology, user-friendly features, and powerful performance. Whether you’re a dedicated home theater enthusiast or a casual listener, this receiver offers a rich audio experience that is hard to match. Its blend of performance, versatility, and value makes it a lasting favorite in the realm of home audio systems.
Top Page Image Contents