Sharp AJ2000 manual Changing Ink Tank part, Open the front cover Remove the old ink tank

Page 32

Changing Ink Tank (part 1)

Maintenance

Ensure the printer is turned on before following the steps below on how to change the ink tank.

1	Open the front cover.	2	Remove the old ink tank.
	The carriage will automatically move to the center position.		While pressing the tab forward, remove the ink tank.

Press the tab forward.

Do not put your hands into the printer until the carriage stops at the center position. Doing so may hurt your hands. Do not try to move the carriage manually by force, you may damage the printer.

Example for the yellow ink tank

Do not lift the print head latch to replace the ink tank.

								30


How to Use the			Printer Properties		Print	Maintenance		Troubleshooting
Online Manual			Printer Properties		Print	Maintenance		Troubleshooting
Online Manual

Image 32

Contents Page Contents How to Use the Online Manual How to Use the Online ManualOutline of the Printer Driver Printer Driver Functions CopiesPaper Settings Dialog Box part Make additional changesPaper Size Custom PaperOrientation Zoom%Main Menu Settings part Up Printing OrderPaper Menu Settings part ReferenceGuaranteed area and printable areaPaper Selection Media TypeGuaranteed area and printable area Output PaperAdvanced Menu Settings DraftOutput Quality Dialog Box ColorSyncWatermark Menu Settings part Text Edit Fonts buttonVersion Menu Settings About buttonMaintenance Dialog Box Remaining ink indicator windowPrinting Overview PrintSelect the AJ-1800/2000 printer icon Using the ChooserSelect Chooser from the Apple menu Close the Chooser Click the OK button in the Paper Settings dialog box Basic Printing partTo print a single copy of a document, confirm 1 How to Print a Watermark Printing a WatermarkEnlarge/Reduce the Printed Image Automatic Zooming to the Loaded PaperPrinting Multiple Pages on One Printing a Photograph To Setup Background Printing Background PrintingPrint Monitor When background printing is OffWhen background printing is On Print Monitor Functions Time to Change the Ink Tank Ink low error message is displayedMaintenance Changing Ink Tank part Open the front cover Remove the old ink tankProperly align the tab when inserting Confirm the ink lamp is not blinking Change the print head Test Print HeadCheck the result of the test Cleaning the Print Head Changing the Print Head part Open the front cover Raise the print head latchRemovecase. the new print head from its protective Lower the print head latchHead, always align the print head Close the front coverTo maintain print quality after changing the print Aligning the Print Head part Select a pattern sample for Pattern aClick the OK button in the Align print head Dialog boxKeeping the Printer Clean Identifying Printer Problems TroubleshootingPaper is not Fed into the Printer part CHECK1 Is there too much paper in the paper tray?Is the loaded paper too thick or too thin? Trouble feeding stiff envelope or heavyPaper tray? Is the printer on a flat surface?Is the paper curled or folded? Press the paper button Paper JamClose the jam cover, insert the output tray If all the lamps keep blinking CHECK1 Is the power cord connected?Printer Inoperative Nothing Prints part CHECK10 Has the printer driver been installed properly? Select the item you want to delete in the box Restart your computerFaint, Uneven or Smeared Print Output If the print output is faint or unevenCHECK2 Is the orientation of document setting correct? CHECK3 Is the paper loaded correctly?Driver.Specify the print quality setting in the printer Align the print headUnit does not Print in Color CHECK1 Is the printer driver set to the color print option?Printing is too Slow Index Index