Vidikron VP-50, VP-60 Adjust the white balance using the and buttons, Changing the Gamma Curve

4.Press the MENU button. The “WHITE BAL.” screen appears.

5.Use the and buttons to select “GAIN RED”.

WHITE BALANCE ADJUST

WHITE BAL. 6500K

GAIN RED			0
GAIN GREEN			0
GAIN BLUE			0
RED OFFSET			0
GREEN OFFSET			0
BLUE OFFSET			0
RESET	:	OFF
SEL.	ADJ.	EXIT EXIT

6. Adjust the white balance using the and buttons.

GAIN RED 0

*If neither the and buttons is pressed within 5 seconds, the current setting is set and the previous screen reappears.

7.Once the adjustment is completed...

Press the EXIT button to return to the main menu. To delete the main menu, press the EXIT button once more.

OSD (On Screen Display) Controls

Information

■Adjusting the white balance

R/G/B GAIN	White balance adjustment for signal level
R/G/B OFFSET	White balance adjustment for black level
RESET	Resets settings to the factory default

values. Use and buttons to select “ON”, then press the MENU button.

■Restoring the factory default settings Select “RESET” under the WHITE BAL. menu.

Changing the Gamma Curve

This feature adjusts the brightness of the midtone areas while keeping shadows and highlights unchanged.

Example: Setting “2.8”

Perform the following operations.

Press the MENU button on the remote control to display the MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “PICTURE ADJUST”, then press the MENU button. The “PICTURE ADJUST” screen appears.

2.Use the ▲ and ▼ buttons to select “GAMMA CURVE”.

3.Use the and buttons to select “2.8”. The mode switches as follows each time the or button is pressed:

1.8 2.2 2.5 2.8 37