Sharp AJ2000 manual Aligning the Print Head part, Select a pattern sample for Pattern a

The "Align print head" dialog box will appear, and a test chart will be printed.

Aligning the Print Head (part 1)

Maintenance

Align the print head after installing or changing the print head, or if printed lines are not straight, or have blank spaces. Follow the steps below to align the print head.

1	Make sure that Letter sized paper is set in the tray.	5	Check the test chart results, and change the
			preferences to the best setting for each pattern.
2	Select "Print" from the "File" menu of your
	application, and then click the "Maintenance"
	button ( ).
3	Click the "Start" button of "Print alignment
	patterns".

1 Select a pattern sample for "Pattern A".

		Look at the chart A on your test chart. Select the number
		under the pattern sample, in which			is located the closest
		to the center of the two vertically		parallel lines.
		Example:
4	Click the "Print" button.
		-8		+8
			-8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8

				38
How to Use the	Printer Properties	Print	Maintenance	Troubleshooting
Online Manual