Sharp AJ2000 manual Driver.Specify the print quality setting in the printer, Align the print head

Page 53

Printed Lines are not Straight, or Have Blank Spaces

When printed lines are not straight, or have blank spaces, follow the steps listed below.

1

driver.Specify the print quality setting in the printer

 

Select "Print" from the "File" menu of your application, and

 

then switch the menu to "Advanced" to select "Sharp

 

Special", "Normal", "Best" for the "Print Quality" setting.

 

If you change the setting from "Draft" to any other option

 

and printed lines are still poor, go to step 2.

 

Reference:"Advanced" Menu Settings

2

Align the print head.

Select "Print" from the "File" menu of your application, click

the "Maintenance" button, and then click the "Start" button of "Print alignment patterns" to align the print head. Reference:Aligning the Print Head

How to Use the

 

 

Printer Properties

 

Print

Maintenance

Online Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Troubleshooting

51

Troubleshooting

Image 53
Contents Page Contents How to Use the Online Manual How to Use the Online ManualOutline of the Printer Driver Copies Printer Driver FunctionsMake additional changes Paper Settings Dialog Box partCustom Paper Paper SizeZoom% OrientationMain Menu Settings part Order Up PrintingReferenceGuaranteed area and printable area Paper Menu Settings partMedia Type Paper SelectionOutput Paper Guaranteed area and printable areaDraft Advanced Menu SettingsColorSync Output Quality Dialog BoxWatermark Menu Settings part Edit Fonts button TextAbout button Version Menu SettingsRemaining ink indicator window Maintenance Dialog BoxPrint Printing OverviewSelect the AJ-1800/2000 printer icon Using the ChooserSelect Chooser from the Apple menu Close the Chooser Basic Printing part Click the OK button in the Paper Settings dialog boxTo print a single copy of a document, confirm 1 Printing a Watermark How to Print a WatermarkAutomatic Zooming to the Loaded Paper Enlarge/Reduce the Printed ImagePrinting Multiple Pages on One Printing a Photograph Background Printing To Setup Background PrintingPrint Monitor When background printing is OffWhen background printing is On Print Monitor Functions Time to Change the Ink Tank Ink low error message is displayedMaintenance Open the front cover Remove the old ink tank Changing Ink Tank partProperly align the tab when inserting Confirm the ink lamp is not blinking Change the print head Test Print HeadCheck the result of the test Cleaning the Print Head Open the front cover Raise the print head latch Changing the Print Head partLower the print head latch Removecase. the new print head from its protectiveHead, always align the print head Close the front coverTo maintain print quality after changing the print Select a pattern sample for Pattern a Aligning the Print Head partDialog box Click the OK button in the Align print headKeeping the Printer Clean Troubleshooting Identifying Printer ProblemsCHECK1 Is there too much paper in the paper tray? Paper is not Fed into the Printer partIs the loaded paper too thick or too thin? Trouble feeding stiff envelope or heavyPaper tray? Is the printer on a flat surface?Is the paper curled or folded? Press the paper button Paper JamClose the jam cover, insert the output tray If all the lamps keep blinking CHECK1 Is the power cord connected?Printer Inoperative Nothing Prints part CHECK10 Has the printer driver been installed properly? Restart your computer Select the item you want to delete in the boxIf the print output is faint or uneven Faint, Uneven or Smeared Print OutputCHECK3 Is the paper loaded correctly? CHECK2 Is the orientation of document setting correct?Align the print head Driver.Specify the print quality setting in the printerCHECK1 Is the printer driver set to the color print option? Unit does not Print in ColorPrinting is too Slow Index Index