Sharp AR-151 operation manual Single Pass Feeder AR-SP3, Part names, Specifications, Using the SPF

SINGLE PASS FEEDER (AR-SP3)

The single pass feeder (SPF) holds up to 30 originals for automatic feeding.

Part names

Original guides

Document feeder tray Feeding roller cover

		SPF exit area
Specifications
Acceptable originals	Weight:	14 to 23 lbs.
	Size:	5-1/2" x 8-1/2" to 8-1/2" x 14"
	Capacity: Up to 30 sheets
Power supply	Drawn from the copier
Weight	Approx. 6.6 lbs. (3 kg)
Dimensions	19.6" (W) x 15" (D) x 4.3" (H)
	(498 mm (W) x 380 mm (D) x 110 mm (H))

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.There may be some deviations from these values in individual units.

Using the SPF

(1)Make sure that no original is left on the original table.

(2)Adjust the original guides to the size of originals.

(3)Set the originals face up in the document feeder tray.

7

Optional equipment

37