Technicolor - Thomson TCW710 manual Privacy Settings Definitions

Chapter 3: Advanced Configuration

Setting	Description	Value List or Range	Default
Network	Sets the network authentication	Disabled, 802.1x, WPA, WPA-PSK	Disabled
	method. 802.1X and WPA require that
Authentication	valid RADIUS parameters be set.
	WPA-PSK requires a valid WPA
	Pre-Shared Key to be set.
WPA Pre-Shared	Sets the WPA Pre-Shared Key (PSK).	Depends on Network	<NULL>
		Authentication setting. See Table
Key		3.
WPA Group Rekey	Sets the WPA Group Rekey Interval in	Depends on Network	0
	seconds. Set to zero to disable	Authentication setting. See Table
Interval	periodic rekeying.	3.
RADIUS Server	Sets the IP address of the RADIUS	Depends on Network	<NULL>
	server to use for authentication and	Authentication setting. See Table
	dynamic key derivation.	3.
RADIUS Port	Sets the UDP port number of the	Depends on Network	1812
	RADIUS server. The port number is	Authentication setting. See Table
	usually 1812 or 1645 and depends	3.
	upon the server.
RADIUS KEY	Sets the shared secret for the RADIUS	Depends on Network	<NULL>
	connection.	Authentication setting. See Table
		3.
Data Encryption	Selecting Off disables data encryption.	Depends on Network	Off (Disabled, 802.1x);
	Selecting WEP enables WEP data	Authentication setting. See Table	TKIP (WPA, WP-PSK)
	encryption and requires that a valid	3.
	network key be set and selected
	unless 802.1X is enabled.
Shared Key	Sets whether shared key	Depends on Network	Optional
Authentication	authentication is required to	Authentication setting. See Table
	associate. A valid network key must be	3.
	set and selected if required.
PassPhrase1	Sets the text to use for WEP keys	Depends on Network	<NULL>
	generation.	Authentication and Data
		Encryption settings. See Table 3
		and Table 4.
Network Key 1 thru	Enter 5 ASCII characters or 10	Depends on Network	<NULL>
Network Key 4	hexadecimal digits for a 64-bit key.	Authentication and Data
	Enter 13 ASCII characters or 26	Encryption settings. See Table 3
	hexadecimal digits for a 128-bit key.	and Table 4.
Current Network	Selects which network key is used for	Depends on Network	1
Key	encrypting outbound data and/or	Authentication and Data
	authenticating clients.	Encryption settings. See Table 3
		and Table 4

Table 2. Privacy Settings Definitions

Illustrations contained in this document are for representation only. 57