USER PROGRAMS
Press the print (
) key. The entered program number will be steadily lit and the currently selected parameter number for the program will blink on the right side of the display.
Select the desired parameter using the right copy quantity (
) key. The entered parameter number will blink on the right of the display.
Program | Mode |
|
| Parameters |
|
| |
No. |
|
|
|
| |||
|
|
|
|
|
|
| |
1 | Auto clear time | 0 | OFF | 1 | 30 sec. | * 2 | 60 sec. |
|
| 3 | 90 sec. | 4 | 120 sec. | 5 | 10 sec. |
|
|
|
|
|
|
|
|
2 | Preheat mode | 0 | 30 sec. | 1 | 60 sec. | * 2 | 90 sec. |
|
|
|
|
|
|
|
|
3 | Auto power shut- | 0 | 2 min. | * 1 | 5 min. | 2 | 15 min. |
| off timer | 3 | 30 min. | 4 | 60 min. | 5 | 120 min. |
|
|
|
|
|
|
|
|
4 | Stream feeding | 0 | OFF | * 1 | ON |
|
|
| mode |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 | Auto power shut- | 0 | OFF | * 1 | ON |
|
|
| off mode |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Factory default settings are indicated with an asterisk (*).
Press the print (
) key. The
To change the setting or to set another mode, press the clear (
) key. The copier will return to step 2.
Press the light (
) or dark (
) key to return to the normal copy mode.
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
Press the clear (
) key to reset the display to zero.
Press and hold down the clear (
) key for approximately 5 seconds.The total number of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
3
Special functions
21