Sharp MX-2300N, MX-2700N Using a different paper type for covers Covers/Inserts, 100, 200, Sets

Copying a large number of originals at once (Job Build)

The maximum number of originals that
can be fed through the automatic
document feeder at once is 100 sheets.
If you need to copy more than 100 originals as
a single job, the job build function lets you	100
100
divide the originals into sets and feed each set.
(An automatic document feeder must
be installed.)

200

Using two machines to copy a large number of originals (Tandem Copy)

You can divide a copy job between two
machines connected to the same
network.		2 sets
This saves considerable time when
running a large copy job.
To use this function, the tandem
connection setting must be configured	4 sets	2 sets
in the system settings.

Using a different paper type for covers (Covers/Inserts)

This function enables you to use a different type of paper for the front and back covers of a set of copies.

A different type of paper can also be added as an insert at specified pages. (An automatic document feeder must be installed.)

Insert

Insert

Cover

Back cover

Adding inserts when copying on transparency film (Transparency Inserts)

When copying onto transparency film, this function inserts sheets of paper between the sheets of transparency film to keep them from sticking together.

Paper insert

Paper	insert
	Paper	insert

36