Vidikron VP-60, VP-42HD Perform the following operations, S1/S2 Settings, PLUG/PLAY Settings

Page 60

Information

■S1/S2 Settings

AUTO	Adjusts the screen size automatically according to
the S1/S2 video signal.
OFF	Turns the S1/S2 funtion off.

■Restoring the factory default settings

Select “FACTORY” under the SETTING 1 menu. Note that this also restores other settings to the factory defaults.

4.Once the setting is completed...

Press the EXIT button to return to the SETTING 3 screen.

To return to the main menu, press the EXIT button once more.

Setting the signal and black level for DVI signal Example: Setting the “PLUG/PLAY” mode on “STB/DVD”

Perform the following operations.

1.On the MAIN MENU, select “SETTING 2” , then press the MENU button. The “SETTING 2” screen appears.

2.Use the and buttons to select “DVI TYPE”, then press the MENU button. The “DVI TYPE” screen apprears.

OSD (On Screen Display) Controls

3.To set PLUG/PLAY mode to “STB/DVD” ...

Use the and buttons to select “STB/DVD”.

The mode switches as follows each time the and buttons is

pressed:
PLUG/PLAY:					PC		STB/DVD
BLACK LEVEL:					LOW		HIGH

			DVI TYPE

		PLUG/PLAY			:	STB/DVD
		BLACK LEVEL			:	HIGH
		SEL.	ADJ.			EXIT EXIT

Information

■ PLUG/PLAY Settings

PC............... When connected to the PC signal.

BLACK LEVEL is set to “HIGH” automatically. STB/DVD.... When connected to a satellite receiver, DVD, etc.

BLACK LEVEL is set to “HIGH” automatically.

■ BLACK LEVEL settings

LOW ........ When connected to the PC signal.

HIGH ....... When connected to the satellite receiver, DVD, etc.

Change “HIGH” into “OFF” if the black level apprears gray.

59

Image 60

Contents Page Table of Contents Introduction » The features you’ll enjoy include Contents of the packageOptions » Precautions Important Information» Warnings and Safety Precautions Important Information» To avoid damage and prolong operating life » Plasma monitor cleaning procedure Limited Warranty What is Covered Under the Terms of this Limited WarrantyEffective Warranty Date Limited WarrantyImportant Warranty Registration RIGHTS, Limits and ExclusionsAdditional Information VidikronHOW to Attach Options to the Plasma Monitor Ventilation Requirements for enclosure mountingPart Names and Functions » Front View» Rear View / Terminal Board AUDIO1, AUDIO2, AUDIO3External Control Rear View / Terminal Board Y Cb/Pb» Remote Control Remote Control Displays the source settings on the screenDisplay Light» Battery Installation and Replacement » Handling the remote control » Operating RangeInstallation VideoInstallation » Connecting Your PC or Macintosh Computer» Connecting Your VCR or Laser Disc Player » Connecting Your DVD Player» Pin Assignment and Signal Levels for 15 pin RGB analog RGB» Power » VolumeBasic Operations » Mute» Timer OFF To set the timer offTo cancel the off timer Basic OperationsAspect Ratio Controls » Aspect Ratio Operations ManualIntelliwide mode Aspect Ratio Controls» Aspect Ratio Operation with Computer Signals Within 3 secondsChange the adjustments or the settings that are stored Button on the remote control to return to the main menuOSD On Screen Display Controls » Menu Operations Memory. The change is stored until you change it againAdjust OSD On Screen Display ControlsImage HD Type Language » Picture Adjust Menu Adjusting the pictureUse the and buttons to adjust the contrast Example Setting the Factory mode Once the adjustment is completedTo set to Factory Types of picture modes LW BLK1Once the setting is completed Reducing noise in the pictureTypes of noise reduction Setting the White Balance See below to set White Balance AdjustAdjusting the color to the desired level Adjust the white balance using the and buttons Adjusting the white balanceChanging the Gamma Curve Making the Dither adjustments Gamma Curve settingsAdjusting the colors Dither settingsDiffuse » Audio Setup Menu To continue adjusting the audioColor Chart settings Audio setup menuSetting the allocation of the audio connectors Example Setting Audio INPUT1 to VideoTo set the Audio INPUT1 to VIDEO2 » Image Options Settings Menu To select a modeTo adjust the vertical position To continue making other computer image adjustmentsAdjusting the Computer Adjusting the position of the imageRestoring the factory defaults settings OFF» Setting 1 Settings Menu Setting the on-screen menuTo set the Display OSD to OFF Setting the BNC connectors To set the BNC Input mode to CompOSD Orbiter settings BNC Input settingsIt is set to RGB and can not be adjusted Example Setting the RGB Type mode to AutoTo set the RGB select mode to Auto RGB Type modesExample Setting the 1080B mode to To set the HD Type mode to 1080BSetting the Input Skip To set the Input Skip mode to OFFInput Skip settings HD Type modesResetting to the default values Use the and buttons to select ON, then press the Menu button» Setting 2 Menu Setting the Auto Off for computer imagesTo turn the Auto Off function on Power / Standby indicator Setting the picture to suit the moviePerform Steps 1-2 of Pixl PROTECT, then Orbiter settings OrbiterAdjust the Orbiter function manually Orbiter Function settingsPerform Steps 1-3 of ORBITER, then InverseSetting the time for INVERSE/WHITE Setting the timePerform Steps 1-3 of INVERSE, then Press the Exit button to return to the Pixl Protect screenExample Setting Image Sweep to on Image SweepPerform Steps 1-3 of Image SWEEP, then Setting the Sidebar Lev. for the sides of the screen Soften settingsPress the Exit button to return to the Image Sweep screen SoftenTo adjust the Sidebar LEV Use the and buttons to adjust the Sidebar LEVSetting the screen size for S1/S2 video input Sidebar LEV. settingsS1/S2 Settings PLUG/PLAY SettingsBlack Level settings Perform the following operations» Setting 3 Menu Using the timerPreset Time Perform Steps 1-2 of TIMER, thenPreset Time settings Daylight Saving TimeDAY HourProgram Timer Use the and buttons to select ProgramON/OFF Hour Setting the Default Input To set the Default Input to VIDEO2Use the and buttons to select VIDEO2 Input Select settings → RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ←→ RGB3 ↔ RGB1 ↔ HD2 ↔ HD1 ← Enabling/disabling the front panel controlsExample Setting OFF Perform the following operations To set the IR Enable to OFFControl Lock settings To set the Control Lock to onLoop Out Setting IR Enable settingsLoop OUT settings To set the Loop OUT to onID Number Setting To reset back to ALL Press the Clear buttonID Number settings When the ID Number has been setVideo Wall Setting Use this feature to configure a 2×2 or 3×3 video wallSet the 2x2 or 3x3 video wall Example Setting Set the position of each display Example SettingDivider Perform Steps 1-2 of Video WALL, thenDISP. Mode Video Wall Position settingsPress the Exit button to return to the Video Wall screen Auto IDAuto ID settings UseOn Delay Power on delay On Delay settings Video WallRepeat Timer Reptr LUM SET Link settingsUse the and buttons to select Reptr Time Reptr Time settings Divider Source» Language Settings Menu Setting the language for the menusLanguage settings English German French Spanish Italian To select DeutschSetting the video signal format » Video Standard MenuTo select 3.58NTSC » Signal Info. Menu Once you have checked the frequencyVideo standard formats External Controls ApplicationConnections Communication ParametersCommand Communication FormatExternal Controls Unit ID 1 and Unit IDCommand Reference List CMD1 CMD2 LENPower on Power OFFInput Switch Change Volume Gain Data Audio Mute onAudio Mute OFF Contrast Gain DataBright Gain Data Sharpness Gain DataColor Gain Data Tint Gain DataImage MEM. Select White BAL. SelectRED Gain Data Green Gain DataVID NR Mode SET Blue Gain DataBass Gain Data Treble Gain DataBalance Gain Data Aspect Ratio SelectShift Gain Data Size Gain Data Phase Gain Data Clock Gain DataOSD Select OSD ADJ. Gain DataCinema Mode SET Auto OFF SelectSidebar LEV. SET 33 RGB3 ADJ. Select Pixl Protect SETInverse SET Image Sweep SETFactory Audio Select SETBNC Select RGB SelectHD Select Language Select100 Video Standard Select Frequency Request101 Input Mode Request 102Video ADJ Request 103Auto Select Request 104Failure Mode Request Model Name Request105 Table of Signals Supported Computer input signals supported by this system106 Table of Signals Supported 107PAL625P Troubleshooting 109Troubleshooting 110Specifications 111Specifications 112Dimensions 113Dimensions 114VP-60 115RUMA-010550