Sharp AJ2000 manual Properly align the tab when inserting

Page 33

	Changing Ink Tank (part 2)		Maintenance

3	Unpack the ink tank from its protective wrapping	4	Turn the ink upside down, and then immediately
3	and slowly remove the tape.	4	insert it to the print head of corresponding number.

Example for the yellow ink tank

!Hold the tank upright when removing the tape. Do not touch the uncovered opening on the ink tank, as ink will get on your hands.

!Ensure that there are no pieces of tape remaining on the ink tank.

Do not touch this area. The printer may not print if it is dirty.

Match the ink tank number to the print head number.

Make sure that each tab securely fixes the ink tank by pressing here.

Properly align the tab when inserting.

Example for the yellow ink tank

								31


How to Use the			Printer Properties		Print	Maintenance		Troubleshooting
Online Manual			Printer Properties		Print	Maintenance		Troubleshooting
Online Manual

Image 33

Contents Page Contents How to Use the Online Manual How to Use the Online ManualOutline of the Printer Driver Copies Printer Driver FunctionsMake additional changes Paper Settings Dialog Box partCustom Paper Paper SizeZoom% OrientationMain Menu Settings part Order Up PrintingReferenceGuaranteed area and printable area Paper Menu Settings partMedia Type Paper SelectionOutput Paper Guaranteed area and printable areaDraft Advanced Menu SettingsColorSync Output Quality Dialog BoxWatermark Menu Settings part Edit Fonts button TextAbout button Version Menu SettingsRemaining ink indicator window Maintenance Dialog BoxPrint Printing OverviewUsing the Chooser Select Chooser from the Apple menu Close the ChooserSelect the AJ-1800/2000 printer icon Basic Printing part Click the OK button in the Paper Settings dialog boxTo print a single copy of a document, confirm 1 Printing a Watermark How to Print a WatermarkAutomatic Zooming to the Loaded Paper Enlarge/Reduce the Printed ImagePrinting Multiple Pages on One Printing a Photograph Background Printing To Setup Background PrintingWhen background printing is Off When background printing is OnPrint Monitor Print Monitor Functions Ink low error message is displayed MaintenanceTime to Change the Ink Tank Open the front cover Remove the old ink tank Changing Ink Tank partProperly align the tab when inserting Confirm the ink lamp is not blinking Test Print Head Check the result of the testChange the print head Cleaning the Print Head Open the front cover Raise the print head latch Changing the Print Head partLower the print head latch Removecase. the new print head from its protectiveClose the front cover To maintain print quality after changing the printHead, always align the print head Select a pattern sample for Pattern a Aligning the Print Head partDialog box Click the OK button in the Align print headKeeping the Printer Clean Troubleshooting Identifying Printer ProblemsCHECK1 Is there too much paper in the paper tray? Paper is not Fed into the Printer partIs the loaded paper too thick or too thin? Trouble feeding stiff envelope or heavyIs the printer on a flat surface? Is the paper curled or folded?Paper tray? Paper Jam Close the jam cover, insert the output trayPress the paper button CHECK1 Is the power cord connected? Printer InoperativeIf all the lamps keep blinking Nothing Prints part CHECK10 Has the printer driver been installed properly? Restart your computer Select the item you want to delete in the boxIf the print output is faint or uneven Faint, Uneven or Smeared Print OutputCHECK3 Is the paper loaded correctly? CHECK2 Is the orientation of document setting correct?Align the print head Driver.Specify the print quality setting in the printerCHECK1 Is the printer driver set to the color print option? Unit does not Print in ColorPrinting is too Slow Index Index