Sharp AR-151 operation manual Supplies and User Maintenance, Toner Cartridge Replacement

Page 24

SUPPLIES AND USER MAINTENANCE

This chapter describes how to replace the toner cartridge.

Be sure to use only genuine SHARP parts and supplies.

4

Supplies and user maintenance

22

TONER CARTRIDGE REPLACEMENT

When the toner cartridge replacement required ( ) indicator lights up, replacement of the toner cartridge will be needed soon. Obtain a new cartridge. When the toner cartridge replacement required ( ) indicator blinks, the toner cartridge must be replaced before copying can be resumed. Replace the toner cartridge by following the procedure below.

During a long copy run of a dark original, the ready () indicator may blink, the indicator light up, and the copier stop, even though toner is left. The copier will feed toner up to 2 minutes and then the ready () indicator will light up. Press the print () key to restart copying.

Ensure that the bypass tray is open and then open the side cover while pressing the side cover open button.

Then, push gently on both sides of the front cover to open the cover.

Push the toner cartridge lock release lever and pull the toner cartridge out. Dispose of the old toner cartridge in accordance with local regulations.

Toner cartridge lock release lever

After removing the toner cartridge, do not shake it or tap on it. Doing so may cause a spill of toner.

Image 24
Contents AR-151 For Your Records Contents Appendix Getting Started IntroductionConventions used in this manual Safety Precautions Main Features Part Names Operation Panel Copier Installation Do not install your copier in areas that areDo not touch the photoconductive drum green portion Loading Copy Paper Loading Copy Paper Making Copies Normal CopyingNormal Copying Exposure ADJUSTMENT/PHOTO Copying Setting a large originalREDUCTION/ENLARGEMENT/ZOOM To select a preset copy ratio To select a zoom ratioTWO-SIDED Copying TWO-SIDED Copying Toner Save Mode Preheat modeAuto power shut-off mode Special FunctionsSetting the power save modes and auto clear time Displaying Total Number of Copies OFFSupplies and User Maintenance Toner Cartridge ReplacementToner Cartridge Replacement User Maintenance Toner cartridge lifeCabinet Original table and original coverWhen copier is not in use Transfer chargerCopier TROUBLE? Misfeed RemovalMisfeed in the fusing area Misfeed in the paper feed areaMisfeed in the transport area Maintenance Required Developer RequiredTroubleshooting Problem Possible cause Solution SeeStatus Indicators Indication Cause and remedy SeeAutomatic Exposure Adjustment Specifications AppendixSupplies Types and sizes of copy paperProper storage System Configuration Optional EquipmentSpecifications Using the SPFSingle Pass Feeder AR-SP3 Part namesStream feeding mode Misfeed in the SPFSingle Pass Feeder AR-SP3 Sheet Paper Feed Unit AR-DE9 Loading copy paperMisfeed removal Sheet Paper Feed Unit AR-DE9 Installation MaintenanceIndex NamesPaper Loading SpecialMaterial Safety Data Sheet Section Physical Chemical Characteristics Osha PEL Acgih TLV None required under normal use Memo Page Sharp Electronics Corporation