Sharp X2 manual Power Save, Maintenance, Interval, Date & Time, Set

Menu options (con’t)

Set mode (con’t)

Additional options available through the SET menu.

Option	Description	Parameters
Power Save	Sets the idle time before the printer goes into its	OFF -- 60min
	power save mode.	(in 5min interval)
Maintenance	Sets the frequency in which the printer runs the	NONE/SHORT/MIDDLE/LONG
Interval	maintenance routine.
Init Cut	Enables/disables a media cut during new media	YES/NO
	initialization. (Enable only when loading new
	media and you know the media has a straight
	edge.)
Date & Time	Sets the date and time. Use the cursor arrow	YYYY/MM/DD
Set	buttons <CSR> to move from year>month>date	HH/MM/SS
	or hour>minutes>seconds. Use the + or –
	buttons to change the time and date numbers.

<SET>S MEDIA ATTRIBUTE Î POWER SAVE Î

<MORE>

<POWER SAVE>	S
* OFF	+
	-
	ENTER Î

<SET>S MAINT. INTERVAL Î

INIT CUT Î <MORE>

<SET>S DATE SETÎ TIME SETÎ

<MORE>

<MAINT. INTERVAL>	S
* LONG	+
	-
ENTER Î
<INIT CUT>	S
* YES	+
	-
ENTER Î
<DATE SET>	S
* 2000/01/01	+
YYYY/MM/DD	-
<CSR> ENTER Î
<TIME SET>	S
* 12:34:56	+
HH:MM:SS	-

<CSR> ENTER Î

18 Operations