Vidikron VP-42HD Setting the Input Skip, To set the Input Skip mode to OFF, HD Type modes, OFF on

Page 49

OSD (On Screen Display) Controls

Information

■HD TYPE modes

These 3 modes are not displayed with correct image signals automatically.

1080B	Standard digital broadcasts
1035I	Japanese “High Vision” signal format
1080A	Special Digital broadcasts (for example: DTC100)

Setting the Input Skip

When this is ON, signals which are not present will be skipped over and only pictures whose signals are being transmitted will be displayed. This setting is valid only for the INPUT SELECT button on the unit.

Example: Set to “OFF”

Press the MENU button on the remote control to display the

MAIN MENU on the screen, then...

1.Use the and buttons to select “SETTING 1”, then press the MENU button. The “SETTING 1” menu appears.

2.Use the and buttons to select “INPUT SKIP”.

3.To set the INPUT SKIP mode to “OFF”...

Use the and buttons to select “OFF”. The mode switches as follows each time the or button is pressed:

OFF ON

SETTING 1

OSD
BNC INPUT	:		COMP
D-SUB TYPE	:		RGB
RGB TYPE	:		AUTO
HD TYPE	:		1080B

INPUT SKIP		:	OFF
FACTORY	:		OFF
NEXT PAGE
SEL.	ADJ.		EXIT EXIT

4.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

■INPUT SKIP settings

OFF	Regardless of the presence of the signal, scan and
	display all signals.
ON	If no input signal is present, skip that signal.

* “SETTING NOW” will appear during the input search.

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu.

Note that this also restores other settings to the factory defaults.

48

Image 49

Contents Page Table of Contents Introduction Contents of the package » The features you’ll enjoy includeOptions Important Information » PrecautionsImportant Information » Warnings and Safety Precautions» To avoid damage and prolong operating life » Plasma monitor cleaning procedure What is Covered Under the Terms of this Limited Warranty Limited WarrantyLimited Warranty Effective Warranty DateImportant Warranty Registration RIGHTS, Limits and ExclusionsVidikron Additional InformationVentilation Requirements for enclosure mounting HOW to Attach Options to the Plasma Monitor» Front View Part Names and FunctionsAUDIO1, AUDIO2, AUDIO3 » Rear View / Terminal BoardExternal Control Y Cb/Pb Rear View / Terminal Board» Remote Control Displays the source settings on the screen Remote ControlDisplay Light» Battery Installation and Replacement » Operating Range » Handling the remote controlVideo Installation» Connecting Your PC or Macintosh Computer Installation» Connecting Your DVD Player » Connecting Your VCR or Laser Disc PlayerRGB » Pin Assignment and Signal Levels for 15 pin RGB analog» Volume » PowerBasic Operations » MuteTo set the timer off » Timer OFFTo cancel the off timer Basic Operations» Aspect Ratio Operations Manual Aspect Ratio ControlsAspect Ratio Controls Intelliwide modeWithin 3 seconds » Aspect Ratio Operation with Computer SignalsButton on the remote control to return to the main menu Change the adjustments or the settings that are storedOSD On Screen Display Controls » Menu Operations Memory. The change is stored until you change it againOSD On Screen Display Controls AdjustImage HD Type Language Adjusting the picture » Picture Adjust MenuUse the and buttons to adjust the contrast Once the adjustment is completed Example Setting the Factory modeTo set to Factory Types of picture modes LW BLK1Reducing noise in the picture Once the setting is completedTypes of noise reduction See below to set White Balance Adjust Setting the White BalanceAdjusting the color to the desired level Adjusting the white balance Adjust the white balance using the and buttonsChanging the Gamma Curve Gamma Curve settings Making the Dither adjustmentsDither settings Adjusting the colorsDiffuse To continue adjusting the audio » Audio Setup MenuColor Chart settings Audio setup menuExample Setting Audio INPUT1 to Video Setting the allocation of the audio connectorsTo set the Audio INPUT1 to VIDEO2 To select a mode » Image Options Settings MenuTo adjust the vertical position To continue making other computer image adjustmentsAdjusting the position of the image Adjusting the ComputerRestoring the factory defaults settings OFFSetting the on-screen menu » Setting 1 Settings MenuTo set the Display OSD to OFF To set the BNC Input mode to Comp Setting the BNC connectorsOSD Orbiter settings BNC Input settingsExample Setting the RGB Type mode to Auto It is set to RGB and can not be adjustedTo set the RGB select mode to Auto RGB Type modesTo set the HD Type mode to 1080B Example Setting the 1080B mode toTo set the Input Skip mode to OFF Setting the Input SkipInput Skip settings HD Type modesUse the and buttons to select ON, then press the Menu button Resetting to the default valuesSetting the Auto Off for computer images » Setting 2 MenuTo turn the Auto Off function on Setting the picture to suit the movie Power / Standby indicatorPerform Steps 1-2 of Pixl PROTECT, then Orbiter Orbiter settingsOrbiter Function settings Adjust the Orbiter function manuallyPerform Steps 1-3 of ORBITER, then InverseSetting the time Setting the time for INVERSE/WHITEPerform Steps 1-3 of INVERSE, then Press the Exit button to return to the Pixl Protect screenImage Sweep Example Setting Image Sweep to onPerform Steps 1-3 of Image SWEEP, then Soften settings Setting the Sidebar Lev. for the sides of the screenPress the Exit button to return to the Image Sweep screen SoftenUse the and buttons to adjust the Sidebar LEV To adjust the Sidebar LEVSetting the screen size for S1/S2 video input Sidebar LEV. settingsPLUG/PLAY Settings S1/S2 SettingsBlack Level settings Perform the following operationsUsing the timer » Setting 3 MenuPreset Time Perform Steps 1-2 of TIMER, thenDaylight Saving Time Preset Time settingsDAY HourUse the and buttons to select Program Program TimerON/OFF Hour To set the Default Input to VIDEO2 Setting the Default InputUse the and buttons to select VIDEO2 → RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ← Input Select settings→ RGB3 ↔ RGB1 ↔ HD2 ↔ HD1 ← Enabling/disabling the front panel controlsTo set the IR Enable to OFF Example Setting OFF Perform the following operationsControl Lock settings To set the Control Lock to onIR Enable settings Loop Out SettingLoop OUT settings To set the Loop OUT to onTo reset back to ALL Press the Clear button ID Number SettingID Number settings When the ID Number has been setUse this feature to configure a 2×2 or 3×3 video wall Video Wall SettingSet the position of each display Example Setting Set the 2x2 or 3x3 video wall Example SettingDivider Perform Steps 1-2 of Video WALL, thenVideo Wall Position settings DISP. ModePress the Exit button to return to the Video Wall screen Auto IDUse Auto ID settingsOn Delay Power on delay Video Wall On Delay settingsLUM SET Link settings Repeat Timer ReptrUse the and buttons to select Reptr Time Divider Source Reptr Time settingsSetting the language for the menus » Language Settings MenuLanguage settings English German French Spanish Italian To select Deutsch» Video Standard Menu Setting the video signal formatTo select 3.58NTSC Once you have checked the frequency » Signal Info. MenuVideo standard formats Application External ControlsConnections Communication ParametersCommunication Format CommandExternal Controls Unit ID 1 and Unit IDCMD1 CMD2 LEN Command Reference ListPower OFF Power onInput Switch Change Audio Mute on Volume Gain DataAudio Mute OFF Contrast Gain DataSharpness Gain Data Bright Gain DataTint Gain Data Color Gain DataWhite BAL. Select Image MEM. SelectGreen Gain Data RED Gain DataBlue Gain Data VID NR Mode SETTreble Gain Data Bass Gain DataAspect Ratio Select Balance Gain DataShift Gain Data Size Gain Data Clock Gain Data Phase Gain DataOSD ADJ. Gain Data OSD SelectAuto OFF Select Cinema Mode SETSidebar LEV. SET Pixl Protect SET 33 RGB3 ADJ. SelectImage Sweep SET Inverse SETAudio Select SET FactoryRGB Select BNC SelectLanguage Select HD Select100 Frequency Request Video Standard Select101 102 Input Mode Request103 Video ADJ Request104 Auto Select RequestModel Name Request Failure Mode Request105 Computer input signals supported by this system Table of Signals Supported106 107 Table of Signals SupportedPAL625P 109 Troubleshooting110 Troubleshooting111 Specifications112 Specifications113 Dimensions114 Dimensions115 VP-60RUMA-010550