Onkyo TX-DS696 appendix Front panel facilities

Page 9

Front panel facilities

For operational instructions, see page indicated in brackets [ ].

POWER switch [19]

Turns on and off the main power supply for the TX-DS696.

STANDBY indicator [7, 19]

Lights when the TX-DS696 is in the standby state and flashes when a signal is received from the remote controller.

STANDBY/ON button [19]

Press to turn on the TX-DS696 when in the standby state. Press again to return the TX-DS696 to the standby state.

REC OUT button [44]

Press the REC OUT button to output the audio signals to a recording component for recording purposes.

ZONE 2 button [45] and indicator

Press the ZONE 2 button to enjoy the output from the TX-DS696 in a different room, which is referred to as a remote zone (Zone 2).

ZONE 2 indicator lights when a signal is output to the remote zone (Zone 2). When the ZONE 2 indicator is off, then either output to the remote zone is turned off or Rec Out is selected.

ZONE 2 LEVEL button [45]

Press to enter the mode for adjusting the volume in the remote zone (Zone 2).

CH LEVEL button [30]

Press to select the channel whose level is to be adjusted.

MASTER VOLUME dial [29, 31]

The MASTER VOLUME dial is used to control the volume for the main zone. The volume for the remote zone (Zone 2) is independent.

PHONES jack [29]

This is a standard stereo jack for connecting stereo headphones.

AUDIO SELECTOR button [31]

This button is used to select the type of audio input signal. Each time pressed, the setting cycles from “AUTO” → “Multich” → “Analog” and back.

Input source buttons (DVD, VIDEO 1–4, TAPE, FM, AM, PHONO, and CD) [25, 26, 28, 29, 44, 45]

These buttons are used to select the input source for the main zone. To select the input source for the remote zone (Zone 2) or recording out (Rec Out), first press the Zone 2 or Rec Out button, and then the desired input source button.

BASS dial [31]

Boosts or cuts the bass response. Bass adjustment is effective only for the front speakers and headphones.

TREBLE dial [31]

Boosts or cuts the treble response. Treble adjustment is effective only for the front speakers and headphones.

Front display

Remote control sensor [7]

SMART SCAN NAVIGATOR jog dial and indicators [22-24, 26, 28, 30, 31, 33, 35, 45]

Used to make settings in the Setup menu, change listening mode settings, and more.

SETUP button [22-24, 35]

Press to bring up the Setup menu. The OSD menu will appear on the TV monitor as well as the front display on the TX-DS696.

RETURN button [22-24, 35]

Press to exit the Main menu level or go back one level up.

DISPLAY button [30]

The DISPLAY button is used to display information about the current input source signal. Each time you press the display button, the screen changes to show you different information concerning the input signal.

RT/PTY/TP (European models only) button [28]

This button is only available on European models. Use this button to help tune into the Radio Data System (RDS) for FM broadcasting. RDS was developed within the European Broadcasting Union (EBU) and is available in most European countries. Each time the button is pressed, the display changes from RT (radio text) to PTY (program type) to TP (traffic program) and then back to RT again.

DIMMER (other than European models) button [30]

Press to set the brightness of the front display. There are 3 settings available: normal, dark, and very dark.

FM MODE button [25]

If you are listening to an FM radio station in stereo and the sound cuts out or there is a great deal of noise, switch from STEREO to MONO. Each time this button is pressed, the AUTO indication flashes and the stereo mode changes from AUTO to MONO and vice versa. This button also turns on and off the FM MUTE.

PRESET MEMORY button [26]

This button is used to assign the radio station that is currently tuned in to a preset channel or delete a previously preset station.

TUNING / buttons [25]

Use these buttons to change the tuner frequency. The tuner frequency is displayed in the front display and it can be changed in 50 kHz increments for FM and 10 kHz (or 9 kHz) increments for AM.

When FM is selected, you can hold down one of the tuning buttons and then release it to activate the auto-search feature. It will search for a station in the direction of the button you pressed and stop when it tunes into one.

PRESET / buttons [26]

When AM or FM is selected as the input source, press one of these buttons to jump to a radio station that you preset using the PRESET MEMORY button. Pressing the right button moves from the most recently preset station to older ones, and pressing the left button moves in the reverse order.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents TX-DS696 Avis Important SafeguardsPrecautions Contents Contents Supplied accessories FeaturesSetting the Voltage selector Worldwide models only Before using this unitUsing the remote controller Installing the remote controller batteriesFront panel facilities Front panelFront panel display Front panel facilities Remote controller Remote controller Connections Connecting power amplifiers Voltage selectorImproper connection Inserted completely Optical digital input terminalConnecting a turntable Phono Connecting your audio componentsConnecting a compact disc player CD ConnectionsFlow of the video signals is as follows Connecting your video componentsConnecting a DVD player DVD Audio connection cable Left White Video connection cableConnecting a satellite tuner or television Video Connecting a video cassette recorder VideoConnecting a television monitor or projector Connecting settop box or video camera, etc. VideoPower on/ready function Connecting power amplifiersPower off function Connect to devices with z terminalsPositioning speakers Connecting speakers Connecting speakersStandard speaker placement Check the impedance of the speakers you are connectingConnecting the speaker cable Connecting a subwoofer Connecting speakersConnecting the remote zone speakers 345Connecting the power Connecting the AM antenna cable Connecting antennasConnecting the included antennas Assembling the AM loop antennaConnecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageSpeaker Configuration submenu Speaker setupPress the Setup button Buttons to be usedSpeaker Distance submenu Speaker setupTurn the jog dial to adjust About the other settingsLevel Calibration submenu Press the jog dial againTuning into a radio station Listening to a stereo radio station FM modeListening to Radio Broadcasts Selecting a preset radio station Presetting a radio stationErasing a preset radio station Listening to Radio BroadcastsListening to RDS broadcasts European models only What is RDS?Listening to RDS broadcasts PTY program types in EuropeDisplaying Radio Text RT Listening to RDS broadcastsPerforming a TP scan Performing a PTY scanListening with headphones Adjusting the bass and trebleEnjoying music or videos with the TX-DS696 Temporarily turning off the soundAdjusting the brightness of the front display Switching the displayUsing the sleep time remote controller only Enjoying music or videos with the TX-DS696Using the tone control Changing the audio modeAdjust the tone using the Bass and Treble dials Enjoying the multichannel outputListening modes Using listening modeChanging the listening mode Using listening modeUsing Cinema Re-Equalization Listening Mode Buttons Re-EQMain menu Setup menusMenu Sub menuSetup menus Navigating through the Setup menuSetting procedures and button operations Tip Speaker Setup menuSpeaker Distance sub-menu Speaker Config sub-menuLevel Calibration sub-menu Calibrating the speaker levelsInput Setup menu InputSource Video Setup sub-menu Audio Setup sub-menuDigital Input MultichannelInput source signals Listening Mode Preset sub-menu IntelliVolume sub-menuIntelliVolume Analog/PCM SourceDescription listening mode parameters Listening Mode Setup menuRelationship between listening mode and parameter Front EffectHeadphones Level sub-menu Volume Setup sub-menuLate Night Setup sub-menu AM Freq Step Setup sub-menu Worldwide model onlyOSD Setup sub-menu OSD Setup menuOSD Config sub-menu OSD Position sub-menuRecording the input source REC OUT selector RecordingRecording both the audio and video Recording a source different from that you are listening toEnjoying music in the remote zone Calling up a preset radio station Using remote controllerOverview Controlling an Onkyo cassette tape deckPress the CD Mode button Using remote controllerDisc Stdby CD Mode Controlling an Onkyo CD playerReturn DVD Mode Press the DVD Mode buttonControlling an Onkyo DVD player Disc VOL TOP Menu Audio Muting Angle Subtitle DVDPress the MD Mode button SAT, CABLE, VCR, and TV Mode buttonsControlling an Onkyo MD recorder To 9, 0, --/--- Numeric keysLearning a pre-programming code SEND/LEARN indicator Buttons thatLearning a pre-programming code Within 30 seconds, enter the 3-digit code numberPre-programmong codes Learning a pre-programming codeDVD Mode DVD Player Mode Operating your programmed remote controllerSAT Mode Satellite Tuner Mode Cable Mode Cable Tuner ModeVCR Mode VCR Mode Operating your programmed remote controllerTV Mode TV Mode Press the VCR Mode buttonMode Direct Mode Macro Programming procedureSEND/LEARN LightPage Erasing all the commands programmed under a Mode button Erasing the programmed command from one buttonPress and release the same Mode button again SEND/LEARN indicator Mode buttonsWhat is a Macro function? Using a Macro functionPress the Mode Macro button to complete the programming Programming a Macro functionUsing a Macro function Programming the Direct Macro functionRunning a Direct Macro function Press the Mode Macro button again Erasing a macro from the Mode Macro buttonDirect Macro Mode buttons Erasing a direct macro from the Direct Macro buttonMacro mode programming memo Erasing all commands and macros that have been programmedPress the Enter button OperationAmplifier Section SpecificationsTroubleshooting guide Troubleshooting guide Video and AudioIf one of the messages shown below appears Onkyo U.S.A. Corporation Onkyo Europe Electronics GmbHOnkyo China Limited

TX-DS696 specifications

The Onkyo TX-DS696 is a powerful and versatile home theater receiver that has left a significant mark in the world of audio and video entertainment. Launched to cater to audiophiles and home cinema enthusiasts, this receiver is known for its robust performance, extensive connectivity options, and user-friendly features, making it a popular choice among consumers.

At the heart of the TX-DS696 is its impressive multichannel processing capabilities. Supporting Dolby Digital and DTS surround sound formats, it delivers immersive audio experiences that enhance the enjoyment of movies, music, and games. The 5.1 channel configuration allows for exceptional sound staging, giving users a truly cinematic experience right in their living rooms.

One of the standout features of the TX-DS696 is its advanced room calibration technology. The receiver analyzes the acoustic characteristics of the room and adjusts the speaker settings accordingly, optimizing sound quality for any space. This ensures that listeners can enjoy a balanced audio performance regardless of their room’s layout or size.

Connection options are plentiful, with multiple audio and video inputs that facilitate direct connections to various devices. The receiver includes several composite and S-Video inputs, along with digital optical and coaxial inputs, allowing users to connect DVD players, gaming consoles, and other multimedia devices easily. The support for component video ensures high-quality image transfer, making it an excellent choice for those who want to enjoy high-definition video.

In terms of power, the TX-DS696 boasts a robust amplifier section capable of delivering rich and dynamic sound across all channels. The built-in high-current amplification technology ensures that even demanding speakers are driven effortlessly, resulting in clean and distortion-free audio at all volume levels.

The user interface is intuitive, with an easy-to-read LCD display and a well-laid-out remote control that provides convenient access to all the receiver’s functions. Additionally, the Onkyo TX-DS696 is compatible with various external devices, allowing for custom configurations that cater to personal preferences.

Overall, the Onkyo TX-DS696 stands out as an exemplary home theater receiver that combines advanced technology, user-friendly features, and powerful performance. Whether you’re a dedicated home theater enthusiast or a casual listener, this receiver offers a rich audio experience that is hard to match. Its blend of performance, versatility, and value makes it a lasting favorite in the realm of home audio systems.
Top Page Image Contents