Sharp AJ2000 manual Paper Size, Custom Paper

Page 7

"Paper Settings" Dialog Box (part 2)

Printer Properties

Paper Size

Select an appropriate paper size for your document from menu.

Paper

Size

Ledger

11" x 17"

Letter

8.5" x 11"

Legal

8.5" x 14"

Executive

7.25" x 10.5"

A3

297mm x 420mm

A4

210mm x 297mm

A5

148mm x 210mm

B4

257mm x 364mm

B5

182mm x 257mm

COM10

4.125" x 9.5"

DL

110mm x 220mm

C6

114mm x 162mm

A6

105mm x 148mm

Invitation A2

4.375" x 5.75"

Index card 5" x 8"

5" x 8"

Index card 4" x 6"

4" x 6"

Index card 3" x 5"

3" x 5"

Japanese Hagaki

100mm x 148mm

Banner Letter

8.5" x 11"

Banner A4

210mm x 297mm

(Custom)

Min. : 3.00" x 5.00" (76.2mm x 127.0mm)

 

Max. : 11.70" x 17.00" (297.2mm x 431.8mm)

 

 

!The document size must be smaller than the selected (loaded) paper. If not, printing will occur over the edge of the paper causing the machine to become internally dirty.

!Ledger, A3, or B4 sized paper cannot be used on the printer. To print these image sizes select "Fit To Page" setting by checking the box, or reduce the image size by specifying the ratio at "Zoom[%]" setting.

"N-Up Printing", "Fit To Page", and "Zoom[%]" settings are not available when you select "COM10", "DL", "C6", "Invitation A2", "Japanese Hagaki", "Banner Letter", or "Banner A4" sized paper.

How to Use the

 

 

Printer Properties

 

Online Manual

 

 

 

 

 

 

 

 

 

 

 

 

Custom Paper

When "(Custom)" is selected for "Paper Size" setting, the following dialog box will appear, and you can specify the desired paper size.

Width

Enter a number to customize the width to the custom paper you wish to use.

Length

Enter a number to customize the length to the custom paper you wish to use.

millimeters / inches

Select the units of measurement for paper size settings: either "millimeters" or "inches".

Paper sized larger than 8.5" x 14" (215.9mm x 355.6mm) cannot be used in this printer. You can print the image by using the reduction feature of the "Zoom[%]" setting.

5

Print

Maintenance

Troubleshooting

 

 

 

Image 7
Contents Page Contents How to Use the Online Manual How to Use the Online ManualOutline of the Printer Driver Copies Printer Driver FunctionsMake additional changes Paper Settings Dialog Box partCustom Paper Paper SizeZoom% OrientationMain Menu Settings part Order Up PrintingReferenceGuaranteed area and printable area Paper Menu Settings partMedia Type Paper SelectionOutput Paper Guaranteed area and printable areaDraft Advanced Menu SettingsColorSync Output Quality Dialog BoxWatermark Menu Settings part Edit Fonts button TextAbout button Version Menu SettingsRemaining ink indicator window Maintenance Dialog BoxPrint Printing OverviewSelect Chooser from the Apple menu Close the Chooser Using the ChooserSelect the AJ-1800/2000 printer icon Basic Printing part Click the OK button in the Paper Settings dialog boxTo print a single copy of a document, confirm 1 Printing a Watermark How to Print a WatermarkAutomatic Zooming to the Loaded Paper Enlarge/Reduce the Printed ImagePrinting Multiple Pages on One Printing a Photograph Background Printing To Setup Background PrintingWhen background printing is On When background printing is OffPrint Monitor Print Monitor Functions Maintenance Ink low error message is displayedTime to Change the Ink Tank Open the front cover Remove the old ink tank Changing Ink Tank partProperly align the tab when inserting Confirm the ink lamp is not blinking Check the result of the test Test Print HeadChange the print head Cleaning the Print Head Open the front cover Raise the print head latch Changing the Print Head partLower the print head latch Removecase. the new print head from its protectiveTo maintain print quality after changing the print Close the front coverHead, always align the print head Select a pattern sample for Pattern a Aligning the Print Head partDialog box Click the OK button in the Align print headKeeping the Printer Clean Troubleshooting Identifying Printer ProblemsTrouble feeding stiff envelope or heavy Paper is not Fed into the Printer partCHECK1 Is there too much paper in the paper tray? Is the loaded paper too thick or too thin?Is the paper curled or folded? Is the printer on a flat surface?Paper tray? Close the jam cover, insert the output tray Paper JamPress the paper button Printer Inoperative CHECK1 Is the power cord connected?If all the lamps keep blinking Nothing Prints part CHECK10 Has the printer driver been installed properly? Restart your computer Select the item you want to delete in the boxIf the print output is faint or uneven Faint, Uneven or Smeared Print OutputCHECK3 Is the paper loaded correctly? CHECK2 Is the orientation of document setting correct?Align the print head Driver.Specify the print quality setting in the printerCHECK1 Is the printer driver set to the color print option? Unit does not Print in ColorPrinting is too Slow Index Index