Technicolor - Thomson TCW710 manual Contact Your Local Cable Company, Important Information

Page 12

Chapter 1: Connections and Setup

Contact Your Local Cable Company

You will need to contact your cable company to establish an Internet account before you can use your gateway. You should have the following information ready (which you will find on the sticker on the gateway):

The serial number

The model number

The Media Access Control (MAC) address

Please verify the following with the cable company:

The cable service to your home supports EURO-DOCSIS-compliant two-way modem access.

Your Internet account has been set up.

You have a cable outlet near your PC and it is ready for cable modem service.

Note: It is important to supply power to the modem at all times. Keeping your modem plugged in will keep it connected to the Internet. This means that it will always be ready when you are. To disconnect your computer from the Internet, use the ON/OFF button to put the modem in standby mode.

Important Information

Your cable company should always be consulted before installing a new cable outlet. Do not attempt any rewiring without contacting your cable company first.

4

Image 12
Contents TCW710 EURO-DOCSIS/DOCSIS compliant Operating Information Product InformationImportant Information Table of Contents Table of Contents Table of Contents Viii Connections and Setup Introduction Wireless Cable Gateway FeaturesWhat’s on the CD-ROM Computer RequirementsWhat the Wireless Cable Gateway Does What the Wireless Cable Gateway Needs to Do Its JobContact Your Local Cable Company Please verify the following with the cable companyImportant Information System Overview Understanding the Wireless Cable Gateway Connect Your PC Installing a PC Network Card Your PC Installing a TCP/IP Stack Connections and Setup Your PC Configuring Dhcp on a TCP/IP Stack on a PC Configuring Windows Me PCs Configuring Windows 2000 PCs Configuring Windows XP PCsConnecting Your Devices Activating the Wireless Cable Gateway InitializationMandatory User Configuration Connections and Setup Your connection to the network to be rejected Overview Front Panel Press Button Rear Panel Communications Type of CommunicationCable Modem CM Section Networking Section Cable Modem CM Mode Three Networking ModesNetworking Residential Gateway RG Mode Networking CableHome CH Mode USB MAC Address MAC and IP Addresses Summary Advanced Configuration Advanced User ConfigurationAdvanced Configuration Status Web Page Group Software Web Connection Web Password Web Diagnostics Web Network Web Page Group WAN Web LAN and Computers Web Pages Advanced Configuration Advanced Web Page Group Options Web IP Filtering Web MAC Filtering Web Port Filtering Web Forwarding Web Port Triggers Web Advanced Configuration DMZ Host Web Routing Information Protocol Setup Web Advanced Configuration Advanced Configuration Time of Day Access Filter Web Local Log and Remote Log Web Pages Advanced Configuration Wireless Web Pages Group AuthenticationPerformance Privacy 802.11b/g Basic WebBasic Settings Definitions 802.11b/g Privacy Web Privacy Settings Definitions WPA WPA-PSK 802.11b/g Advanced Web Advanced Settings Definitions 802.11b/g Access Control Web Advanced Configuration Bridging Web Frequently Asked Questions Additional InformationAdditional Information General Troubleshooting All of the lights are flashing in sequenceCan’t get the modem to establish an Ethernet connection Don’t hear a dial tone when I use a telephone Computing Device Accessory Additional Information Service Information Glossary Page Thomson Inc