Sharp AR-151 operation manual To select a preset copy ratio, To select a zoom ratio

Page 18

REDUCTION/ENLARGEMENT/ZOOM

To select a preset copy ratio:

Preset reduction and enlargement ratios are: 50%, 64%, 78%, 129%, and 200%

To select a zoom ratio:

When a zoom ( or ) key is pressed, the ZOOM indicator will light up and the zoom ratio will be displayed in the display.

2

Making copies

To decrease or increase the zoom ratio rapidly, press and hold down the or key. However, the value will stop at the preset reduction or enlargement ratios. To move beyond these ratios, release the key and then press and hold it

down again.

Set the number of copies using the copy quantity (, ) keys and press the print () key.

BYPASS FEED (including special paper)

The bypass tray automatically feeds up to 50 sheets of standard copy paper and also feeds special papers such as transparency film and labels one sheet at a time. Copy paper measuring from 3-1/2" x 5-1/2" to 8-1/2" x 14" and in the weight range of 14 to 34.5 lbs. can be used in this tray. (For paper weighing from 28 to 34.5 lbs., 8-1/2" x 11" is the maximum size.)

Place the original face down on the original table. Align it with the original scale and close the original cover.

The original image must be smaller than the paper or media for copying.

If the original image is bigger than the paper or media, this may cause smudges on the edges of the copies.

Open the bypass tray and extend the tray.

16

Image 18
Contents AR-151 For Your Records Contents Appendix Getting Started IntroductionConventions used in this manual Safety Precautions Main Features Part Names Operation Panel Copier Installation Do not install your copier in areas that areDo not touch the photoconductive drum green portion Loading Copy Paper Loading Copy Paper Making Copies Normal CopyingNormal Copying Exposure ADJUSTMENT/PHOTO Copying Setting a large originalREDUCTION/ENLARGEMENT/ZOOM To select a preset copy ratio To select a zoom ratioTWO-SIDED Copying TWO-SIDED Copying Auto power shut-off mode Toner Save ModePreheat mode Special FunctionsSetting the power save modes and auto clear time Displaying Total Number of Copies OFFSupplies and User Maintenance Toner Cartridge ReplacementToner Cartridge Replacement Cabinet User MaintenanceToner cartridge life Original table and original coverWhen copier is not in use Transfer chargerCopier TROUBLE? Misfeed RemovalMisfeed in the fusing area Misfeed in the paper feed areaMisfeed in the transport area Maintenance Required Developer RequiredTroubleshooting Problem Possible cause Solution SeeStatus Indicators Indication Cause and remedy SeeAutomatic Exposure Adjustment Specifications AppendixSupplies Types and sizes of copy paperProper storage System Configuration Optional EquipmentSingle Pass Feeder AR-SP3 SpecificationsUsing the SPF Part namesStream feeding mode Misfeed in the SPFSingle Pass Feeder AR-SP3 Sheet Paper Feed Unit AR-DE9 Loading copy paperMisfeed removal Sheet Paper Feed Unit AR-DE9 Index InstallationMaintenance NamesPaper Loading SpecialMaterial Safety Data Sheet Section Physical Chemical Characteristics Osha PEL Acgih TLV None required under normal use Memo Page Sharp Electronics Corporation