Vidikron VP-42HD Example Setting Image Sweep to on, Perform Steps 1-3 of Image SWEEP, then

Page 57

OSD (On Screen Display) Controls

IMAGE SWEEP

When this is set to ON, a white vertical bar moves repeatedly from the left and of the screen to the right end at a constant speed.

Example: Setting “IMAGE SWEEP” to “ON”

Perform Steps 1-2 of PIXL PROTECT, then...

3.Use the and buttons to select “IMAGE SWEEP”.

4.Use the and buttons to select “ON”. The mode switches as follows each time the or button is pressed:

OFF ON

PIXL PROTECT

LUM. SETTING			:	AUTO
ORBITER			:	OFF
INVERSE			:	OFF

IMAGE SWEEP			:	ON
SOFTEN			:	OFF
SEL.	ADJ.			EXIT EXIT

Information

■IMAGE SWEEP

ON	The white vertical bar appears. You can set the time by
	pressing the MENU button while “ON” is set.
OFF	Image sweep mode does not funtion.

Setting the time for IMAGE SWEEP Set a time duration and the speed.

Example: Setting to that the IMAGE SWEEP mode starts in 30 minutes and proceeds for one hour and a half.

Perform Steps 1-3 of IMAGE SWEEP, then...

4.Use the and buttons to select “ON”, then press the MENU button. The “IMAGE SWEEP” screen appears.

5.Adjust the time using the and buttons. The mode switches as follows each time the or button is pressed:

• ACTIVE

ON 00H03M 00H06M ...... 12H42M 12H45M

• STANDBY

00H03M 00H06M 00H09M ...... 12H42M 12H45M

• SPEED

		1	2	3		4	5
		1	2	3		4	5

			IMAGE SWEEP

		ACTIVE			:	01H30M
		STANDBY		:		02H00M
		SPEED		:		3
		SEL.		ADJ.			EXIT EXIT

56

Image 57

Contents Page Table of Contents Introduction » The features you’ll enjoy include Contents of the packageOptions Important Information » PrecautionsImportant Information » Warnings and Safety Precautions» To avoid damage and prolong operating life » Plasma monitor cleaning procedure What is Covered Under the Terms of this Limited Warranty Limited WarrantyLimited Warranty Effective Warranty DateImportant Warranty Registration RIGHTS, Limits and ExclusionsVidikron Additional InformationVentilation Requirements for enclosure mounting HOW to Attach Options to the Plasma Monitor» Front View Part Names and Functions» Rear View / Terminal Board AUDIO1, AUDIO2, AUDIO3External Control Y Cb/Pb Rear View / Terminal Board» Remote Control Displays the source settings on the screen Remote ControlDisplay Light» Battery Installation and Replacement » Operating Range » Handling the remote controlVideo Installation» Connecting Your PC or Macintosh Computer Installation» Connecting Your DVD Player » Connecting Your VCR or Laser Disc PlayerRGB » Pin Assignment and Signal Levels for 15 pin RGB analog» Volume » PowerBasic Operations » MuteTo set the timer off » Timer OFFTo cancel the off timer Basic Operations» Aspect Ratio Operations Manual Aspect Ratio ControlsAspect Ratio Controls Intelliwide modeWithin 3 seconds » Aspect Ratio Operation with Computer SignalsButton on the remote control to return to the main menu Change the adjustments or the settings that are storedOSD On Screen Display Controls » Menu Operations Memory. The change is stored until you change it againOSD On Screen Display Controls AdjustImage HD Type Language » Picture Adjust Menu Adjusting the pictureUse the and buttons to adjust the contrast Once the adjustment is completed Example Setting the Factory modeTo set to Factory Types of picture modes LW BLK1Once the setting is completed Reducing noise in the pictureTypes of noise reduction Setting the White Balance See below to set White Balance AdjustAdjusting the color to the desired level Adjust the white balance using the and buttons Adjusting the white balanceChanging the Gamma Curve Gamma Curve settings Making the Dither adjustmentsAdjusting the colors Dither settingsDiffuse To continue adjusting the audio » Audio Setup MenuColor Chart settings Audio setup menuSetting the allocation of the audio connectors Example Setting Audio INPUT1 to VideoTo set the Audio INPUT1 to VIDEO2 To select a mode » Image Options Settings MenuTo adjust the vertical position To continue making other computer image adjustmentsAdjusting the position of the image Adjusting the ComputerRestoring the factory defaults settings OFF» Setting 1 Settings Menu Setting the on-screen menuTo set the Display OSD to OFF To set the BNC Input mode to Comp Setting the BNC connectorsOSD Orbiter settings BNC Input settingsExample Setting the RGB Type mode to Auto It is set to RGB and can not be adjustedTo set the RGB select mode to Auto RGB Type modesTo set the HD Type mode to 1080B Example Setting the 1080B mode toTo set the Input Skip mode to OFF Setting the Input SkipInput Skip settings HD Type modesUse the and buttons to select ON, then press the Menu button Resetting to the default values» Setting 2 Menu Setting the Auto Off for computer imagesTo turn the Auto Off function on Setting the picture to suit the movie Power / Standby indicatorPerform Steps 1-2 of Pixl PROTECT, then Orbiter Orbiter settingsOrbiter Function settings Adjust the Orbiter function manuallyPerform Steps 1-3 of ORBITER, then InverseSetting the time Setting the time for INVERSE/WHITEPerform Steps 1-3 of INVERSE, then Press the Exit button to return to the Pixl Protect screenExample Setting Image Sweep to on Image SweepPerform Steps 1-3 of Image SWEEP, then Soften settings Setting the Sidebar Lev. for the sides of the screenPress the Exit button to return to the Image Sweep screen SoftenUse the and buttons to adjust the Sidebar LEV To adjust the Sidebar LEVSetting the screen size for S1/S2 video input Sidebar LEV. settingsPLUG/PLAY Settings S1/S2 SettingsBlack Level settings Perform the following operationsUsing the timer » Setting 3 MenuPreset Time Perform Steps 1-2 of TIMER, thenDaylight Saving Time Preset Time settingsDAY HourProgram Timer Use the and buttons to select ProgramON/OFF Hour Setting the Default Input To set the Default Input to VIDEO2Use the and buttons to select VIDEO2 → RGB3 ↔ RGB2 ↔ RGB1 ↔ HD1 ← Input Select settings→ RGB3 ↔ RGB1 ↔ HD2 ↔ HD1 ← Enabling/disabling the front panel controlsTo set the IR Enable to OFF Example Setting OFF Perform the following operationsControl Lock settings To set the Control Lock to onIR Enable settings Loop Out SettingLoop OUT settings To set the Loop OUT to onTo reset back to ALL Press the Clear button ID Number SettingID Number settings When the ID Number has been setUse this feature to configure a 2×2 or 3×3 video wall Video Wall SettingSet the position of each display Example Setting Set the 2x2 or 3x3 video wall Example SettingDivider Perform Steps 1-2 of Video WALL, thenVideo Wall Position settings DISP. ModePress the Exit button to return to the Video Wall screen Auto IDUse Auto ID settingsOn Delay Power on delay Video Wall On Delay settingsRepeat Timer Reptr LUM SET Link settingsUse the and buttons to select Reptr Time Divider Source Reptr Time settingsSetting the language for the menus » Language Settings MenuLanguage settings English German French Spanish Italian To select DeutschSetting the video signal format » Video Standard MenuTo select 3.58NTSC » Signal Info. Menu Once you have checked the frequencyVideo standard formats Application External ControlsConnections Communication ParametersCommunication Format CommandExternal Controls Unit ID 1 and Unit IDCMD1 CMD2 LEN Command Reference ListPower on Power OFFInput Switch Change Audio Mute on Volume Gain DataAudio Mute OFF Contrast Gain DataSharpness Gain Data Bright Gain DataTint Gain Data Color Gain DataWhite BAL. Select Image MEM. SelectGreen Gain Data RED Gain DataBlue Gain Data VID NR Mode SETTreble Gain Data Bass Gain DataAspect Ratio Select Balance Gain DataShift Gain Data Size Gain Data Clock Gain Data Phase Gain DataOSD ADJ. Gain Data OSD SelectCinema Mode SET Auto OFF SelectSidebar LEV. SET Pixl Protect SET 33 RGB3 ADJ. SelectImage Sweep SET Inverse SETAudio Select SET FactoryRGB Select BNC SelectHD Select Language Select100 Video Standard Select Frequency Request101 102 Input Mode Request103 Video ADJ Request104 Auto Select RequestFailure Mode Request Model Name Request105 Table of Signals Supported Computer input signals supported by this system106 107 Table of Signals SupportedPAL625P 109 Troubleshooting110 Troubleshooting111 Specifications112 Specifications113 Dimensions114 Dimensions115 VP-60RUMA-010550