Sharp AJ2000 manual Paper Jam, Close the jam cover, insert the output tray, Press the paper button

Page 46

Paper Jam

Troubleshooting

If a paper jam occurs, refer to the steps below to remove the paper.

When paper is jammed, the paper lamp will blink fast.

1	Open the jam cover located on the rear of the	2	Take off the output tray to remove the jammed
	printer to remove the jammed paper.		paper.

Gently pull the jammed paper upward by holding both edges of the paper.

If you cannot remove the jammed paper from the jam cover, refer to the next step.

	After removing the jammed paper, be sure to align the
	paper guide to the paper in the paper tray.

3	Close the jam cover, insert the output tray and
3	press the paper button.

Make sure the paper lamp is not blinking.

If the jammed paper will not come out easily, try pulling in the opposite direction. Do not pull too hard as this may damage the printer mechanism. Do not re-use any sheets of paper that have jammed.

								44


How to Use the			Printer Properties		Print	Maintenance		Troubleshooting
Online Manual			Printer Properties		Print	Maintenance		Troubleshooting
Online Manual

Image 46

Contents Page Contents How to Use the Online Manual How to Use the Online ManualOutline of the Printer Driver Printer Driver Functions CopiesPaper Settings Dialog Box part Make additional changesPaper Size Custom PaperOrientation Zoom%Main Menu Settings part Up Printing OrderPaper Menu Settings part ReferenceGuaranteed area and printable areaPaper Selection Media TypeGuaranteed area and printable area Output PaperAdvanced Menu Settings DraftOutput Quality Dialog Box ColorSyncWatermark Menu Settings part Text Edit Fonts buttonVersion Menu Settings About buttonMaintenance Dialog Box Remaining ink indicator windowPrinting Overview PrintSelect Chooser from the Apple menu Close the Chooser Using the ChooserSelect the AJ-1800/2000 printer icon Click the OK button in the Paper Settings dialog box Basic Printing partTo print a single copy of a document, confirm 1 How to Print a Watermark Printing a WatermarkEnlarge/Reduce the Printed Image Automatic Zooming to the Loaded PaperPrinting Multiple Pages on One Printing a Photograph To Setup Background Printing Background PrintingWhen background printing is On When background printing is OffPrint Monitor Print Monitor Functions Maintenance Ink low error message is displayedTime to Change the Ink Tank Changing Ink Tank part Open the front cover Remove the old ink tankProperly align the tab when inserting Confirm the ink lamp is not blinking Check the result of the test Test Print HeadChange the print head Cleaning the Print Head Changing the Print Head part Open the front cover Raise the print head latchRemovecase. the new print head from its protective Lower the print head latchTo maintain print quality after changing the print Close the front coverHead, always align the print head Aligning the Print Head part Select a pattern sample for Pattern aClick the OK button in the Align print head Dialog boxKeeping the Printer Clean Identifying Printer Problems TroubleshootingIs the loaded paper too thick or too thin? Paper is not Fed into the Printer partCHECK1 Is there too much paper in the paper tray? Trouble feeding stiff envelope or heavyIs the paper curled or folded? Is the printer on a flat surface?Paper tray? Close the jam cover, insert the output tray Paper JamPress the paper button Printer Inoperative CHECK1 Is the power cord connected?If all the lamps keep blinking Nothing Prints part CHECK10 Has the printer driver been installed properly? Select the item you want to delete in the box Restart your computerFaint, Uneven or Smeared Print Output If the print output is faint or unevenCHECK2 Is the orientation of document setting correct? CHECK3 Is the paper loaded correctly?Driver.Specify the print quality setting in the printer Align the print headUnit does not Print in Color CHECK1 Is the printer driver set to the color print option?Printing is too Slow Index Index