Sharp AJ2000 manual Keeping the Printer Clean

Page 42

Keeping the Printer Clean

Maintenance

Here are a few points and cautions on cleaning the printer. Take the time to read this page before cleaning.

1	Turn off the power using the power button, then
	unplug the power cord.
2	Wipe the surface of the printer and the output tray.
	Wipe with a soft clean cloth without any loose threads.

!When wiping the surface of the printer, keep the front cover closed.

!Do not use cleaning agents containing ammonia, benzene, or thinner. Cleaning the printer with these substances will distort, degenerate or discolor the surfaces.

3	Open the front cover.
4	Check the inside of the printer. If you find stains of
4	splashed ink, paper dust or dirt, wipe them out with

a soft cloth.

If the dirt is sticky and hard to remove, wipe the dirt away with a firmly squeezed wet cloth after soaking it in water.

!When wiping inside the printer, be careful not to hurt yourself on projections inside it.

!Never wipe the portion around the print heads in the printer. Doing so will damage the print heads.

Never wipe the portion around the print heads.

								40


How to Use the			Printer Properties		Print	Maintenance		Troubleshooting
Online Manual			Printer Properties		Print	Maintenance		Troubleshooting
Online Manual

Image 42

Contents Page Contents How to Use the Online Manual How to Use the Online ManualOutline of the Printer Driver Printer Driver Functions CopiesPaper Settings Dialog Box part Make additional changesPaper Size Custom PaperOrientation Zoom%Main Menu Settings part Up Printing OrderPaper Menu Settings part ReferenceGuaranteed area and printable areaPaper Selection Media TypeGuaranteed area and printable area Output PaperAdvanced Menu Settings DraftOutput Quality Dialog Box ColorSyncWatermark Menu Settings part Text Edit Fonts buttonVersion Menu Settings About buttonMaintenance Dialog Box Remaining ink indicator windowPrinting Overview PrintUsing the Chooser Select Chooser from the Apple menu Close the ChooserSelect the AJ-1800/2000 printer icon Click the OK button in the Paper Settings dialog box Basic Printing partTo print a single copy of a document, confirm 1 How to Print a Watermark Printing a WatermarkEnlarge/Reduce the Printed Image Automatic Zooming to the Loaded PaperPrinting Multiple Pages on One Printing a Photograph To Setup Background Printing Background PrintingWhen background printing is Off When background printing is OnPrint Monitor Print Monitor Functions Ink low error message is displayed MaintenanceTime to Change the Ink Tank Changing Ink Tank part Open the front cover Remove the old ink tankProperly align the tab when inserting Confirm the ink lamp is not blinking Test Print Head Check the result of the testChange the print head Cleaning the Print Head Changing the Print Head part Open the front cover Raise the print head latchRemovecase. the new print head from its protective Lower the print head latchClose the front cover To maintain print quality after changing the printHead, always align the print head Aligning the Print Head part Select a pattern sample for Pattern aClick the OK button in the Align print head Dialog boxKeeping the Printer Clean Identifying Printer Problems TroubleshootingIs the loaded paper too thick or too thin? Paper is not Fed into the Printer partCHECK1 Is there too much paper in the paper tray? Trouble feeding stiff envelope or heavyIs the printer on a flat surface? Is the paper curled or folded?Paper tray? Paper Jam Close the jam cover, insert the output trayPress the paper button CHECK1 Is the power cord connected? Printer InoperativeIf all the lamps keep blinking Nothing Prints part CHECK10 Has the printer driver been installed properly? Select the item you want to delete in the box Restart your computerFaint, Uneven or Smeared Print Output If the print output is faint or unevenCHECK2 Is the orientation of document setting correct? CHECK3 Is the paper loaded correctly?Driver.Specify the print quality setting in the printer Align the print headUnit does not Print in Color CHECK1 Is the printer driver set to the color print option?Printing is too Slow Index Index