Sharp UP-820F instruction manual Supervisor Clerk, 104, 1010 g

Supervisor Clerk

This function is used to substitute a supervisor clerk for an ordinary clerk. The supervisor clerk can make entry as an ordinary clerk by assigning the ordinary clerk code. You can use the supervisor clerk function only for substituting for an ordinary clerk. This function is available only in the real clerk key system.

To use this function, insert a real clerk key assigned supervisor clerk, enter the ordinary clerk code and press the ˚key. When you insert a supervisor clerk key and open an existing guest check, the original clerk who usually controls the guest check will automatically be assigned.

NOTE • This function is unavailable when the “overlapped clerk function” is enabled.

•When the supervisor clerk and the original clerk are entered, the operation in OPXZ, X1/Z1, X2/Z2, PGM1, or PGM2 mode is inhibited.

Procedure		To open an existing guest check
	Inserting a supervisor		Clerk code	˚
	clerk key
			(4 digits)

When working outside guest check or opening a new guest check

Example
• When opening a new guest check (GLU code 1010) with this function:
Key operation	Display

Inserting a supervisor clerk key (Clerk#12)

1˚

1010 g

1

ı

NOTE	If it is programmed to display the clerk popup window (“CLERK POPUP” in FUNC.SELECT2
	menu), you can start the operation from a GLU code entry. After you press the gkey, the
	popup window will open for a clerk# entry.

• When receiving payment for the order stored in the GLU code 1010:
Key operation	Display

Inserting a supervisor clerk (Clerk#12)

1010 g

c

104