BYPASS FEED
To close the bypass tray, perform step1 and then step 2 in the illustration and push the round projections at the right of the tray until the tray clicks into place.
Set the paper guides to the copy paper width. Insert the copy paper (print face down) all the way into the bypass tray.
●Paper must be fed narrow side into the feed slot.
● Transparency film, labels, and other special purpose papers must be fed individually.
●When copying onto transparency film, remove each copy promptly. Do not let copies stack up.
●When loading an envelope, make sure that it is straight and flat.
Print face
Press the tray select (
) key to select the bypass tray. Set the number of copies if using standard copy paper. Press the print (
) key.
TWO-SIDED COPYING
Example: The following two originals will be copied onto two sides of copy paper.
2
Making copies
First original | Second original |
Face up or face down | |
Face up | Face down |
17