Onkyo TX-DS696 appendix Using listening mode, Listening modes

Page 32

Using listening mode

The TX-DS696’s surround sound enables you to enjoy the presence of a movie theater or concert hall in your room.

The configuration of the speakers are very important for the surround sound. Refer to “Connecting speakers” on page 17.

Before using a listening mode, make sure the Speaker Setup parameters have been set (refer to page 22-24). Once the parameters have been set, it is not necessary to set them again.

Listening modes

Stereo

This mode has all input sounds output from the left and right front speakers.

Direct

This mode delivers pure sound with minimum sound quality adjustment and filtration. The sound recorded for the right and left front channels is output to the right and left front speakers only and not output to the subwoofer.

Surround modes

With this mode, decoding is performed automatically to match the input signal. This original mode adds no sound processing to the input signal.

•Dolby D (Dolby Digital)

Digital data with AC-3 compression and a maximum of 5.1- channel* surround sound. This source signal comes from DVDs

and LDs that have the mark and therefore recorded for 5.1- channel output. This source also comes from digital satellite broadcasts that support dolby Digital.

•DTS

DTS (Digital Theater System) is compressed digital data with a maximum 5.1-channel* surround output that allows for an extremely high-quality sound. This source signal requires a

DVD player that supports DTS output and comes from compact discs, DVDs, and LDs that have the mark.

Notes on DTS:

•If you play a CD or LD that supports DTS when the “Analog” setting is selected on the TX-DS696, the DTS encoded signal will not be decoded and noise will be output. This noise could damage the amplifier and speakers. Therefore, be sure to selected “Auto” and use the digital input jacks (OPTICAL or COAXIAL) to connect the DTS source.

•The DTS indicator on the TX-DS696 lights while a DTS source is played. When playback finishes and the DTS signal transmission stops, the TX-DS696 remains in DTS mode and the DTS indicator remains lit. This prevents noise when you operate the pause or skip button on the player. Therefore, if the source is immediately switched from DTS to PCM, the PCM signal may not be played. In this case, stop the playback of the source on the player for about three seconds and then resume playback.

•If you press the pause or skip button on the player while playing a DTS source, on rare occasions a short noise may be heard. This is not a malfunction.

•You may not be able to play some DTS source signals from certain CD players and LD players even if you connect the player to the TX-DS696 digitally. This is because the digital signal has been processed (such as the output level, sampling frequency, or frequency response) and the TX-DS696 cannot recognize the signal as DTS data. Therefore you may hear noise when you play a DTS source while processing the signal.

•The outputs for the VIDEO 1 OUT, VIDEO 2 OUT, TAPE OUT, output analog audio signals. Do not record from CDs or LDs that support DTS using these outputs. If you do, the DTS-encoded signal will be recorded as noise.

* The 5.1-channel digital surround format has a variety of versions including Dolby Digital and DTS. The 5.1- channel digital surround format enables you to individually record and play five full-range (20 Hz to 20 kHz) channels (left and right front, center, and two surround channels) plus an LFE channel (Low Frequency Effect) for the low-range effect sound. It will create a realistic sound that can be heard in the theaters and concert halls.

•DOLBY PRO LOGIC II Surround

This mode is a new generation 5-channel surround system that provides performance between the 4-channel (left front, right front, center, and monaural surround) Pro Logic Surround and the 5.1-channel Dolby Digital Surround. This mode can be set to the Movie mode designed for playing movies and the Music mode designed for listening to music. The Movie mode is monaural except for a stereo narrow band for the surround channels. The result is movie viewing with a realistic feel of movement. The Music mode uses the surround channels to provide a natural sound space that cannot be provided with normal stereo output.

This mode can be used with VHS and DVD videos with the

mark and certain television programs. The Music mode can be used with music compact discs and other stereo sources.

You can press the SURR button on the remote controller to switch between MOVIE and MUSIC. The initial setting is MOVIE. This setting can be made for each input source.

If no surround speakers are connected, then the surround sound is divided and output from the front left and right channels (3 stereo).

Orchestra

This mode is appropriate for classical and opera music. The center channel is cut and the surround channels are emphasized to widen the stereo image. It will simulate the natural reverberation that is created in large halls.

TV Logic

This mode gives realistic acoustics to TV programs that are aired from TV studios. It enhances the entire surround sound and clarity of the conversation.

Unplugged

This mode is suitable for acoustical instrumental sounds, vocals, and jazz music. By emphasizing the front stereo image, it will simulate the acoustics that you would experience in front of the stage.

Studio-Mix

This mode is for rock and popular music. The lively sounds are enhanced for a powerful acoustic image that simulates the feeling of being in a club or rock concert.

All Ch Stereo

This mode is designed for playing background music. The front, surround, and surround back channels create a stereo image that encompasses the entire area.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents TX-DS696 Important Safeguards AvisPrecautions Contents Contents Features Supplied accessoriesBefore using this unit Setting the Voltage selector Worldwide models onlyUsing the remote controller Installing the remote controller batteriesFront panel display Front panel facilitiesFront panel Front panel facilities Remote controller Remote controller Connecting power amplifiers Voltage selector ConnectionsImproper connection Inserted completely Optical digital input terminalConnecting your audio components Connecting a turntable PhonoConnecting a compact disc player CD ConnectionsConnecting your video components Flow of the video signals is as followsConnecting a DVD player DVD Audio connection cable Left White Video connection cableConnecting a video cassette recorder Video Connecting a satellite tuner or television VideoConnecting a television monitor or projector Connecting settop box or video camera, etc. VideoConnecting power amplifiers Power on/ready functionPower off function Connect to devices with z terminalsConnecting speakers Positioning speakers Connecting speakersStandard speaker placement Check the impedance of the speakers you are connectingConnecting speakers Connecting the speaker cable Connecting a subwooferConnecting the remote zone speakers 345Connecting the power Connecting antennas Connecting the AM antenna cableConnecting the included antennas Assembling the AM loop antennaConnecting antennas Connecting an FM outdoor antennaConnecting an AM outdoor antenna Directional linkageSpeaker setup Speaker Configuration submenuPress the Setup button Buttons to be usedSpeaker setup Speaker Distance submenuAbout the other settings Turn the jog dial to adjustLevel Calibration submenu Press the jog dial againListening to Radio Broadcasts Tuning into a radio stationListening to a stereo radio station FM mode Presetting a radio station Selecting a preset radio stationErasing a preset radio station Listening to Radio BroadcastsWhat is RDS? Listening to RDS broadcasts European models onlyListening to RDS broadcasts PTY program types in EuropeListening to RDS broadcasts Displaying Radio Text RTPerforming a TP scan Performing a PTY scanAdjusting the bass and treble Listening with headphonesEnjoying music or videos with the TX-DS696 Temporarily turning off the soundSwitching the display Adjusting the brightness of the front displayUsing the sleep time remote controller only Enjoying music or videos with the TX-DS696Changing the audio mode Using the tone controlAdjust the tone using the Bass and Treble dials Enjoying the multichannel outputUsing listening mode Listening modesUsing listening mode Changing the listening modeUsing Cinema Re-Equalization Listening Mode Buttons Re-EQSetup menus Main menuMenu Sub menuSetting procedures and button operations Setup menusNavigating through the Setup menu Speaker Setup menu TipSpeaker Config sub-menu Speaker Distance sub-menuLevel Calibration sub-menu Calibrating the speaker levelsSource Input Setup menuInput Audio Setup sub-menu Video Setup sub-menuDigital Input MultichannelListening Mode Preset sub-menu IntelliVolume sub-menu Input source signalsIntelliVolume Analog/PCM SourceListening Mode Setup menu Description listening mode parametersRelationship between listening mode and parameter Front EffectVolume Setup sub-menu Headphones Level sub-menuLate Night Setup sub-menu AM Freq Step Setup sub-menu Worldwide model onlyOSD Setup menu OSD Setup sub-menuOSD Config sub-menu OSD Position sub-menuRecording Recording the input source REC OUT selectorRecording both the audio and video Recording a source different from that you are listening toEnjoying music in the remote zone Using remote controller Calling up a preset radio stationOverview Controlling an Onkyo cassette tape deckUsing remote controller Press the CD Mode buttonDisc Stdby CD Mode Controlling an Onkyo CD playerPress the DVD Mode button Return DVD ModeControlling an Onkyo DVD player Disc VOL TOP Menu Audio Muting Angle Subtitle DVDSAT, CABLE, VCR, and TV Mode buttons Press the MD Mode buttonControlling an Onkyo MD recorder To 9, 0, --/--- Numeric keysSEND/LEARN indicator Buttons that Learning a pre-programming codeLearning a pre-programming code Within 30 seconds, enter the 3-digit code numberLearning a pre-programming code Pre-programmong codesOperating your programmed remote controller DVD Mode DVD Player ModeSAT Mode Satellite Tuner Mode Cable Mode Cable Tuner ModeOperating your programmed remote controller VCR Mode VCR ModeTV Mode TV Mode Press the VCR Mode buttonProgramming procedure Mode Direct Mode MacroSEND/LEARN LightPage Erasing the programmed command from one button Erasing all the commands programmed under a Mode buttonPress and release the same Mode button again SEND/LEARN indicator Mode buttonsUsing a Macro function What is a Macro function?Press the Mode Macro button to complete the programming Programming a Macro functionRunning a Direct Macro function Using a Macro functionProgramming the Direct Macro function Erasing a macro from the Mode Macro button Press the Mode Macro button againDirect Macro Mode buttons Erasing a direct macro from the Direct Macro buttonErasing all commands and macros that have been programmed Macro mode programming memoPress the Enter button OperationSpecifications Amplifier SectionTroubleshooting guide If one of the messages shown below appears Troubleshooting guideVideo and Audio Onkyo China Limited Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH

TX-DS696 specifications

The Onkyo TX-DS696 is a powerful and versatile home theater receiver that has left a significant mark in the world of audio and video entertainment. Launched to cater to audiophiles and home cinema enthusiasts, this receiver is known for its robust performance, extensive connectivity options, and user-friendly features, making it a popular choice among consumers.

At the heart of the TX-DS696 is its impressive multichannel processing capabilities. Supporting Dolby Digital and DTS surround sound formats, it delivers immersive audio experiences that enhance the enjoyment of movies, music, and games. The 5.1 channel configuration allows for exceptional sound staging, giving users a truly cinematic experience right in their living rooms.

One of the standout features of the TX-DS696 is its advanced room calibration technology. The receiver analyzes the acoustic characteristics of the room and adjusts the speaker settings accordingly, optimizing sound quality for any space. This ensures that listeners can enjoy a balanced audio performance regardless of their room’s layout or size.

Connection options are plentiful, with multiple audio and video inputs that facilitate direct connections to various devices. The receiver includes several composite and S-Video inputs, along with digital optical and coaxial inputs, allowing users to connect DVD players, gaming consoles, and other multimedia devices easily. The support for component video ensures high-quality image transfer, making it an excellent choice for those who want to enjoy high-definition video.

In terms of power, the TX-DS696 boasts a robust amplifier section capable of delivering rich and dynamic sound across all channels. The built-in high-current amplification technology ensures that even demanding speakers are driven effortlessly, resulting in clean and distortion-free audio at all volume levels.

The user interface is intuitive, with an easy-to-read LCD display and a well-laid-out remote control that provides convenient access to all the receiver’s functions. Additionally, the Onkyo TX-DS696 is compatible with various external devices, allowing for custom configurations that cater to personal preferences.

Overall, the Onkyo TX-DS696 stands out as an exemplary home theater receiver that combines advanced technology, user-friendly features, and powerful performance. Whether you’re a dedicated home theater enthusiast or a casual listener, this receiver offers a rich audio experience that is hard to match. Its blend of performance, versatility, and value makes it a lasting favorite in the realm of home audio systems.
Top Page Image Contents